Products in Building & Construction: Carbonates

Kandelium barium carbonate play a significant part in a wide range of applications. They are important raw materials for products as varied as magnets, glasses, displays, bricks and tiles, ceramics and electronic components. Additionally, they occupy a key role in both water treatment and the production of metals, chlorides, nitrates, oxides, and more.

ASCOM 25 limestone powder is the highest whiteness and high purity with low iron, silica and magnesium levels. Limestone is derived from enormous reserves.

Jordan Mineral Est JM63N is a natural ground calcium carbonate powder with excellent dispersion produced from microcrystalline rhombohedral high purity white limestone.

Hubercarb® M200 is a medium fine ground calcium carbonate produced from a uniform, high calcium limestone deposit in Marble Falls, Texas. The M200 particle distribution offers a wide range of applications from carpet backing to cleansers, joint compounds to PVC flooring, concrete to oilfield drilling fluids where its low acid insoluble content is useful

Jordan Mineral Est JM250N is a natural ground calcium carbonate powder produced from microcrystalline rhombohedral high purity white limestone.

Calcite RF 240# is the most common form of natural calcium carbonate. Calcium carbonate minerals are the most important and abundant of all sedimentary rocks. It occurs in crystalline form in white color. It is many times associated with varying proportion of Magnesium Carbonate.

Hubercarb® M300 is an medium-fine ground calcium carbonate produced from a uniform, high calcium limestone deposit in Marble Falls, Texas. Carefully controlled particle distribution allows M300 to be used a wide range of applications including paints, coatings, adhesives, caulks, and concrete building products. Acid solubility above 92% and location make M300 ideal for use in oilfield drilling fluids.

Aktisil VM 56 is a sillitin Z 86 coated with vinyl silane.

Pulpro PP-20 is a near white calcium carbonate designed for use as a resin filler in pultrusion, caulks, adhesives and sealants and/or in fiberglass spray up manufacturing. R.J. Marshall offers 4 distinct sizes. Pulpro3, a three micron calcium carbonate. Pulpro8, an eight micron calcium carbonate. Pulpro10, a ten micron calcium carbonate and Pulpro20, a twenty micron calcium carbonate product.

MICA-SOFT® 15/12 W is a wet-ground silky pure mica fine powder.

Nordkalk ENRICH C is an ultrafine precipitated calcium carbonate (PCC) product created to replace titanium dioxide and binder in paints and coatings. The multi-functional product innovation of Nordkalk Enrich has increasingly generated greater attention across the market, creating value in various fields of application in paints & coatings, adhesives, paper, inks and building materials.

Cel-Span® CFA 800 is an endothermic foaming agent concentrate recommended for injection molding & extrusion applications for a variety of thermoplastic resins such as polyethylene, polypropylene, styrenics, MPPO and ABS. Cel-Span® CFA 800 is recommended for extrusion, and structural foam molding of polyolefins, polystyrene, MPPO and ABS. This product exhibits a very fine cell structure compared to a typical endothermic foaming agent in extrusion applications. This product has been engineered to eliminate splay and to exhibit good surface esthetics for solid injection foam parts.

Microblanc 3 is a very fine, extremely white and of high purity, crystalline Calcium Carbonate. The greatest advantage of Microblanc 3 is the re enforcement of the hiding power of paints, this is due to its unique particle size distribution.

Micronized Products SnowTalc is a magnesium silicate mineral with a monoclinic crystal structure. It is characterized by its softness and platy or lamellar physical structure. When ground into a fine powder, this lamellar property gives a smooth, soapy feel.

Hubercarb® M6 is a fine ground calcium carbonate produced from a uniform, high calcium limestone deposit in Marble Falls, Texas. Carefully controlled particle distribution allows M6 to be used a wide range of applications including paints, coatings, adhesives, caulks, and oilfield drilling fluids.

Ulmer Weiss XM is a fine calcium carbonate powder with a yellow index of 7.6 that is designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, and polishing mixtures. Ulmer Weiss XM is a solid powder in appearance with a characteristic odor.

Ulmer Weiss 4-6 is a fine calcium carbonate granulate designed for use as a filler, pigment, mixing agent, or raw material in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, dyes, pigments, and polishing mixtures. Ulmer Weiss 4-6 is similar to sand or gravel in appearance with a characteristic odor and grain size of 4.0-6.0. This product does not flash and is non flammable.

A unique ground calcium carbonate from a specialty, high purity calcium carbonate and processed at Huber™s largest GCC plant in Quincy, Illinois. Applications for Optifil include coatings, inks, PVC pipe, rubber, plastics, and oilfield drilling fluids where its 99%+ calcium carbonate content yields almost complete acid solubility.

HisarCal® St-2 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

Zetafil CST CA is described on a very white, pure crystalline CaCO3. It is coated by an organic agent which transforms the surface of the inorganic particles to an organic one, thus achieving full compatibility of the filler to an organic media. Due to its special particle size distribution, Zetafil CST CA is easily dispersed (especially in compounds for cables). Zetafil CST CA’s brightness value enables formulators to economize in Titanium Dioxide by reducing its percentages in the end product.

HisarCal® Ex-99 is used in the paper sector. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

Juraperle 120 is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paper, paperboard, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 120 is a solid powder in appearance with a characteristic odor and a loose bulk density of 1.4 g/cm3

Jordan Mineral Est JM2SFN is a natural superfine ground calcium carbonate powder with excellent dispersion produced from microcrystalline rhombohedral high purity white limestone.

European Plastic Joint Stock Company PE Filler Masterbatch is the Polyethylene based masterbatch containing fine pure Calcium Carbonate CaCO3 powder, polyethylene PE as the carrier and other appropriate additives.

AnTec BH-50 is a high-performance aluminum silicate product, dedicated to flat exterior wall coatings. It is a white powder with a special flake structure and uniform particle size distribution.

Saudi Carbonate SCC PCC 40C - YB Specially coated is the most suitable grade for uPVC Profile and Pressure Pipes Applications. A tetra functional compound coated SCC PCC 40C - YB has an advantage in ease of manufacturing & molecule building thus providing better adhesion properties in polymer matrix. The dispersion characteristics are better and surface gloss of the end product is improved beside good weathering resistance.

HisarCal® St-5 is used in the paper industry. Micronized calcite is used in the production of writing paper, wall paper, and cardboard by adding 15-30% cellulose. Because of its high whiteness, low cost, and other technical properties that it provides to paper, it has entered the paper sector and replaced kaolin in the last ten years all over the world, beginning in Europe.

Juraperle 2-3 is a fine calcium carbonate granulate designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 2-3 has an appearance similar to sand or gravel, a characteristic odor, and a grain size of 2.0-3.0.

GEMATILEN® BK70 HD is 70% Calcium carbonate filled PE. It is an off-the-shelf compound filler masterbatch. It is from 50% to 80% Calcium Carbonate (Chalk, CaCO3) filled LLDPE based compound. The product has been engineered specifically for FILM and bag manufacture. It can be blended with LDPE, HDPE, MDPE and LLDPE at up to 50% or 40% depending on the application.

Shiraishi Kogyo Kaisha Brilliant-1500 advances in polymer chemistry have spurred a revolution in rubber and plastic production that has left its mark in every field of industry, as well as in our daily lives.Our originally developed calcium carbonates add strength, durability and rigidity to tires and conveyor belts; increase the heat and weather resistance of electric cables, pipes, films and home appliances; and stimulate product diversification with their simpler processing and forming.

Hubercarb® Q3 is a fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. Carefully controlled particle distribution allows Q3 to be used in a wide range of applications including paints, coatings, adhesives, caulks, and plastics.

Hubercarb® Q200 is a medium fine ground calcium carbonate produced at Huber’s Quincy, Illinois plant which is known for its natural uniformity producing consistent purity and brightness. The Q200 particle distribution offers a wide range of applications from carpet backing to cleansers, joint compounds to PVC flooring, concrete to oilfield drilling fluids where its low acid insoluble content is useful.

Geotex® 40-200 is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. The controlled particle distribution allows G40-200 to be used as a texturizing agent, in plaster, EIFS, in abrasives, PVC flooring, and oilfield drilling fluids where its low acid insoluble content is useful.

Reinste 259 is Used as a functional filler for onec omp o n e n t o r two - c omp o n e n t polyurethane adhesive and sealant.

Geotex® 10-20 is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. In applications needing high brightness material such as plaster and stuccos, Geotex has outstanding performance. The marble crystal structure is useful in recirculation drilling fluids.

Zetatalc EW 10 is made of pure lamellar talc. The crystals are macro crystalline in shape and processed in such a way so as to always retain this shape. This filler has an extremely high degree of whiteness and chemical purity. Zetatalc EW 10 renders these unique properties it possesses wherever it is applied