Products in Paints & Coatings: Powder Coating

DCL 410 Carbon Black, PBk.6 (Granular) is a smaller particle size, low cost granular carbon black pigment. It is the most jet of our low-cost carbon blacks however, it has the highest viscosity. 410 is particularly suitable for coatings, plastics requiring excellent UV properties, and solvent-based inks.

DCL 333 Chromium Oxide Green, PG.17 (medium shade, G5099 type) is a high-quality, clean, light-to-medium-shade, very-stable green pigment that is unaffected by acids, alkalis, and solvents. It is heat-stable, offers excellent value, lightfastness, and weatherability, and is FDA-approved (Section 178.3297).

DCL RMXA Bismuth Vanadate, PY.184 is a lemon shade yellow pigment with excellent alkaline stability, weather fastness, heat stability, high saturation, and high opacity. It is recommended for high alkaline substrates and alkaline-containing systems like silicate plasters and stuccos, as well as in many polymers.

DCL 5033 Lemon Yellow, PY.34 is a pre-darkened, SO2-resistant, high-performance lemon shade yellow pigment with stir-in properties and is recommended for coating and plastic applications. This product is restricted to industrial and professional inks, coatings, plastics, and roadmarking (subject to regional legislation).

DCL 2GLMA Bismuth Vanadate, PY.184 is renowned for its highly saturated, bright yellow shades, outstanding opacity, chemical resistance, excellent weathering, and durability across the color gamut from pale tints to masstone. It is the standard reference for both solvent and waterborne systems in automotive, coil and other high-performance paints. Additionally, its superior covering power and durability make it a popular choice for general industrial paints.

DCL A2RU Indanthrone Blue, PB.60 is a high-performance green shade yellow for use in high-end coatings applications. Its superb weather fastness and chemical resistance make it ideal for automotive OEM, refinish, and fleet applications. Additionally, its enhanced rheology and low foam enable high mill base loadings in both aqueous and solvent-borne systems. For non-automotive applications, it is also excellent for use in architectural concrete coatings and high-end industrial coatings.

DCL 329-A Chromium Oxide Green, PG.17 (medium shade, G5099 type) is a high-quality, clean, medium-shade, very stable green pigment that is unaffected by acids, alkalis and solvents. 329-A is heat stable and offers excellent value, lightfastness, and weatherability. FDA-approved (Section 178.3297).

DCL 8120NM Syn Micronized Red Iron Oxide, PR.101 is a yellow-shaded red pigment composed of micronized synthetic red iron oxide, and is FDA-approved (Section 178.3297). It is suitable for use in various plastic applications, including PVC, PE, PP, PS, and PET, as well as decorative, industrial and powder coatings.

DCL Black 20C920 is a jet-black powder produced by high-temperature calcination. It has good UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding and non-migratory, has exceptional durability and hiding power, and is generally used in applications requiring resistance to heat, light, and weather. It is compatible with most resin systems and polymers, and it is non-warping. Typical applications include, but are not limited to, liquid and powder coatings, inks, dispersions, and other applications where equivalent pigment chemistry is used.

DCL 2GTA Bismuth Vanadate, PY.184 is a green-shaded yellow pigment with excellent alkaline stability, weather fastness, heat stability, high saturation, high opacity and good flow properties. DCC Yellow 2GTA is recommended for high-alkaline substrates and containing systems.

DCL 2283 Opaque Yellow, PY.83 is a medium-shaded diarylide yellow offering good opacity, lightfastness, excellent flow properties, and tinting strength. It is recommended to be used in inkjet and UV inks as well as automotive, aerospace, industrial, and powder coating applications.

DCL Black 10C928 is a jet-black powder produced by high-temperature calcination. It has good UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. Its exceptional durability and hiding power make it suitable for applications requiring resistance to heat, light, and weather. It is non-bleeding, non-migratory, and compatible with most resin systems and polymers, and is non-warping.

DCL AG110 Fine Satin Silver, <15 m is a silver-white transulcent pearlescent pigment with a satin finish. It is recommended for general industrial coatings, plastics and printing ink applications is recommended for general industrial coatings, plastics and printing ink applications. The product is FDA-approved (Section 178- 3297).

DCL 8817 Transparent Red Iron Oxide, PR.101 is a high performance transparent red iron oxide offering high color strength, weather resistance, and UV protection properties. 8817 is recommended for PVC plastics, automotive, aerospace, industrial, powder, and wood coatings, as well as solvent flexo inks.

DCL 3GMX Bismuth Vanadate, PY.184 is a new generation of Bismuth Vanadate pigment from Dominion Color Corporation that offers a highly attractive, greenish yellow shade with an exceptional color strength, high gloss, clean shade, and easy dispersion. It has been developed to be particularly suitable for industrial coatings.

DCL 1179 Perylene Red, PR.179 is a semi-transparent maroon shade with excellent fastness properties and is FDA-approved (Section 178.3297). It is primarily recommended for higher-quality industrial coatings, automotive OEM and refinishes, and plastics such as polyolefins, PVC, and PUR, and may also be suitable for styrene and other polymers.

DCL Black 30C965 is a jet-black powder produced by high-temperature calcination. It has good UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding and non-migratory, and has exceptional durability and hiding power. It is compatible with most resin systems and polymers, and it is non-warping. Typical applications include liquid and powder coatings, inks, dispersions, concrete, plastics, and other applications where equivalent pigment chemistry is used.

DCL 2093 Bismuth Vanadate, PY.184 DCC Yellow 2093 is a bright green-shaded yellow pigment with high color strength and good opacity. DCC Yellow 2093 exhibits very good weather fastness and is used primarily in industrial and decorative paint applications.

DCL 3153 Phthalocyanine Blue, PB.15:3 is a green-shaded blue pigment used for high-end coating applications where excellent weather fastness, opacity, and dispersion properties are required. It is a cost-effective alternative to other blue pigments and is widely used in decorative, automotive, aerospace, industrial, and powder coatings.

DCL 1219 Quinacridone Red Violet, PV.19 (E5B type) is a bright, yellow shade quinacridone with excellent overall properties. This pigment is FDA approved (Section 178.3297) and finds major applications in the following: Plastics such as PVC, PP, PS, PE and PET. Automotive/aerospace, decorative, powder and industrial coatings. Solvent flexo, water flexo, inkJet, UV and offset inks

DCL 386 Chromium Oxide Green, PG.17 (extra dark/camouflage) is a dark, stable green pigment that is unaffected by acids, alkalis, and solvents. It is heat stable and offers excellent lightfastness, weatherability, and high reflectivity in the infrared range, making it ideal for military and camouflage applications.

DCL 5610 Molybdate Orange, PR.104 (Sulfur Dioxide resistant and stir in) is a pre-darken SO2 resistant high performance yellow shade moly orange pigment with stir-in properties and is recommended for high-end coating and plastic applications. This product is restricted to industrial and professional inks, coatings, plastics and roadmarking (subject to regional legislation).

DCL R2041 Rutile Titanium, PW.6 (Sulfate) is rutile titanium dioxide manufactured by the sulfate process. R2041 is surface-treated aluminum, silicon compounds, and organic matter for ease of dispersion and exterior durability. It is approved for food contact applications under 21 CFR 178.3297.

DCL 3223 Carbazole Violet, PV.23 is a high performance blue-shaded violet pigment for use in high-end coating applications where excellent fastness properties are required. This is a reliable and versatile choice for decorative, automotive, aerospace, industrial, and powder coating applications.

DCL 5020 Medium Yellow, PY.34 (Sulfur Dioxide resistant and stir in) is a pre-darken SO2 resistant high performance medium shade yellow pigment with stir-in properties and is recommended for high-end decorative, automotive, aerospace, industrial, and powder coatings along with plastic applications.

DCL 7322 Quinacridone Magenta, PR.122 has similar properties to DCC Red 7222, making it a suitable drop-in match for shade and strength to the market standard for universal coatings. It is a high-performance organic quinacridone red pigment with excellent fastness and durability properties, making it suitable for high-end coatings applications.

DCL 1184 Naphthol Red, PR.184 is a blue-shaded, semi-transparent naphthol red with good overall fastness properties. 1184 is an alternative to Pigment Red 57:1 types where an improvement in fastness properties is needed. It is a rubine process printing shade.

DCL 1252EE Diarylide Yellow, PY.152 is a bright red shade of yellow with exceptional hiding power, high tinting strength, and relatively low cost, providing superior value in use and lowering the costs of formulation. It has a similar shade to opaque pigment yellow 139, making it a low-cost alternative for interior applications. Furthermore, due to its high opacity and high chroma, it can be considered for lead-free formulations.

DCL 5051 Phthalocyanine Blue, PB.15:1 is an alpha crystal form of a red-shaded phthalocyanine blue that is rendered solvent stable. 5051 is FDA-approved (Section 178.3297), and is recommended for applications such as general industrial paints, various coatings, printing inks, plastics, rubber, floor coverings, and textile printing.

DCL 2188 Naphthol Red, PR.188 is a bright, yellow-shaded naphthol red with good flow properties, bleed resistance, lightfastness, and weather fastness. It is recommended for higher-grade exterior industrial paints, exterior trade sales coatings, colorant systems for in-plant tinting or machine colorants, printing inks, mass coloration of paper, paper surface coating, paper pulp coloration, wax crayons, and inks for wallpaper use. It is also recommended for use in plastics.

DCL 5RLX Bismuth Vanadate, PY.184 is a mid shade yellow pigment with high color strength and opacity. DCC Yellow 5RLX exhibits high saturation, high opacity, good resistance properties and is recommended for use in high-end industrial, automotive, aerospace, powder, and architectural paints.

DCL Orange GX Pyrazolone Orange, PO.13, is an orange pigment that provides a bright red shade of orange, commonly used in offset and aqueous inks. Additionally, DCL Orange GX is versatile enough to be used in a wide range of paint and plastic applications.

DCL 7222 Quinacridone Magenta, PR.122 is a highly versatile pigment suitable for use in coatings, inks, and plastic applications. This blue-shaded red pigment is FDA-approved and offers a clean, vibrant shade with excellent fastness properties. Widely used for shading other reds, creating special-effect metallic finishes, and formulating pinks, PR.122 is the basis for the magenta colorant worldwide and is employed in virtually all machine tinting systems, both architectural and industrial.

DCL KY895 Medium Yellow, PY.34 is a silica-encapsulated medium chrome yellow pigment with superior heat and chemical resistance for high-end industrial coating applications. This product is restricted to industrial and professional inks, coatings, plastics, and roadmarking applications (subject to regional legislation).

DCL 1073-A DPP Orange, PO.73 is a medium shade opaque orange pigment with very good light and chemical resistance. This pigment is mainly used in the following applications: Plastics such as PVC, PP, PS, PE and PET. Automotive/Aerospace, powder and industrial coatings. Solvent flexo inks Rubber products

DCL 4603 Proprietary, Hybrid is a mid- to high-performance medium-shade yellow pigment developed as an offset to PY.34. DCC Yellow 4603 is recommended to be used in higher end coating applications where excellent weather fastness and heat resistance are required.