Products in Carpet & Upholstery: Sporting Goods

LNP LUBRILOY D20009 compound is based on Polycarbonate (PC) resin containing proprietary lubricant. Added features of this grade include: Flame Retardant, Wear Resistant.

Tasnee PP H1045 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 4.5 g/10min. Tasnee PP H1045 is designed for high extrusion speed lines to make stretch tapes, offering low water-carry-over and low shrinkage. Good balance of strength, shrinkage, splitting tendency. It is compliant to food contact regulations.

MARFRAN® B TS is a TPE-SSBS base polyolefin polymers or styrenic polymers with SBS elastomer. Compounds for injection and extrusion molding: soft to the touch, easy to work, colorable, high transparency, highly elastic, resistant to abrasion, in various flexural and hardness modules

Liwang Chemical Nantong LP-9006 fluorescent green is a good heat resistance, maximum temperature up to 300 degrees, no formaldehyde, does not contain any heavy metals in the environment-friendly fluorescent pigments. Applicable to the processing temperature higher than 200 degrees of masterbatch and injection type of all kinds of plastic products.

MARFRAN® B CV2 is a TPE-SSBS base polyolefin polymers or styrenic polymers with SBS elastomer. This compounds for injection and extrusion molding, soft to the touch, easy to work, colorable, high transparency, highly elastic, resistant to abrasion, in various flexural and hardness modules

Liwang Chemical Nantong LP-9007 fluorescent purple is a good heat resistance, maximum temperature up to 300 degrees, no formaldehyde, does not contain any heavy metals in the environment-friendly fluorescent pigments. Applicable to the processing temperature higher than 200 degrees of masterbatch and injection type of all kinds of plastic products.

Liwang Chemical Nantong Permanent Yellow organic pigment W are used in Water-based ink.

Liwang Chemical Nantong Organic pigments benzidine yellow Gare used in Water-based ink, green phase.

Liwang Chemical Nantong LP-9004 fluorescent orange is a good heat resistance, maximum temperature up to 300 degrees, no formaldehyde, does not contain any heavy metals in the environment-friendly fluorescent pigments. Applicable to the processing temperature higher than 200 degrees of masterbatch and injection type of all kinds of plastic products.

Liwang Chemical Nantong LP-9008 fluorescence rose red is a good heat resistance, maximum temperature up to 300 degrees, no formaldehyde, does not contain any heavy metals in the environment-friendly fluorescent pigments. Applicable to the processing temperature higher than 200 degrees of masterbatch and injection type of all kinds of plastic products.

The natural cast polyamide reveals characteristics that are very close to the same ones found in Manifattura Cattaneo PA 6 G. It combines high mechanical resistance, rigidity and hardness with good resistance to wear and creep, as well as a good resistance to thermal aging and good machinability on machine tools.

MARFRAN® E FG1 is a TPE-SSBS base polyolefin polymers and others with SEBS elastomer. This Compounds for injection molding and extrusion: soft to the touch, it guarantees excellent resistance to aging and atmospheric agents, low compression set, high elasticity, easy to work, colorable and high transparency.

Liwang Chemical Nantong Organic pigment Permanent Yellow HR02 are used in PP, PVC, blown film.

Liwang Chemical Nantong Permanent Yellow organic pigment 2GS are used in pp, pvc.

MARFRAN® E FKK is a TPE-SSBS base polyolefin polymers and others with SEBS elastomer. This Compounds for injection molding and extrusion: soft to the touch, it guarantees excellent resistance to aging and atmospheric agents, low compression set, high elasticity, easy to work, colorable and high transparency.

Liwang Chemical Nantong LP-9005 fluorescent orange is a good heat resistance, maximum temperature up to 300 degrees, no formaldehyde, does not contain any heavy metals in the environment-friendly fluorescent pigments. Applicable to the processing temperature higher than 200 degrees of masterbatch and injection type of all kinds of plastic products.

Compared to virgin Manifattura Cattaneo PA 6.6 30% GF glass fiber reinforced polyamide exhibits improved mechanical strength, stiffness, dimensional stability and creep resistance, as well as excellent wear resistance retention and the ability to use at higher temperatures .

Liwang Chemical Nantong Organic pigment Permanent Yellow GR are used in Water-based ink.

MARFRAN® E M2 is a TPE-S SEBS base polyolefin polymers and others with SEBS elastomer. This Compounds for injection molding and extrusion: soft to the touch, it guarantees excellent resistance to aging and atmospheric agents, low compression set, high elasticity, easy to work, colorable, high transparency.

Liwang Chemical Nantong LP-9011 fluorescent red is a good heat resistance, maximum temperature up to 300 degrees, no formaldehyde, does not contain any heavy metals in the environment-friendly fluorescent pigments. Applicable to the processing temperature higher than 200 degrees of masterbatch and injection type of all kinds of plastic products.

MARFRAN® B F2 is a TPE-SSBS base polyolefin polymers or styrenic polymers with SBS elastomer. This Compounds for injection and extrusion molding, soft to the touch, easy to work, colorable, high transparency, highly elastic, resistant to abrasion, in various flexural and hardness modules