Products in Building & Construction: Resins, Binders & Matrix Materi...

DISTITRON® 414 RV2,5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through mix with fillers and/or additives,casting.

DISTITRON® 518 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Rhino Linings USA, Inc. 1307LV Resin is a Epoxy Resin for Kit Aircraft. Kit Aircraft Laminating and Adhesive System. System has excellent wet out, low viscosity and high strength.

EPOLAM 2022 is a Variable reactivity by addition of an accelerator Tg ~80°C

Distitron® 3519A1V5 - preaccelerated, UV stabilized. Main applications areas are furniture, home and domestic applications etc.

Fiberglass (A/Asia) Sales Pty 342S VE Resin is a general purpose type resin used in the manufacture of fiberglass reinforced plastic components, and other applications where it is resistant to a broad range of acid base and salt solutions up to 100 Deg. C. 342S Vinyl Ester Resin is normally supplied thixotropic and promoted to be catalyzed by either Interox SR or Butanox M50 catalysts. Other MEKP catalysts should be first tested before used for the development of a satisfactory level of cure. Where exposure to severe corrosive environments is to be encountered, post curing of laminates is strongly recommended.

Fiberglass (A/Asia) Sales Pty 2719 Clear Casting Resin is a medium viscosity, low reactivity, and pre-promoted unsaturated polyester resin. It has a long gel time and a low exotherm and cures to a water white color with excellent clarity. This longer gel time and lower exotherm makes it suitable for larger castings.

DISTITRON® 3519 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

KPR 6420 by Kemrock Industries and Exports is a general purpose, orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6420 is suitable for processing by pultrusion. Recommended for FRP composites.

DISTITRON® 1402 AN2V3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding method.

Stypol® RSP10021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Norsodyne® PT-207 - terephthalic resin for pultrusion. Main applications areas are building and construction, industrial sector etc.

EPOLAM 2020 is a Variable reactivity by addition of an accelerator Tg ~80°C

DISTITRON® 110 SXZ - Unsaturated polyester resin in styrene,DCPD. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

AOC's Vipel F010 series is a bisphenol A epoxy-based vinyl ester resin dissolved in styrene. The Vipel F010 series is ideally suited for use in hand lay-up, spray-up, filament winding, SMC, and pultrusion processes where outstanding mechanical properties and excellent resistance to chemicals and heat are required.BENEFITSVersatileWide formulating capabilities allow for use in many processes and for optimization of cost/performance.Unique composition produces a tough and versatile resin with excellent crack and craze resistance in molded parts.Vipel F010 is suitable for moldings that are subjected to particularly high static or dynamic loads, such as pipe, tanks, duct work and flooring applications. Vinyl ester resins have excellent resistance to sustained heat.Corrosion ResistanceVipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to AOC's "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particular chemical environment contact AOC.

EPOVIA OPTIMUM® KRF 2000 SE - Brominated Epoxy Resin based vinyl ester in styrene. It is used as general purpose in filament winding,vacuum injection,hand lay up and spray up,pultrusion method.

NORSODYNE® H 13239 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through hand lay up and spray up,filament winding method.

Stypol® 040-8123 - pre-promoted unsaturated polyester laminating resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 161 T100Z - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce buttons through casting (rods) method.

G-Etronax® PM 953 is the composite material that does it all. G-Etronax® PM 953 as an all-in-one material. This is because the carefully composed resins combined with the glass base result not only in exceptional resistance but also amazing electrotechnical properties, making G-Etronax® PM 953 suitable for countless applications.

Polynt Group 787-2599 - toughened vinyl ester resin offering improved fracture toughness and crack resistance; unthixed, unpromoted. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

NORSODYNE® C 16237 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce abrasives,chips through casting method.

Norsodyne® H-305HV has general purpose, good chemical resistance. It is generally used in coatings applicatons.

Epovia Optimum® BC 4200 PA - vinylester barrier coat for spray application. Main applications areas are building and construction, composites, industrial sector, marine etc.

DISTITRON® 454 AV7 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

NORSODYNE® S 81302 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating,hand lay up and spray up method.

BRE 816 is used as Liner resin and for a high flexibility.

NORSODYNE® O 12335 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce inclusion through casting method.

Lerpol 653 is a orthophtalic resin for casting. Based on the deep experience and know how acquired in many years of dedication to tailor made solutions.

Rhino Linings USA, Inc. 1301 Resin is a Standard Undiluted Epoxy Resin. The standard press mold epoxy system for composite laminates and parts. All listed hardeners cure very quickly at standard process temperatures 160°F – 210°F.

LFT-G® PP-NA-LGF40 is a PP (Polypropylene) Resin with Long glass fiber type with 40% fiber Content in Natural color, and and custom colors.

ARMORSTAR 30/45 (E) - Thixotropic,preaccelerated,with LSE system

Fiberglass (A/Asia) Sales Pty 268 BQTN Laminating Resin is a thixatropic, quick-curing unsaturated polyester resin of orthophthalic grade for general laminating purposes. It is pre-accelerated, and suitable for both hand lay-up and gun spray-up. It is available in Australia either as 268 BQTN LSE waxed, or 268BQTN unwaxed. This resin is used for making a variety of glass fiber reinforced plastic products such as boats and canoes, bus shelters, telephone booths, stadium seating, bath tubs, water and storage tanks, cooling towers, plant and flowers pots, bath units, models, containers, dust bins, safety helmets, water and oil pipes, ash trays, septic tanks, car body parts, sporting equipment, concrete framings, chairs and tables, and other household as well as industrial articles. Glass reinforced laminates made with this resin possess excellent mechanical strength along with good rigidity and outstanding durability. The SHCP 268BQT resin and its variants are approved by Lloyd’s Register of Shipping for boat construction.

Eager Polymers EP4101 Castolite AC is a room temperature cured, air-inhibited, rigid, water-clear casting resin. The liquid color is pale turquoise to clear, however when properly cured, EP4101 is crystal clear with excellent sparkle. EP4101 is widely used to make clear paperweights, jewelry, crystal balls, or to encapsulate dried biological or botanical specimens. When used with fiberglass fabric, vandal resistant windows or resin-stained glass can be made. Eager Plastics' extensive line of transparent dyes are available for a wide variety of effects.

Lerpol RS 61 Alogen free filled resin, very versatile and easy to be processed in HLU/SLU and closed mold techniques. Laminates made with this resin in combination with Lavecoat FT have succesfully met class HL3 HL3 in R1 and R7 according to EN 45545.

Rhino Linings USA, Inc. 1337 Resin is a High Temperature Epoxy Novolac Tooling Resin. High temperature Novolac laminating and tooling epoxy. 350°F HDT after post cure.