Products in Industrial & Assembly Adhesives: Oligomer

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UT-7792 is a bio-based urethane acrylate oligomer. (Development product) Its biomass degree is 71% while its mechanical properties are the same as a non-biomass grade UV-3300B, with higher elongation and very soft rubbery elasticity suitable for using UV-curable adhesives for electronics devices. Features Bio-based Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SHIKOH™ UV-3520TH is an aliphatic urethane acrylate oligomer with soft elasticity, good toughness and high elongation. It shows unique mechanical properties with various reactive diluents. Features Soft-Elastic type, Good toughness, High elongation Diluted in Tetrahydrofurfuryl Acrylate (THFA) (oligomer/ THFA = 70/30 wt%) Non-solvent (100% hardening ingredient) Unique mechanical properties with various reactive diluents Applications UV/ EB/ Thermal-curable adhesive UV adhesive for electric device use 3D printer, and Inkjet *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Bomar BR-202, an aromatic polyether urethane dimethacrylate, finds use in a diverse number of UV coating applications. BR-202 is valued for its strong bond strength, its affinity for glass, steel, and a variety of plastic substrates, and for its excellent elongation. BR-202 is also of value for its low initial color (despite its aromatic nature).

PHOTOMER® 6720 is a low viscosity hexa-functional aromatic urethane acrylate oligomer.

PHOTOMER® 6009 is a proprietary, non yellowing, aliphatic urethane acrylate oligomer developed for radiation curable systems. This premium oligomer of low viscosity eliminates the need to melt out the oligomer prior to use. PHOTOMER® 6009 is an excellent film former and it exhibits excellent light stability and outstanding haze, scratch and abrasion resistance.

PHOTOMER® 6628 is a hexa-functional aliphatic urethane acrylate for use in UV curable adhesives, inks and coatings.

Designer Molecules BMI-1500 is an amorphous, low molecular weight bismaleimide oligomer that exhibits good adhesion to a variety of substrates. It can be homo-cured via UV or free radical initiators to form tough, hydrophobic, cross-linked polyimides. The material has excellent low pH hydrolytic resistance and thermal stability. The amorphous nature of this imide-extended BMI allows it to form room-temperature-stable solutions in a variety of free radical reactive diluents. It is soluble in many common solvents such as toluene, xylene, MIBK, etc. .

Designer Molecules BMI-1700 is an amorphous, low molecular weight bismaleimide oligomer that exhibits good adhesion to a variety of substrates. It can be homo-cured via UV or free radical initiators to form tough, hydrophobic, cross-linked polyimides. The material has excellent low pH hydrolytic resistance and thermal stability. The amorphous nature of this imide-extended BMI allows it to form room-temperature-stable solutions in a variety of free radical reactive diluents. It is soluble in most aromatic and aliphatic solvents such as toluene, xylene, NMP, etc.

PHOTOMER® 6019 is a proprietary, non-yellowing aliphatic urethane oligomer developed for UV/EB curable systems. This medium viscosity acrylate resin exhibits good adhesion to flexible plastics, metal and glass. It is Recommended as a primary oligomer for secondary coatings in optical fibers, fiber-optic sensors and light pipes. Excellent weatherability, scratch, scuff and mar resistance are characteristics of this oligomer.

PHOTOMER® 5662 is a tetra functional oligomer used in UV/EB curable systems. The product exhibits a medium viscosity. It gives a high crosslinking density with a high reactivity.

PHOTOMER® 6892 is a proprietary low viscosity trifunctional aliphatic urethane acrylate that can be used to formulate low viscosity systems while maintaining high oligomeric concentrations. PHOTOMER® 6892 imparts flexibility into UV/EB cured coatings and inks.

PHOTOMER® 5930 is a tetra functional amine modified polyether acrylate used in UV/EB applications.

Designer Molecules BMI-5000 Toluene is an imide-extended bismaleimide oligomer that exhibits excellent toughness in the cured state with an intermediate cross-link density. It is soluble in aromatic solvents. It is an amber, waxy solid at room temperature and can be cast as a hot melt or from solution to form pliable, non-tacky films. This maleimide functional oligomer can be cured thermally, via UV irradiation, or in the presence of free-radical initiators to form a tough thermoset. BMI-5000 is supplied as a 50% solids solution in toluene. The material can also be supplied as a solid slab, powdered solid or in alternative solvents.

PHOTOMER® 6891 is a proprietary low viscosity difunctional aliphatic urethane acrylate that can be used to formulate low viscosity systems while maintaining high oligomeric concentrations. PHOTOMER® 6891 imparts flexibility into UV/EB cured coatings and inks.