Products in Decorative Materials & Finishes: Waterborne Adhesive

Foamaster® MO 2150 is an excellent defoamer for mid to high PVC decorative coatings, offering exceptional product stability and retaining antifoaming properties during paint storage. It is based on mineral oil and is a blend of foam-destroying substances.

Foamaster® NO 2306 is a mineral-oil-free defoamer for aqueous paints and adhesives. It exhibits outstanding defoaming properties when used in emulsion paints, latex-based masonry finishes, and adhesives based on acrylics, styrene acrylics, vinyl acetate ethylene copolymers, and alkyd emulsions. Its chemical nature is based on alkyl poly(alkoxy esters) and fatty esters, making it an environmentally friendly alternative.

VINNAPAS® EP 706K (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, offering improved adhesion to films such as polyvinyl chloride. Additionally, VINNAPAS® EP 706K (NJG) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® EP 706K (ULS) is a high-viscosity vinyl acetate-ethylene copolymer dispersion with low formaldehyde and low free VAM residue. It exhibits good machinability and strong wet tack, providing improved adhesion to films like polyvinyl chloride. Additionally, VINNAPAS® EP 706K (ULS) demonstrates very high plasticizer and solvent viscosity thickening responses.

VINNAPAS® EP 708 (NJG) is a high-viscosity vinyl acetate-ethylene copolymer dispersion. It demonstrates excellent machinability and strong wet tack. Additionally, it offers enhanced adhesion to films, including polyvinyl chloride. VINNAPAS® EP 708 (NJG) is chemically stable at both high and low pH. It has very high plasticizer and solvent viscosity thickening responses. It is compatible with an assortment of resins, solvents, plasticizers, and other modifiers, as well as the other VINNAPAS® EP dispersions.

VINNAPAS® EP 708 (ULS) is a high-viscosity vinyl acetate-ethylene copolymer dispersion that offers good machinability and strong wet tack. It provides better adhesion to films, including polyvinyl chloride, and exhibits good adhesion to various plastic surfaces. The adhesive joints formed with this product are permanently flexible and have high cohesion.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

POLYRON® N NEW is a white, hygroscopic agglomerate dispersing agent that is ideal for emulsion paints, plasters, and adhesives. Its high dispersing effectiveness quickly achieves optimal particle size. It reduces water hardness, deflocculates pigments and fillers in aqueous suspensions, and can help achieve high solid contents in emulsion paints with low viscosity.

POLYRON® 322 is a white powder dispersing agent designed for use in emulsion paints, plasters, and adhesives. When applied in combination with polyacrylates such as LOPON® DA 200, POLYRON® 322 improves the storage stability of the product. Its dispersing action also ensures an optimal particle size is rapidly achieved, enhancing the final product's quality.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

POLYRON® 322 NEW is a white, hygroscopic agglomerate dispersing agent designed for use in emulsion paints, plasters, and adhesives. Its dispersing action ensures that an optimal particle size is rapidly achieved, making it best suited as a dispersing agent for waterborne paints, especially emulsion paints. POLYRON® 322 NEW slows down sedimentation, reduces water hardness, and has a good binding capacity with respect to calcium and heavy metal ions.

POLYRON® N is a white powder dispersing agent for emulsion paints, plasters, and adhesives. Its high dispersing effectivity quickly achieves an optimal particle size. It is ideal for use as a dispersing agent for emulsion paints and plasters, and it reduces water hardness and deflocculates pigments and fillers in aqueous suspensions. It can achieve high solid contents in emulsion paints with low viscosity.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Texicryl® 13-319 is a hydrophobically modified alkali swellable emulsion designed for use as a rheology modifier in waterbased formulations. It is highly effective in modifying viscosities at low shear rates to avoid both settling and sagging. It has been designed for use in the formulation of textured coatings, woodstains, paints and waterborne coating systems.

Texipol 63-201 is an inverse emulsion thickener that imparts a stringy and mildly pseudoplastic rheology to aqueous based compositions. It is supplied as a pre-neutralized dispersion, as the sodium salt of an acrylic copolymer. It is a high efficiency thickener used for carpet backing compounds with long flow character.

Texicryl® 17-0330 is a styrene acrylic copolymer emulsion designed for use in high performance adhesives, inks, and coatings where flexibility and/or cold temperature flexibility are desired. It can be utilized in a range of water based adhesives and emulsion paint formulations and can easily be formulated into coatings varying in properties from semi-gloss finish to high pigment volume concentration low-cost paints.

PhosGard® 140 is a liquid chemical compound known as Tris(2-butoxyethyl) phosphate, falling under the phosphates family. With low viscosity and flame retardant properties, it functions as a versatile additive. Primarily used as a plasticizer and leveling agent in waterborne adhesives and decorative paints, PhosGard® 140 is available in drums and totes (IBC) packaging.

Vinavil 4711 is a water-based styrene/acrylic copolymer emulsion that produces a transparent, flexible, and non-tacky film upon drying.

Non-Silicone, Water-Based Anti-Foaming Agent for Paints and CoatingsBorchers® AF T is a non-silicone anti-foaming agent based on tri-n-butyl phosphate for use in a wide range of solvent- and water-based pigment pastes and highly loaded systems.

Saitack® 307 is a high solids acrylic copolymer emulsion with a formulating base for construction adhesives, flooring/ carpet adhesives, and sealants.

Rovene 4176 is a medium soft, carboxylated styrene-butadiene emulsion that can be used with a variety of fillers and additives to customize the desired application properties. The dry film exhibits excellent toughness and water resistance. Rovene 4176 has found application use in carpet and cove based adhesives, as well as industrial coatings, flat architectural coatings and low moisture vapor transmission primers.

AGITAN 218 is a defoamer for all common emulsion systems.

TAFIGEL PUR 48 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 48 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 48 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

CLiQFLOW® 660 is an organotin-free polyurethane thickener for aqueous decorative and industrial systems. The associative thickener increases both low and midshear viscosity and provides a shear thinning flow behavior.

GlucoStar® 1748 is a cold-water soluble, high viscosity polymer for use in industrial applications. GlucoStar 1748 is a modified, high molecular weight, natural polysaccharide designed to impart enhanced functional properties including: viscosity, rheology modification, solution stability, salt tolerance, surface activity and water retention. The ultra-high viscosity and high solubility of GlucoStar 1748 make it particularly suited for use as a viscosifier and binder in adhesive formulations. In addition, it has excellent tack and film clarity. GlucoStar 1748 is particularly suited for use in wall-covering, outdoor advertising and paper bag adhesives. GlucoStar 1748 is treated with a preservative for the prevention of bacterial or fungicidal breakdown.

TAFIGEL AP 15 is a synthetic thickener designed for universal use in low to high PVC systems. In comparison to common HASE thickeners it shows a stronger associative thickening character.

TAFIGEL PUR 65 is an associative thickener which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 65 provides strong pseudoplastic rheological profile with excellent shear thinning characteristics. It can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. TAFIGEL PUR 65 is designed for use in industrial coatings. It is also recommended for following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and putties.

TAFIGEL PUR 60 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 60 provides strong pseudoplastic rheological profile with excellent shear thinning characteristics. It can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. TAFIGEL PUR 60 is designed for use in industrial coatings. It is also recommended for following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

TAFIGEL PUR 85 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 85 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 85 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 85 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks.

Fibrillated cellulose in water suspension. Valida S191C, 3% is derived from wood pulp that has been sourced from sustainable managed forests. The product is a multifunctional bio-based additive which can be widely used in waterborne coatings, Inks, adhesives to provide unique rheological and physical properties.

ONLY AVAILABLE OUTSIDE EUROPEAN UNION! TAFIGEL PUR 40 is designed as an "associative thickener" which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and pigment particles. TAFIGEL PUR 40 can be used alone or in combination with other TAFIGEL thickeners as well as with further thickener technologies. TAFIGEL PUR 40 is recommended for use in following systems: Interior and exterior paints, latex paints, anti-corrosive paints, emulsion plasters, adhesives and joint fillers.

TAFIGEL AP 20 is recommended as thickener for anionic and non-ionic systems. Polymeric thickener for aqueous systems,Construction adhesives Paints Silicate facade paints.

GlucoStar® 1030N is a cold-water soluble, high viscosity polymer for use in industrial applications. GlucoStar 1030N is a modified, high molecular weight, natural polysaccharide designed to impart enhanced functional properties including: viscosity, rheology modification, solution stability, salt tolerance, surface activity and water retention. The ultra-high viscosity and high solubility of GlucoStar 1030N make it particularly suited for use as a viscosifier and binder in adhesive formulations. In addition, it has excellent tack, film clarity and slip properties. GlucoStar 1030N is particularly suited for use in wall-covering, outdoor advertising and paper bag adhesives. GlucoStar 1030N is not treated with a preservative.

Deuteron SR 28 is soluble in water and forms firm gels when used in small quantities. The extremely high thixotropy avoids a breakdown of the solution even in small quantities.Deuteron SR 28 requires no heat for mixing. It can be stirred into cold water or a liquid agent. Using a higher shearing force would lead to a shorter mixing time and a maximum exploitation of the product respectively. A higher shearing force speeds up the dissolving process and leads to a faster final viscosity and thixotropy.Application All aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. back

CLiQSMART 1032 is apolyglycol emulsion based defoamer for aqueous systems. The silicone and mineral oil free defoamer shows high efficiency and excellent system compatibility. The product is typically applied in low-to-highgloss pigmented aqueous industrial or decorative coatings, adhesives and inks.