Products in Electrical & Electronics: Housings

MOCOM Compounds ALCOM® PC 740/1 PTFE10 is a polycarbonate-based material with 10% PTFE filler/additive system that provides improved sliding and wear. It is used in the automotive and machinery market segments for various applications, such as housings, functional components, bearings and sliding elements. For optimal processing, the pre-drying conditions for this material should be 120°C in a dry air (dessiccant) dryer for 2-3 hours, and in an air circulating dryer 100-120°C for 4-12 hours, depending on the moisture content, which should not exceed 0.02%. It is processed through injection molding with a melt temperature of 280-320°C and a mold temperature of 80-130°C.

MOCOM Compounds ALCOM® PC 740/1 SV1115-08MCF is a polycarbonate injection molding grade with a metallic effect and low tendency to flow lines. It is suitable for use in the automotive, building and construction markets. Pre-drying is recommended in a dry air (dessiccant) dryer at 100-120°C for 2-3 h depending on moisture content, with a maximum moisture content of 0.02%. For injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used. Additionally, it should be stored in the dark.

MOCOM Compounds ALTECH® ABS A 1000/739 AS is a base polymer acrylonitrile/butadiene/styrene/copolymer with special features of antistatic, easy release (demolding), and injection molding grade. It is suitable for market segments such as electrical and electronic and application areas such as domestic appliances and injection molded parts, and is commonly used for vacuum cleaners and their housings. To ensure its optimal performance, it should be protected from light and stored at temperatures not exceeding 30°C. For successful processing, injection molding requires a melt temperature of 200-240°C and a mold temperature of 50-80°C.

MOCOM Compounds ALCOM® LD2 PC 1000 18033 WT2816-18 is a polycarbonate base polymer that contains a release agent, special filler, and light scattering special features. It is used in lighting, automotive, and lighting-transparent components applications, such as housings, lamps, and operating elements. For injection molding, the recommended melt temperature is 270-310°C and mold temperature is 80-110°C. To ensure optimal results, it is essential to pre-dry the material in a dry air (dessiccant) dryer for 2-4 hours at 120°C and in an air circulating dryer for 4-12 hours at 120°C. The maximum moisture content should not exceed <0.02%.

MOCOM Compounds ALTECH® ECO PC 1000/141 is a polycarbonate base polymer that offers UV stabilization, easy release (demolding), flame retardant, and impact modified properties for injection molded parts in the electrical and electronic, lighting, and various markets. It is recommended to pre-dry the material before processing. For injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALTECH® ABS A 1000/670 is a Acrylonitrile/Butadiene/Styrene/Copolymer with good flow and processing stability. It is suitable for processing in injection molding with melt temperatures of 200-240°C and mold temperature of 50-80°C, and is suitable for applications in Medical/Personal Care, Packaging, Interior Decoration/Finishing, Hygiene products, and various injection molded parts. Pre-drying Conditions are 80°C in an air circulating dryer for 3-6 h, 80°C in a dry air (dessiccant) dryer for 2-4 h depending on moisture content with a maximum moisture content of <0.20%. To ensure the best results, it should be stored in a dry and light-protected environment at a temperature not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H B 4910/500 MR10 is a polypropylene homopolymer that is processed using injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C, containing 10% talcum and being processing stabilized and easy release (demolding). It is used in the market segments of packaging, furniture, building and construction, and is suitable for injection molded parts, interior decoration/finishing. Typical applications include racking/shelving, household goods, housings, and functional components. To ensure a good quality of the product, it should be stored in a cool, dark place, not exceeding 30°C.

MOCOM Compounds ALCOM® HM PP 1000 AG 14079 is a polypropylene homopolymer with a hygienic material filler/additive system and natural color. It has antibacterial features according to ISO 22196 and is suitable for applications in packaging, personal care, household goods, furniture, building and construction. Typical applications include sanitary articles, hygiene products, kitchenware, functional components, housings, handles, containers, and caps/closures.

MOCOM Compounds ALTECH® PP-B A 1000/120 UV is a polypropylene heterophasic copolymer with UV stabilized, heat stabilized, and processing stabilized properties. It is suitable for injection molding with a melt temperature of 200-240°C and a mold temperature of 20-70°C and is commonly used for automotive exterior parts and functional components, such as housings. Pre-drying is recommended in a dry air (dessiccant) dryer at 80-120°C for 2-3 h, or in an air circulating dryer at 80-120°C for 2-4 h.

MOCOM Compounds ALTECH® ECO PC 1000/542 FR UV is a polycarbonate base polymer with special features including UV stabilization, easy release (demolding), and flame retardant. It contains recycled material and is suitable for electrical and electronic applications, such as housings, plugs/connectors, and functional components.

MOCOM Compounds ALCOM® ASA/PC 540/5 UV GY81-714MCF is a UV stabilized polycarbonate + Acrylonitrile Styrene Acrylate Blend with a metallic color and low tendency to flow lines. It is typically used for housings and is suitable for electrical and electronic, building and construction, and sport and leisure market segments. Pre-drying Conditions for this material are in a dry air (dessiccant) dryer 90-110°C for 2-4 hours, in an air circulating dryer 90-110°C for 4-8 hours depending on moisture content. Processing Injection molding involves using a melt temperature of 260-300°C and a mold temperature of 60-90°C. It is important to note that the material should be dried prior to molding to ensure optimal performance.

MOCOM Compounds ALTECH® PP-B A 4915/500 MR15 is a polypropylene heterophasic copolymer with 15% talcum as a filler/additive system. It has high heat stabilization, processing stabilization, and easy release (demolding) characteristics. The melting temperature for injection molding is 200-250°C and the mold temperature is 20-70°C. This material is suitable for automotive, building and construction market segments with typical applications such as housings, fixing elements, functional components and interior decoration/finishing, gardening tools, clothing/fasteners and exterior parts. To ensure optimum performance, it should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® MS PP 4920 GY1233-20 is a polypropylene heterophasic copolymer with 20% talcum as a filler/additive system. It is heat stabilized, scratch resistant, UV stabilized, and impact modified, making it suitable for automotive applications such as housings and fasteners. For optimal results, it should be pre-dried before processing. Injection molding should be used to process it, with a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALCOM® ABS 530/29 UV SV1269-05MCS is a UV-stabilized acrylonitrile/butadiene/styrene/copolymer with good flow and a metallic color. It is used in building and construction and sport and leisure markets for domestic appliance housings. For injection molding, it should be melted at a temperature of 220-260°C and molded at a temperature of 50-80°C.

MOCOM Compounds ALTECH® ABS A 1000/170 is a copolymer of Acrylonitrile/Butadiene/Styrene with good flow and processing stability, suitable for injection molding at melt temperatures of 200-240°C and mold temperatures of 50-80°C. It is used in a variety of applications such as electrical and electronic, building and construction, Medical/Personal Care, ducting/piping systems, domestic appliances, valve components, housings, printer housings, paper dispensers, and operating elements.

MOCOM Compounds ALTECH® PS-HI A 1000/901 BK1261-20 is a polystyrene-based injection-molding grade with easy-release (demolding) and impact properties, making it suitable for use in the automotive, electrical and electronic, and building and construction markets for injection-molded parts such as bezels and housings. Pre-drying conditions involve a dry-air (dessiccant) dryer at 60-80°C for 2-3 hours, or an air-circulating dryer at 60-80°C for 2-3 hours. Processing injection-molding requires melt temperatures of 180-260°C and mold temperatures of 10-70°C. This material should be stored in a cool, dark place to protect it from light.

MOCOM Compounds TEDUR® L 9214-1 is a base polymer of polyphenylene sulfide with a filler/additive system of 45% glass fibers and 20% mineral. It is designed for highly stressed parts in the automotive and machinery market segments, and has special features of high stiffness. Pre-drying conditions include a dry air (dessiccant) dryer at 130-140°C for 2-4 hours depending on moisture content. Processing includes injection molding with a melt temperature of 320-340°C and a mold temperature greater than 140°C.

MOCOM Compounds ALTECH® PA6 A 1000/518 IM is a Polyamide 6 impact modified base polymer designed for easy release (demolding). Pre-drying should be done at 80°C in a dry air (dessiccant) dryer for 2-12 h depending on moisture content, with a maximum moisture content of 0.15%. It is suitable for automotive, machinery, and injection molded parts applications. The processing injection molding melt temperature should be between 250-270°C and the mold temperature should be between 40-80°C.

MOCOM Compounds ALTECH® PP-H A 2030/156 GF30 CP is a polypropylene homopolymer with 30% glass fibers and a filler/additive system that is chemically coupled, heat stabilized, easy release (demolding), and contains a slip agent. It is suitable for various market segments and typical applications such as housings and injection molded parts. For optimal processing, injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® ECO PA6 4230/100 GF10 MR20 is a heat-stabilized polyamide 6 blend with 10% glass fibers and 20% mineral. Pre-drying is recommended at 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of 0.15%. It is suitable for injection molding with a melt temperature of 270-290°C and a mold temperature of 80-100°C. It is typically used in the automotive market for engine covers and housings, and should be stored in a dry and light-protected environment not exceeding 30°C to ensure optimal properties.

MOCOM Compounds ALTECH® ABS A 1000/227 UV is a special UV-stabilized Acrylonitrile/Butadiene/Styrene/Copolymer base polymer that is suitable for injection molding with melt temperatures between 200-240°C and mold temperatures between 50-80°C. This polymer is ideal for applications such as housings, clothing/fasteners, and building and construction. It is essential to pre-dry the polymer under conditions of 80°C in a dry air (dessiccant) dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours, depending on moisture content, with a maximum moisture content of 0.20%. Furthermore, it should be stored in a dry environment that is protected from light and not above 30°C.

MOCOM Compounds ALCOM® MED PS 1000 14113 is a polystyrene with a minimum shelf life of 24 months and is suitable for injection molded parts such as housings. The melt temperature for injection molding should be 180-260°C, and the mold temperature should be 10-70°C.

MOCOM Compounds ALTECH® PP-B A 2030/150 GF30 CP is a heterophasic copolymer made of polypropylene and 30% glass fibers, coupled together chemically and easy to remove. It is heat and processing stable, and is suitable for injection molding with melt temperatures of 200-250°C and mold temperatures of 20-70°C. It is most commonly used for automotive purposes such as functional components, powertrain parts, housings, fixing elements, interior and exterior decoration and finishing. To ensure optimal results, it should be pre-dried in a dry air (dessiccant) dryer or air circulating dryer at temperatures of 80-120°C for 2-4 hours.

MOCOM Compounds ALCOM® CFX ASA 1000 UV 15116 SV1163-15MC is a pre-drying conditions acrylonitrile/styrene/acrylate/copolymer with UV stabilized metallic effect, which has low tendency to flow lines and is easy to flow. It is used in electrical and electronic, building and construction, and sport and leisure applications and is an injection molding grade. The melt temperature for processing injection molding is 240-280°C and the mold temperature is 40-80°C.

MOCOM Compounds ALTECH® PP-B A 1000/310 IM is a polypropylene heterophasic copolymer that has been specially modified with elastomer, impact, processing, and heat stabilizers. This material is ideal for automotive applications such as exterior parts, interior decoration/finishing, and transport systems, and is commonly used for housings, functional components, and fixing elements.

MOCOM Compounds ALCOM® PP 620/10 GY1464-04MCF is a polypropylene heterophasic copolymer with a gray, metallic color. It features flow line optimization, low tendency to produce flow lines, slip agent, and heat stabilization. This product is suitable for applications such as household items and housings, and can be processed using injection molding with a melt temperature of 200-270°C and mold temperature 20-70°C.

MOCOM Compounds ALTECH® PA6 B 2030/500 GF30 is a polyamide 6-based polymer with a 30% glass fiber filler/additive system. It is glycol, hot oil, and chemically resistant, has good flow, easy release properties, and is highly heat stabilized. This polymer is suitable for automotive, building and construction, and machinery applications, and can be used in the manufacturing of engine and drive systems, injection molded parts, clothing/fasteners, and exterior parts. Typical applications include different automotive powertrain parts, oil pans/sumps, and functional components, as well as housings.

MOCOM Compounds TEDUR® L 9510-5 is a pre-drying injection molding grade polymer with a base polymer of polyphenylene sulfide. It contains 40% glass fibers, offering high stiffness and easy flow, and is used in various market segments with typical applications such as pump components and housings. The pre-drying conditions involve a dry air (dessiccant) dryer at a temperature of 130-140°C for 2-4 hours depending on the moisture content. The injection molding process requires a melt temperature of 320-340°C and a mold temperature of more than 140°C. Finally, the product should be stored in a cool, dry place and protected from light, at temperatures not exceeding 30°C.

MOCOM Compounds ALTECH® PP-B A 4430/100 MR30 is a polypropylene heterophasic copolymer with 20% chalk and 10% talcum. It is heat stabilized and has easy release (demolding) and processing stabilized characteristics. For injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. This material is applicable in the building and construction, sport and leisure markets and is typically used for housings and functional components. It should be stored in a dry, light-protected environment, not above 30°C, for optimal results.

MOCOM Compounds TEDUR® L 9511-2 is a Polyphenylene Sulfide (PPS) base polymer filled with 45% glass fibers that offers high stiffness. It is typically used in the automotive, machinery, and injection molded parts markets for applications such as pump components, pump impellers, housings, and high pressure vessels. Pre-drying conditions for TEDUR® L 9511-2 involve drying in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours depending on the moisture content. Processing injection molding requires a melt temperature of 320-340°C and a mold temperature of less than 140°C.

MOCOM Compounds ALTECH® PP-H A 2030/156.01 GF30 CP is a Polypropylene Homopolymer suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C, containing a 30% glass fiber filler/additive system which is chemically coupled, heat stabilized, and contains a slip agent for easy release (demolding). This material is suitable for a variety of automotive and other market segments and can be used for applications such as housings and injection molded parts. To ensure optimal performance, it should be stored in a dry environment, away from light, and at a temperature not exceeding 30°C. It is also recommended to handle this material with care as it can be sensitive to pressure and heat.

MOCOM Compounds ALTECH® PP-B B 4430/500 MR30 is a polypropylene copolymer suitable for injection molding. It includes a 30% mineral filler/additive system, providing easy release (demolding) and processing stability. This product is suitable for automotive, building and construction applications, such as housing and automotive trim unpainted, buffer, and functional components. For optimal performance, it should be stored in a dry and light-protected area at temperatures not exceeding 30°C.

MOCOM Compounds ALTECH® PC A 1000/532 UV AS is a polycarbonate base polymer with antistatic and UV stabilized special features, used for injection molded parts in the electrical and electronic, building and construction, and sport and leisure market segments. Processing injection molding should be done at a melt temperature of 270-310°C and a mold temperature of 80-110°C. It should be stored dry and protected from light, not above 30°C.

MOCOM Compounds ALTECH® ABS A 1000/160 is a Acrylonitrile/Butadiene/Styrene/Copolymer with good flow and processing stability, making it suitable for a variety of applications such as Medical/Personal Care, Packaging, Interior Decoration/Finishing, Hygiene Products, and Injection molded Parts. The recommended pre-drying conditions are 80°C in an air circulating dryer for 3-6 hours and 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content with a maximum moisture content of <0.20%. The processing injection molding conditions are melt temperature 200-240°C and mold temperature 50-80°C.

MOCOM Compounds ALTECH® PS-HI A 1000/902 WT1223-20 is a polystyrene-based injection molding grade with easy release (demolding) properties and impact resistance, ideal for use in the automotive, electrical and electronic, and machinery markets. For processing, injection molding should be used with a melt temperature of 180-260°C and a mold temperature of 10-70°C. Typical applications include bezels, profiles, and housings. This product should be stored in a dry, light-protected environment.

MOCOM Compounds Altech® ECO PA66 1000/561 is a polyamide 66 base polymer with impact modification and the inclusion of recycled material, making it suitable for applications in the automotive, building and construction, and various other market segments. Typical applications include housing and automotive trim unpainted, fixing elements, cable ties, and various others. For usage, it should be kept dry, protected from light, and the temperature should not exceed 30°C. For processing injection molding, a melt temperature of 270-290°C is required, and a mold temperature of 40-80°C.