Products in Building & Construction: Water Repellent

Loxanol® MI 6840 is a highly concentrated aqueous dispersion of paraffin wax designed to increase the hydrophobicity of water-based exterior coatings. It is effective in enhancing the hydrophobic properties of water-based exterior coatings and textured finishes.

SILRES® BS 1310 is a solvent-free, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It is an additive used in the production of aqueous masonry coatings and aqueous primers to enhance water repellency and resistance. Additionally, it improves the processability and antiblocking characteristics of the aqueous coatings.

SILRES® WH is a water-thinnable, solventless emulsion of a functional silicone resin. Dilute solutions of SILRES® WH are used as high-quality water repellents for impregnating wood surfaces. Undiluted SILRES® WH can also be used as a high-quality hydrophobizing additive for aqueous wood coatings and wood stains.

SILRES® BS 1001 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 1001 serve as high-quality, general-purpose water repellents for impregnating and priming mineral surfaces. SILRES® BS 1001 can be combined with polymer-based primers for substrate consolidation.

SILRES® BS 1306 is a solventless, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It can also be used as a water-repellent primer, in which case it should be diluted with water at a ratio of 1 part SILRES® BS 1306 to 9 parts water. If the primer is required to strengthen the substrate, we recommend adding a polymer dispersion in hydrosol form.

SILRES® BS 1360 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane. It can be added in undiluted form to aqueous masonry protection agents either during or after their production. Similar to SILRES® BS 1346, SILRES® BS 1360 is used undiluted as a hydrophobizing additive for aqueous masonry paints. Its primary functions are to enhance water repellency, water resistance, water vapor permeability, processability, and anti-blocking properties.

VISIOMER® Terra C13-MA (methacrylic ester 13.0) is a specialty monomer that offers enhanced water repellency and improved resistance against polar solvents. It is commonly employed to increase the hydrophobicity of resins, making them more resistant to water and other polar substances. This particular monomer is derived from raw materials obtained from natural oils, highlighting its environmentally friendly nature. VISIOMER® Terra C13-MA finds applications in various industries including adhesives and sealants, coatings, construction, oil and gas, paper, personal care, and healthcare.

SILRES® BS 1346 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane. It is used in its undiluted form as a hydrophobizing additive for aqueous masonry paints or plasters. Its purpose is to increase water repellency, water resistance, and water vapor permeability while also enhancing processability and antiblocking properties.

SILRES® BS 1340 is a nonionic, solvent-free, waterborne emulsion of a reactive polysiloxane. It is specifically used in the formulation of water-resistant coatings. SILRES® BS 1340 can be directly incorporated, without dilution, into waterborne masonry paints and plasters either during or after their production.

Gelest ISOBUTYLTRIMETHOXYSILANE (SII6453.7) is a branched structure that provides hydrophobic surface treatments for architectural coatings. This product functions as an adhesion promoter, coupling agent, and water repellent.

Gelest TETRAMETHOXYSILANE, 97% (SIT7510.0) has good mechanical properties and improves adhesion. It functions as a crosslinking agent, surface modifier, water repellent, and intermediate and is commonly used in chemical production.

Gelest TETRAMETHOXYSILANE, oligomeric hydrolysate (SIT7510.3) has good mechanical properties and improves adhesion. It functions as a crosslinking agent, surface modifier, water repellent, and intermediate and is commonly used in chemical production.

AFCONA 3522 is an additive to improve the surface characteristics of waterbased coatings. It is a waterbased emulsion of an organically modified polysiloxane, with the active ingredient being a hydrophobic polymer that gives water resistance and slip performance to the coating after drying. This product also offers low foam stabilization. AFCONA 3522 is recommended for use in all types of waterbased coatings.

AquaKlean 403 is an anionic paraffin/polyethylene wax emulsion ideal for cleanability and water repellency in architectural coatings.Features and Benefits Provides excellent initial water beading and long term water repellency. Imparts soil release for improved cleanability. Imparts slip, antiblocking, scratch and abrasion resistance. Wax emulsion particle does not reduce gloss or clarity. Anionic emulsion stabilization contributes to immediate hydrophobicity.

AquaBead® 270E is an anionic paraffin/polyethylene wax emulsion ideal for water repellency and weather/moisture resistance.Features and Benefits Provides excellent initial and long term water beading Imparts weather and moisture resistance Wax emulsion particle does not reduce gloss or clarity Anionic emulsiontabilization contributes to immediate hydrophobicity

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

Michem® Lube 182 - A wax emulsion provides slip, release, and anti-block properties in wood coatings and other applications and may be blended with synthetic and natural lattices. It also provides mar and scratch resistance and water repellency in varnishes and other coatings.

PEW-0678AF is suitable for solvent-based coatings and inks. Combined with PTFE, it greatly improves the smoothness, and scratch resistance of the polyethylene wax powder, resulting in a very good synergy. PEW-0678AF has very high hardness, uniform particle size and shape, very concentrated particle size range; very tidy molecular weight, has excellent abrasion resistance, and disperses easily.

SÜDRANOL® 250 is a waterbased wax-dispersion, which is used in waterbased paint- andvarnish-systems as well as in glazes. Properties and advantages are Improves antiblocking Improves scratch resistance Provides good surface slip Improves antimar No reduction of gloss High stability Very low particle size. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

LUBA-print® 942/P is a Wax dispersion / Wachsdispersion. It is used as waterbased paints and stains to improve slip, antiblocking and water resistance, brushing paints for paper and paperboard to improve hydrophobicity and antiblocking properties.

METOLAT N 50 is an aqueous dispersion of hydrophobic compounds which is easy to emulsify in water. METOLAT N 50 leads to an extension of the open-time of waterbased emulsion paints.

ADDAPT WaxMul WM 35 is a high melting point PE-wax emulsion giving very good wet scrub resistance of Paints and improves the buffability of Floor polishes. It is an emulsion of Polyethylene wax in water.

LW-102 is a high efficiency surface waterproofing agent which suitable for the water-based systems, it can significantly reduce the surface tension of the film. During the drying process, it can move to the surface of the coating, form a protective film and provide good water splashing effect. It is an ideal surface waterproofing agent for water-based varnish and water-based ink, which can make the coatings have lotus leaf effect to resistant water.

WÜKONIL® 5750 is specially developed for hydrophobicity of the cutting edges especially for OSB wood material boards and for fiber board. This product have very high dry content, low water insertion in the boards, free of halogens and aggressive components, good compatibility with cement, lime and gypsum, high hydrophobicity on the cutting edge. Application by spraying possible mixable with water in any ratio. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

HEXAFOR™ 6211 is a water-based (meth)acrylic fluorinated polymer based only on C6 fluorinated chains, that provides a durable and transparent surface trea™ent to a various kind of building materials as Natural Stones, Terra Cotta, Concrete and Bricks.

WÜKONIL® FC 960 is a wax additive specially developed for waterborne systems such as façade paints and plasters.WÜKONIL® FC 960 is a wax additive specially developed for waterborne systems such as facade paints and plasters. Properties and advantages are very good hydrophobic agent Reduction of water absorbency and cracks Improvement of anti blocking Good surface slip Improvement of recoatability and shade stability Reduced adhesion of plasters on working equipment (\"spatula\"). Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Humocer 100 A45 SP is a paraffinic emulsion of great stability, excellent dispersion in aqueous medium and water repellent. Product used as a water repellent additive, release agent and lubricant, in paints and in water-based internal and external coatings, in addition to masses based on acrylic resins and PVA.

WÜKONIL® HB 3000 is an efficient waterborne additive for unpigmented and pigmented wood coatings as well as for waterbased interior and exterior paints and pasty plasters.WÜKONIL® HB 3000 is an efficient waterborne additive for unpigmented and pigmented wood coatings as well as for waterbased interior and exterior paints and pasty plasters Properties and advantages in paints and plasters are improvement of hydrophbicity and early rain resistance Improvement of antiblocking Improved recoatability when painting \"wet in wet\" Properties and advantages in wood coatings are proves strongly hydrophbicity as well as early rain resistance Improvement of antiblocking. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

ADDAPT WaxMul WM 120 is a wax emulsion based on a balanced blend of Polyethylene and Paraffin waxes giving buffable films with excellent gloss and water repellent properties. It is an emulsion of Polyethylene and Paraffin waxes in water.