Products in Consumer Goods: Polyethylenes

Osterman & Company Inc. Osterlene® HD030-AS is a blow molding grade high density polyethylene copolymer containging and antistat additive. It provides a good balance of stiffnes and stress-crack resistance.Applications for HD030-AS include drainage pipes, food packaging, household and industrial chemical containers, pharmaceutical packaging, thermoformed parts, and thin gage sheet.This product contains antistatic and thermal stabilizer.

kazanorgsintez HDPE PE2NT22–12 is High Density Polyethylene grade used for various applications.

Supazote® is a closed cell, cross-linked ethylene co-polymer block foam manufactured using Zotefoams unique production process. Supazote® 5SEM26WE-0022 is a lightweight supersoft foam.

Elastocon® 2865PE thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2865PE is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2865PE can be overmolded and coextruded with polyethylene.Elastocon® 2865PE is supplied as ready to use pellets in 50 lb. quantities.

Michem® Emulsion 93235 - A phenol-free additive best used in water-based coatings where improved slip, rub resistance, hardness, or block resistance is needed. It provides effective mar resistance in floor polish formulations, and shine and mar resistance in auto polish formulations.

KoeppCell® K/PE 35 A is closed-cell having soft-elastic PE foam. It is chemically crosslinked polyethylene foam.

C.I.E.R R-HDPE is a type of HDPE derived from post-consumer container, mainly used in the production of membranes, pipes and items for street forniture.

AtenPly GPE35 are thin sheets of continuous reinforcement fibers impregnated with thermoplastic resin. It is made direct from the fiber roving and thermoplastic melt using proprietary technology developed by Jonam Composites Ltd. This cost-effective efficient process produces light weight, high-strength ,well impregnated, smooth tape with unidirectional fiber reinforcement.

Microlin HL29 is a tough ‘new generation’ Hexene Linear High Density rotational molding powder designed to produce moldings of extremely high rigidity combined with high impact strength, particularly at low temperatures.The polymer and powder flow properties of HL29 have been designed to give good mouldability over a wide processing window, particularly for more demanding rotational molding applications such as Kayaks, Canoes and Marine Leisure Craft.

Epsotech PE HA2 NC is a single layer product made of high molecular weight Polyethylene. Its low temperature, mechanical strength, and abrasion resistance properties have all significantly improved.

Prime Polymers HI-ZEX® 8200B is a high Density Polyethylene product. It can be processed by blow molding and is available in Asia Pacific, Europe, or North America.

Traditional wooden cutting boards are no match for boards fabricated with Densetec® Cutting Board from Polymer Industries. Wood and other materials absorb bacteria, splinter, chip, swell, peel, rot, warp, bend and crack. Densetec® Cutting Board eliminates those problems, substantially outlasting cutting boards made from materials other than HDPE. Densetec® Cutting Board is engineered for durability, low maintenance and safety. Its textured, matte surface safely holds food in place without slipping. The "natural" bright white color is favored for its sanitary look. Knives stay sharp when cutting on Densetec® Cutting Board. Instead of striking a rigid surface that dulls the blade, Densetec® Cutting Board gives on contact. Because of its unique molecular structure, cuts seal and become indiscernible. Over time, using Densetec® Cutting Board can lead to significant savings when compared with other materials. Densetec® colored cutting board is the perfect choice to help prevent cross contamination of food borne pathogens such as salmonella and E-coli. By color coding the food to the color of the cutting board such as blue for fish, red for red meat, yellow for poultry, etc., the risk of spreading these dangerous microorganisms is greatly diminished.

Elastocon® 2825PE thermoplastic elastomer has been developed for applications that require rubber-like properties and a good surface finish. Elastocon® 2825PE is FDA compliant and well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 2825PE can be overmolded and coextruded with polyethylene.Elastocon® 2825PE is supplied as ready to use pellets in 50 lb. quantities.

Saudi Polymers HHM 5502 BN has high molecular weight, ethylene-hexene copolymer is tailored for lightweight blow molded containers that require excellent stiffness, exceptional processability, durability.

7109 PTFE-Glass Fabric is a Premium Grade PTFE-Glass Fabric offers optimum release and durability in harsh environments. Applications include reusable pan liners for cooking and baking, laminate separator sheets, tortilla and pizza crust belts, heat sealing and applications where fabric weave impression is undesirable.

Hanwha Solutions LDPE 963 is manufactured by autoclave process and designed for variety of extrusion coating application such as paper and Tarpaulin coating etc. LDPE 963 is well known for its excellent processability and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.

Trecora Chemical CWP2030 is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP2030 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

HD050-GP is designed for blow molding applications. It may be used as a sheet extrusion thermoforming resin or a general purpose blow molding resin.

Avery Dennison™ FM 2132 is a 36 mil double coated white polyethylene foam with a high shear rubber adhesive. It bonds to a wide variety of low surface energy materials and features high shear strength and the ability to fill gaps. It is commonly used in general industrial foam applications.

Forlene® HDPE is a special compound, recycled and recyclable, based on high density polyethylene (HDPE), produced and marketed by Forever Plast S.p.A., in national and international market and intended to create plastic products of different kinds of application.

PROlen 9000 MOS₂ is a PE 1000 -UHMW- enriched with molybdenum disulfite and causes a significantly improved sliding behavior with simultaneously reduced abrasion values.

Trecora Chemical CWP400 is a polyethylene wax. Exhibits abrasion-, rub- and mar resistance. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can be used to control gloss to achieve a desired matt effect. CWP400 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Advancene™ EM-5333-AAH HDPE Resin is a multipurpose lx)lymer designed for high speed production of blow molded containers used to package household industrial chemicals (e.g detergents, bleach, fabric softeners), toiletries and cosmetics (e.g shampoos, creams, lotions, etc.), health and medical aids, and food products. In addition, it can be blow molded into other thin-walled parts and houseware items, and can be extruded into profiles.

TimberLine™ Woodgrain HDPE offers the most authentic, high-end look and texture of wood…and set your imagination free. TimberLine™ captures the eye with embossed woodgrain and unique coloring sheet to sheet, opening up new potential for cabinetry, kitchens, landscape architecture, marine use and other applications. Delivering the high-end, welcoming atmosphere normally achieved with wood, and retaining its natural color and wood texture. Through technologies that offer the highest level of performance and durability, TimberLine is low maintenance and worry-free. Designed with sustainability in mind, it offers unmatched versatility in exploring design possibilities, and even the flexibility to be heated and shaped for custom projects. Now you can transform any outdoor environment into a beautiful space for a lifetime of enjoyment.

Michem® Lube 190 - A wax emulsion provides mar, rub, block, and scratch resistance, and improved water resistance in coatings and graphic arts formulations.

PLASTOMER® 1080B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1080B/N is a fully crosslinked product and can be reused without scrap during processing.

Inhance Fluoro-Seal UH-1080 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Tatrafan REGRANULATE EA-FAR is made from waste of printed polyamide/polyethylene film, fromPA/PE film production in CHEMOSVIT FÓLIE a.s. The film waste therefore can contain also printing inks. Regran-ulate has the regular shape, with the dimension 3-5 mm, and not specified color. The regranulate is suitable for further processing into technical plastic products and consumer plastic items by injection molding, pressing or extrusion technology. The material is not suitable for products with the direct con-tact with food. Each customer is required to check, this material for the intended use.

Prime Polymers Neo-Zex™ 2006H is a Linear Low Density Polyethylene product. It can be processed by blow molding and is available in Asia Pacific, Europe, or North America. Applications of Neo-Zex™ 2006H include containers and plumbing/piping/potable water.Characteristics include: Clarity Impact Resistant

A1048 PTFE-Glass Fabric is a Premium Grade PTFE-Glass Fabric offers optimum release and durability in harsh environments. Applications include reusable pan liners for cooking and baking, laminate separator sheets, tortilla and pizza crust belts, heat sealing and applications where fabric weave impression is undesirable.

PETILEN H2-21T is a low density polyethylene resin produced by high pressure tubular process. Having medium average molecular weight, the product is developed for general purpose applications. PETILEN H2-21T contains no additives.

Itilen Ld N Bk is a Low-density polyethylene (PELD). It is mainly used in injection molding.

High stiffness, Good chemical resistance.

Arboblend® HT2 Natur combines a great number of material types and a wide range of property profiles. The materials on offer are up to 100% bio-based. Depending on the formula, ARBOBLEND® materials contain biopolymers such as polyhydroxyalkanoates (PHA), polycaprolactone (PCL), polyester (e.g. bio-PET), starch, polylactic acid (PLA), bio-polyolefins (bio-PE), bio-polyamides (bio-PA), lignin, natural resins, natural waxes, natural oils, natural fatty acids, cellulose, organic additives and natural reinforcing fibers. ARBOBLEND® materials are designed to be biodegradable or resistant depending on the intended application. Biodegradability is a property that offers an additional benefit in applications such as urns, plant aids, mulch films and many other uses.

EnLene™ LDPE02-NA by EnCom Polymers is comprised of Low Density Polyethylene. It is commonly used

Hanwha Solutions LDPE 961 is manufactured by autoclave process and designed for variety of extrusion coating application such as flexible packaging, paper coating etc. LDPE 961 is well known for its excellent neck-in, draw-down and high quality assurance. This product complies with U.S. FDA regulation 21 CFR 177.1520 (c) 2.1.