Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Electrical & Electronics
Devices & Assemblies
Automotive Electronics
Products in Automotive Electronics
1,133 Products found in Automotive Electronics
Filters
Suppliers
Product Families
Functions
End Uses
Chemical Family
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
SEMICOSIL® 9242
Product Type:
1K (1 component) Adhesive, Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:
Sensors, Power Control Unit (PCU), Electrical Components, Housing, Electronic Control Unit (ECU)
Cure Method:
Heat Cure, Chemical Cure
Chemical Family:
Silicones
SEMICOSIL® 9242 is a pourable, thermally curable, addition-curing one-part silicone rubber that cures to a very soft silicone gel. This product is ready-to-use, requiring no additional mixing. It exhibits thixotropic behavior, meaning it becomes shear-thinning during application. SEMICOSIL® 9242 offers rapid heat curing, allowing for efficient processing. Upon vulcanization, it forms a soft gel. With low levels of volatiles, uncured polymers, and ions, this silicone rubber ensures high purity. Additionally, SEMICOSIL® 9242 has the additional feature of ultraviolet fluorescence.
Wacker Chemie AG
SILRES® H62 C
Functions:
Resins, Binders & Matrix Materials
Chemical Family:
Silicones
Processing Methods:
Vacuum Pressure Impregnation (VPI)
SILRES® H62 C is a liquid, solvent-free, one-part heat-curing phenyl silicone resin formulation. The product is ideal for impregnating the electrical coils of motors and generators. Besides, SILRES® H62 C can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. The formulation is ready-to-use and crosslinks under heat. While curing, SILRES® H62 C does not release chemical byproducts, so curing shrinkage is barely noticeable. The product also thermosets in thick layers, even when in contact with air. Fully cured SILRES® H62 C has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.
Mitsubishi Chemical Group Corporation
METABLEN™ W 450A
Functions:
Impact Modifier
Compatible Polymers & Resins:
Thermoplastic Polyurethane (TPU), Polystyrenes (PS), Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA), Polylactic Acid (PLA)
METABLEN™ W 450A is an acrylic rubber-type impact modifier with good weatherability and impact strength. It is used for polyvinyl chloride (PVC) in window frames, pipes and gutters.FeaturesHigh level of elasticity Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ S 2001
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polylactic Acid (PLA), Recycled Plastics, Polybutylene Terephthalate (PBT), Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA)
Processing Methods:
Injection Molding
End Uses:
Battery Cases, Semiconductor Applications, Appliances
METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ S X-005
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polycarbonates (PC), Acrylonitrile Butadiene Styrene (ABS), Poly(Methyl Methacrylate) (PMMA), Polyolefins, Polylactic Acid (PLA), Polybutylene Terephthalate (PBT), Polyvinyl Chloride (PVC), Polypropylenes (PP), Polyamides, Polyesters, Polyethylenes (PE)
Processing Methods:
Injection Molding
End Uses:
Appliances, Battery Cases, Semiconductor Applications
METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ SX-006
Functions:
Impact Modifier
Compatible Polymers & Resins:
Acrylonitrile Styrene Acrylate (ASA), Styrene Acrylonitrile (SAN), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA), Polycarbonate -Styrene Acrylonitrile Alloy
Processing Methods:
Injection Molding
METABLEN™ SX-006 is a silicone-acrylic rubber-type impact modifier that provides impact strength and weatherability while maintaining melt-flow ability and scratch resistance of PMMA and SAN. It also gives vivid molded-in colors like piano black. The compounded resins can be widely used in automotive exterior applications (e.g. front grill, pillar, door mirror housing). Features High impact strength in all temperature zones High modulus and excellent heat aging resistance Excellent colorability *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ W 600A
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polylactic Acid (PLA), Polybutylene Terephthalate (PBT), Polystyrenes (PS), Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA)
Processing Methods:
Injection Molding
METABLEN™ W 600A is an acrylic rubber-type impact modifier with good weatherability and hydrolysis resistance. It is used for polylactic acid (PLA), polycarbonate/polybutylene terephthalate (PC/PBT) and polycarbonate/polyethylene terephthalate (PC/PBT) in 3D printer filaments and aerospace, consumer goods, and electric and electronic applications.FeaturesHigh level of hydrolysis resistance Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ S 2501
Chemical Family:
Silicon-based Compounds, Acrylics, Acrylates & Methacrylates
Functions:
Impact Modifier, Flame Retardant
Compatible Polymers & Resins:
Polyesters, Polylactic Acid (PLA), Polycarbonates (PC), Polyamides, Polyethylene Terephthalate (PET), Polybutylene Terephthalate (PBT), Poly(Methyl Methacrylate) (PMMA), Polyvinyl Chloride (PVC), Acrylonitrile Butadiene Styrene (ABS)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Consumer Applications, Automotive Exterior Parts, Aerospace Applications, Automotive Interior Parts, Electrical/Electronic Applications
METABLEN™ S 2501 is a is silicone-acrylic-rubber-type impact modifier that adds hydrolysis resistance, heat-aging resistance and impact strength to polycarbonate (PC), polylactic acid (PLA) and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistance*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ S 2260
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polylactic Acid (PLA), Polycarbonates (PC), Acrylonitrile Styrene Acrylate (ASA), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA)
Processing Methods:
Injection Molding
End Uses:
Aerospace Applications, Consumer Applications, Automotive Applications, Appliances
METABLEN™ S 2260 is a silicone-acrylic-based rubber core shell-type impact modifier that provides super high impact strength and weatherability to acrylonitrile butadiene styrene (ABS), acrylonitrile styrene acrylate (ASA) and poly methyl methacrylate (PMMA) through extrusion and moldings. It is used for esthetic exterior car components such as front grills, and housings for electronics.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ S 2030
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polylactic Acid (PLA), Polybutylene Terephthalate (PBT), Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA)
Processing Methods:
Injection Molding
End Uses:
Aerospace Applications, Consumer Applications, Electrical/Electronic Applications, Automotive Applications
METABLEN™ S 2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ SRK-200A
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA), Polylactic Acid (PLA)
Processing Methods:
Injection Molding
METABLEN™ SRK-200A is a silicone-acrylic-based rubber impact modifier with heat-aging resistance and impact strength. It is used for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) and polycarbonate/polybutylene terephthalate (PC/PBT) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceWeather stabilityHeat resistanceHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ C 223A
Chemical Family:
Butadienes
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polystyrenes (PS), Polyesters, Polylactic Acid (PLA), Polycarbonates (PC), Polyamides, Polypropylenes (PP), High-Impact Polystyrene (HIPS), Polyvinyl Chloride (PVC), Acrylonitrile Butadiene Styrene (ABS), Thermoplastic Polyolefins (TPO)
Processing Methods:
Extrusion, Injection Molding
End Uses:
Appliances, Construction Applications, Consumer Applications, Aerospace Applications, Automotive Electronics, Automotive Applications
METABLEN™ C 223A is a butadiene-based rubber and graft copolymer. It is used as an impact modifier for ABS, polyamides, PC, PLA, and other matrix resins in automotive and transportation, electrical and electronics, and consumer goods applications.FeaturesImpact resistanceSuper high impact strength in all temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ S 2130
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polylactic Acid (PLA), Polycarbonates (PC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA)
Processing Methods:
Injection Molding
End Uses:
Battery Cases, Semiconductor Applications
METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ S 2100
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polylactic Acid (PLA), Polybutylene Terephthalate (PBT), Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA)
Processing Methods:
Injection Molding
End Uses:
Battery Cases, Semiconductor Applications, Appliances
METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
Mitsubishi Chemical Group Corporation
METABLEN™ S 2200
Functions:
Impact Modifier
Compatible Polymers & Resins:
Polylactic Acid (PLA), Polybutylene Terephthalate (PBT), Polycarbonates (PC), Polyvinyl Chloride (PVC), Polyamides, Acrylonitrile Butadiene Styrene (ABS), Polyesters, Poly(Methyl Methacrylate) (PMMA)
Processing Methods:
Injection Molding
End Uses:
Battery Cases, Semiconductor Applications, Appliances
METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group
SABIC's Specialties Business
ULTEM™ Resin 3452
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber, Mineral
Additives Included:
Flame Retardant
SABIC's Specialties Business 45% Glass fiber and mineral filled, enhanced flow Polyetherimide (Tg 217C) with enhanced dimensional stability. ECO Conforming, UL94 V0 and 5VA listing in recognized colors. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin 2200R
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Flame Retardant, Mold Release Agent
SABIC's Specialties Business ULTEM™ Resin 2200R is a 20% Glass fiber filled, standard flow Polyetherimide (Tg 217°C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin AUT200AR
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Additives Included:
Mold Release Agent
Flexural Modulus:
3300.0 - 3300.0 MPa
SABIC's Specialties Business High flow Polyetherimide (Tg 217°C) with low level of transparent mold release. Very low outgassing and plateout for optimally reduced need for mold cleaning. May be beneficial for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 204°C (SABIC IP method).
SABIC's Specialties Business
NORYL GTX™ Resin GTX4610
Polymer Name:
PPO/Nylon Alloy
Processing Methods:
Injection Molding
Density:
1210.0 - 1210.0 kg/m³
Flexural Modulus:
4600.0 - 4600.0 MPa
SABIC's Specialties Business NORYL GTX4610 resin is a 10% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This high performance injection moldable grade has a UL 5VA flame rating, non-brominated / non-chlorinated FR package, UL746C Outdoor Suitability rating of F1, excellent chemical resistance, high heat resistance, and flow. NORYL GTX4610 resin is an excellent candidate for a wide variety of electrical applications including connectors, sockets, sensors, terminal blocks, and insulator components. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
CYCOLOY™ FR Resin CX7240
Polymer Name:
PC/ABS Alloy
Processing Methods:
Injection Molding
Density:
1200.0 - 1200.0 kg/m³
Flexural Modulus:
2500.0 - 2500.0 MPa
SABIC's Specialties Business CYCOLOY CX7240 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is an injection moldable, medium flow, non chlorinated/brominated flame retardant grade. It has a UL94 V0@.75mm, 5VA@3.0mm and 5VB@1.5mm flame rating. This grade has improved chemical resistance compared to standard PC/ABS blends and is a good candidate for thin wall applications.
SABIC's Specialties Business
ULTEM™ Resin 2200
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Flame Retardant
SABIC's Specialties Business ULTEM™ Resin 2200 is a 20% Glass fiber filled, standard flow Polyetherimide (Tg 217°C) . ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification in recognized colors.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin 2300R
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
3D Printing, Compression Molding, Large Format Additive Manufacturing (LFAM), Extrusion, Injection Molding, Profile Extrusion, Sheet Extrusion
Fillers Included:
Glass Fiber
Additives Included:
Mold Release Agent, Flame Retardant
Flexural Modulus:
9600.0 - 9600.0 MPa
SABIC's Specialties Business ULTEM™ Resin 2300R is a standard flow 30% glass fiber reinforced polyetherimide resin with an added internal mold release. The material is RoHS compliant and is intrinsically flame retardant without the use of FR modifiers and offers UL94 V0 and 5VA ratings. The material may offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C. The material is opaque and can be custom colored.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin 2310
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Digital Light Processing, 3D Printing
Fillers Included:
Glass Fiber
Additives Included:
Flame Retardant
Flexural Modulus:
9600.0 - 9600.0 MPa
SABIC's Specialties Business ULTEM™ Resin 2310 is an improved flow 30% glass fiber reinforced polyetherimide resin. The material is RoHS compliant and is intrinsically flame retardant without the use of FR modifiers and offers UL94 V0 and 5VA ratings and FAR25.853 performance. The material may offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C. The material is opaque and can be custom colored.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
NORYL GTX™ Resin GTX934
Polymer Name:
PPO/Nylon Alloy
Processing Methods:
Injection Molding
Density:
1090.0 - 1090.0 kg/m³
Flexural Modulus:
2200.0 - 2200.0 MPa
SABIC's Specialties Business NORYL GTX934 resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits improved processability and excellent heat aging performance. NORYL GTX934 resin was designed for high heat automotive under-the-hood applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin 1010
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Extrusion Blow Molding (EBM), 3D Printing, Compression Molding, Foam Extrusion, Extrusion, Injection Molding, Profile Extrusion, Film Extrusion, Compounding, Injection Compression Molding
Additives Included:
Flame Retardant
Flexural Modulus:
3300.0 - 3300.0 MPa
SABIC's Specialties Business ULTEM™ Resin 1010 is an unreinforced amorphous polyetherimide (PEI) resin that offers a high glass transition temperature (Tg) of 217°C and improved flow. Its features include excellent mechanical, electrical, and dimensional properties up to high temperatures. The material also offers very good chemical resistance for an amorphous material and is inherently flame retardant, offering UL94 V0 and 5V ratings as well as aerospace FAR 25.853 compliance. ULTEM™ Resin 1010 is RoHS compliant, and the natural, uncolored material is halogen-free according to standards IEC 61249-2-21, IPC 4101E, and JEDEC JS709B. Compliance for colored variants needs to be checked on a case-by-case basis. The base material is transparent amber-colored but is also available in custom colors, both transparent and opaque. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
LNP™ THERMOCOMP™ Compound RC004SXC
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Fillers Included:
Carbon Fiber
Additives Included:
Heat Stabilizer
Flexural Modulus:
10500.0 - 10500.0 MPa
SABIC's Specialties Business LNP THERMOCOMP RC004SXC compound is based on Nylon 6/6 resin containing 20% carbon fiber. Added features of this grade include: Electrically Conductive, Heat Stabilized. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin AUT200
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Additives Included:
Flame Retardant, Heat Stabilizer
Flexural Modulus:
3300.0 - 3300.0 MPa
SABIC's Specialties Business Transparent high flow Polyetherimide (Tg 217C). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 204C (SABIC IP method) This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin 2220
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Thin Wall Injection Molding, Compression Molding, Extrusion, Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Flame Retardant
Flexural Modulus:
7000.0 - 7000.0 MPa
SABIC's Specialties Business ULTEM™ Resin 2220 is a high-flow resin with a 20% glass fiber reinforcement made from polyetherimide. This material is RoHS compliant and inherently flame retardant, without the need for any flame retardant additives, and offers a UL94 V0 rating at over 0.5 mm. It provides excellent dimensional stability, strength, stiffness, and creep resistance at high temperatures due to its high glass transition temperature of 217°C. This opaque material can be custom colored, and SABIC offers renewable bio-based solutions certified by ISCC+ for this grade, which can be identified by differentiated color nomenclature.
SABIC's Specialties Business
NORYL GTX™ Resin GTX830
Polymer Name:
PPO/Nylon Alloy
Processing Methods:
Injection Molding
Density:
1328.0 - 1328.0 kg/m³
SABIC's Specialties Business NORYL GTX830 resin is a 30% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness (flexural modulus 8200 MPa), excellent chemical resistance, and high heat resistance. NORYL GTX830 resin is an excellent candidate for a wide variety of applications including automotive under the bonnet applications and water meter housings. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin 2110
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Flame Retardant
SABIC's Specialties Business ULTEM™ Resin 2110 is a 10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217°C) . ECO Conforming, UL94 V0 and 5VA listing.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
NORYL GTX™ Resin GTX820
Polymer Name:
PPO/Nylon Alloy
Processing Methods:
Injection Molding
Density:
1240.0 - 1240.0 kg/m³
Flexural Modulus:
5960.0 - 5960.0 MPa
SABIC's Specialties Business NORYL GTX820 resin is a 20% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness (flexural modulus 4000 MPa), excellent chemical resistance, and high heat resistance. NORYL GTX820 resin is an excellent candidate for a wide variety of applications including valves for water management. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
NORYL GTX™ Resin GTX8408
Polymer Name:
PPO/Nylon Alloy
Processing Methods:
Injection Molding
Density:
1150.0 - 1150.0 kg/m³
Flexural Modulus:
3520.0 - 3520.0 MPa
SABIC's Specialties Business NORYL GTX8408 resin is an 8% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade exhibits high elongation, excellent chemical resistance, high heat resistance, and flow. NORYL GTX8408 resin is an excellent candidate for a wide variety of structural and electrical connector applications. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin AUT230
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Additives Included:
Flame Retardant
Flexural Modulus:
3080.0 - 3080.0 MPa
SABIC's Specialties Business Transparent polyetherimide (Tg 247C). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 230C (SABIC Innovative Plastics method) This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
ULTEM™ Resin AUT210
Polymer Name:
Thermoplastic Polyimide (TPI), Polyimide (PI)
Processing Methods:
Injection Molding
Additives Included:
Flame Retardant
Flexural Modulus:
3140.0 - 3140.0 MPa
SABIC's Specialties Business Transparent, Thermoplastic Polyimide (TPI). Glass transition Temperature (Tg) of 227degC. Haze onset temperature of 212degC (SABIC IP method). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required.
SABIC's Specialties Business
ULTEM™ Resin 2410R
Polymer Name:
Polyether Imide (PEI)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Flame Retardant, Mold Release Agent
SABIC's Specialties Business 40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
SABIC's Specialties Business
LNP™ THERMOTUF™ Compound WF006NiQ
Polymer Name:
Polybutylene Terephthalate (PBT)
Additives Included:
Impact Modifier
Fillers Included:
Glass Fiber
Labeling Claims:
No Added PFAS, Sustainable, Contains PCR Resin, Recycled
Processing Methods:
Injection Molding
Density:
1490.0 - 1490.0 kg/m³
SABIC's Specialties Business LNP™ THERMOTUF™ Compound WF006NiQ is a high-quality material based on polybutylene terephthalate (PBT) resin that utilizes ELCRIN iQ upcycling technology and contains 30% glass fiber. This grade is impact modified, has high flow, good metal bonding strength, and good chemical resistance, making it suitable for nano-molding technology (NMT) applications. It also contains more than 25% post-consumer recycled content, making it an eco-friendly choice for manufacturers. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.
Show
36
of 1,133 results
Go to page
1
2
3
4
5
6
7
8
9
10