Products in Sports & Recreation: Processing Aid

Masterbatch PRZ PA708 is a process aid masterbatch designed to improve the melt processing of host polymers. They may also improve esthetic properties of finished articles by removing flow marks and die lines.

Mediaplast EV/F is an effective processing aid for the treatment of very sticky polymers, mainly EVA compounds. EVA types with a vinyl acetate content of more than 40 % tend to stick to open mills, internal mixers and even extruder screws.

Pertac/GR is a multifunctional process aid based on 1.2-polybutadiene converted into free-flowing granules.

M.G. Polyblends SI-10 has developed 50% concentrate of ultra high molecular weight polydimethyl siloxane in polypropylene carrier for use of automotive interiors, appliances and all other applications which are using PP, Talc-filed PP, TPO's, Talc-filed TPO's as the base polymer. This masterbatch is mainly used for low gloss appearance along with good scratch and abrasion resistance.

SCG Chemicals WD2110P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Natro-Cel R-A is a blend of sodium sulfonate and selected process oils on silicon dioxide. Used as an effective dry-form plasticizer and processing aid for NR, SBR, IR, and IIR. Suggested for open-roll mill mixing and used in emulsification, corrosion and wetting applications.

Mediaplast AT is a very effective process aid to improve flow properties and to reduce the tackiness of rubber compounds regardless of the polymer used. Processing of CR and ACM compounds in par-ticular is significantly improved by adding a small amount of Mediaplast AT. It improves the demolding properties of technical rubber parts. The sticking of uncured compounds to internal mixers, open mills and conveyor belts will be visibly diminished by the use of Mediaplast AT.

Haftolat or the dry form, Haftolat/P, are very effective process aids produced from EPM rubber. I

M.G. Polyblends SI-06 has developed 50% concentrate of ultra high molecular weight polydimethyl siloxane in polypropylene carrier for use of automotive interiors, appliances and all other applications which are using PP, Talc-filed PP, TPO's, Talc-filed TPO's as the base polymer. This masterbatch is mainly used for low gloss appearance along with good scratch and abrasion resistance.

SCG Chemicals WD2020P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Kettlitz-Dispergator FD is a highly effective processing aid for compounds in alimentary contact. It has been developed referring to the regulations of FDA and BfR XXI (former BGVV resp. BGA regulation). It is a combination of zinc salts and hydrocarbons in surface active agents.

Mediaplast WH-P is a Processing aid and homogenizing agent with non-staining properties in order to improve the stickiness of synthetic rubber compounds. Especially in NBR, EPDM, SBR and EVA the application of Mediaplast WH results in shorter mixing times and better homogeneity.

SCG Chemicals WD2040P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Dispergator KB contains 25 % more active material and less moisture than Dispergator DS. It fa-vourably can be used in all rubber compounds which are intended to be cured by UHF, LCM or hot air. It also has good compatibility with most polymers.

Natro-Cel 97-A is an aromatic hydrocarbon, silicon-dioxide blend plasticizer/processing aid for NR, SBR, CR, IIR, NBR, BR, EPM, and EPDM. It aids filler dispersion, and gives rapid incorporation. Large loadings may retard cure slightly. Small Mooney viscosity reduction.

M.G. Polyblends SI-09 has developed 50% concentrate of ultra high molecular weight polydimethyl siloxane in polypropylene carrier for use of automotive interiors, appliances and all other applications which are using PP, Talc-filed PP, TPO's, Talc-filed TPO's as the base polymer. This masterbatch is mainly used for low gloss appearance along with good scratch and abrasion resistance.

Haftolat or the dry form, Haftolat/P, are very effective process aids produced from EPM rubber. I

Dispergator OX is a Polymer- and water-free granulated processing aid, suitable for all natural and synthetic elastomers, and especially helpful in polymer blends. Dispergator OX is particularly recommended for pressureless continuous curing processes, as it con-tains no moisture.

Mediaplast WH is a Processing aid and homogenizing agent with non-staining properties in order to improve the stickiness of synthetic rubber compounds. Especially in NBR, EPDM, SBR and EVA the application of Mediaplast WH results in shorter mixing times and better homogeneity.

Kettlitz-Dispergator SI/GR is a new generation of processing aid based on a silicone combination. The proc-ess aid has been developed especially for EPDM and EVA compounds to improve processability.

Flexricin P4 DLC-A is a methyl acetyl ricinolate silicon dioxide blend plasticizer and processing aid for low temperature specification rubber compounds. Low volatility.