Products in Other Consumer Goods Applications: Fluoropolymers

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

Maskom masterbatch & Compound Technologies M 85091 is a PROCESS AID (PPA). Guarantees uniform melting, low friction and smooth product surface for the extruder. Removes burns in dead zones of the extruder, avoids stripe and herringbone formation on the film..

66% Fluorine copolymers formulated for injection molding. GP-LV compounds also exhibit the improved hot tear resistance of their higher viscosity counterparts.

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

Contamac F2 High comprises of fluorosilicone acrylate chemistry, designed to promote the known advantages of improved wettabilty and deposit resistance. This workhorse material has excellent machining characteristics and is ideal for thin lens designs. In addition to routine spherical fits this material can also be used with more sophisticated designs. The fitting characteristics are predictable, as the range offers a variety of Dk values but has the same chemistry design.

FluoroTac is a clear Perfluoropolyether pressure sensitive adhesive in a low boiling point fluorinated solvent. Films 3 to 4 mills thick dry in minutes under ambient conditions to a moderate tac. FluoroTac is resistant to UV light and non-fluorinated solvents. Films have excellent adhesion to most substrates, including PTFE. The FluoroTac use temperature range is -160°F to 140°F.

Polimersan Plastics Politef ( P.T.F.E. ) is highly resistant to chemical liquids and solvents.

66% Fluorine copolymers formulated for injection molding. GP-LV compounds also exhibit the improved hot tear resistance of their higher viscosity counterparts.

66% Fluorine copolymers formulated for injection molding. GP-LV compounds also exhibit the improved hot tear resistance of their higher viscosity counterparts.

Flontech PTFE FT-GR15-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Flontech Modified PTFE erived from standard PTFE, modified PTFE is a copolymer of tetrafluoroethylene and a small quantity of a perfluorinated modifier (perfluoropropyl vinyl ether, PPVE). The modifier content is less than 1%.

Silopren™ FSL 7586/40 by Momentive Performance Materials is comprised of Fluoroelastomer. It is commonly used as Molding Resin for a variety of applications in Aerospace and Automotive. It is available in Solid form.

Flontech PTFE FT-CF10-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

66% Fluorine copolymers formulated for injection molding. GP-LV compounds also exhibit the improved hot tear resistance of their higher viscosity counterparts.

Contamac F2 Mid comprises of fluorosilicone acrylate chemistry, designed to promote the known advantages of improved wettabilty and deposit resistance. This workhorse material has excellent machining characteristics and is ideal for thin lens designs. In addition to routine spherical fits this material can also be used with more sophisticated designs. The fitting characteristics are predictable, as the range offers a variety of Dk values but has the same chemistry design.

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

Contamac F2 Low comprises of fluorosilicone acrylate chemistry, designed to promote the known advantages of improved wettabilty and deposit resistance. This workhorse material has excellent machining characteristics and is ideal for thin lens designs. In addition to routine spherical fits this material can also be used with more sophisticated designs. The fitting characteristics are predictable, as the range offers a variety of Dk values but has the same chemistry design.

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

Flontech PTFE FT-CAR25-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

66% Fluorine copolymers formulated for injection molding. GP-LV compounds also exhibit the improved hot tear resistance of their higher viscosity counterparts.

66% Fluorine copolymers formulated for molding complex geometric shapes. GP compounds exhibit improved hot tear resistant properties and offer a variety of colors.

Flontech PTFE FT-CARR25-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Flontech PTFE FT-GL25-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Flontech PTFE FT-STST50-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Maskom masterbatch & Compound Technologies M 85092 is a PROCESS AID (PPA). Guarantees uniform melting, low friction and smooth product surface for the extruder. Removes burns in dead zones of the extruder, avoids stripe and herringbone formation on the film..

Flontech PTFE FT-BRR40-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

66% Fluorine copolymers formulated for injection molding. GP-LV compounds also exhibit the improved hot tear resistance of their higher viscosity counterparts.

Features/Benefits: Color: Dark Gray Particularly suitable for water and steam service Excellent general purpose material for heat and wear resistance Recommended for dry and poorly lubricated applications Working Temperature Range: -268° to +260°C [-450° to +500°F]