Products in Transportation: Surface Finish

Crystic® Brush Gelcoat 69PA is a pre-accelerated Iso-NPG gelcoat formulated for brush application. It has been developed to have exceptional water and chemical resistance and is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd'™s Register of Shipping.

Crystic® Low Styrene Spray Gelcoat LS 96PA is an isophthalic gelcoat. It is filled, pre-accelerated and formulated for spray application. The viscosity profile ensures even coverage with minimal drainage and low film porosity. It is recommended for use in building and transport industries and is also suitable for general molding requirements.

Crystic® Fireguard Gelcoat 72PA is a new technology spray fire retardant gelcoat which is halogen free. It has a number of fire approvals with different Crystic resin systems. This product has low surface spread of flame compared to competitive standard technology fire retardant gelcoats.

Crystic® Polyester Resin R115PA is a general purpose thixotropic, pre-accelerated, orthophthalic, unsaturated polyester resin. It has a 10-minute gel time and is suitable for use in buidling and construction, transportation and industrial applications by hand lay up or by spray application for the production of most glass reinforced laminates.

Crystic® Transfer Moulding Resin 5008ST is a non accelerated orthophtalic resin designed for use by RTM (Resin Transfer Molding) techniques, with excellent mechanical properties. Its rheology makes it suitable to be processed by vacuum injection or wet press as well.

Crestafire® P1-3001E is a filled, fire retardant unsaturated polyester resin. It incorporates a special grade of alumina trihydrate (ATH), which makes it suitable to produce laminates where excellent resin flow, fire retardancy, and low levels of smoke and toxic fumes are required. Crestafire® P1-3001E is extra stabilized for transport, storage, and use in high-temperature climates. It is halogen free and does not contain heavy metals.

Crestafire® GCS 1001E is a non-accelerated, low-smoke, fire retardant intumescent polyester-based gel coat designed to be applied by spray in a thin layer of 500μm. It incorporates new intumescent technology. When exposed to fire, Crestafire® GCS 1001 E forms a foamed cellular charred layer, offering a high degree of protection to the surface of the composite. It is restricted to a standard light grey color and is designed to be post-painted.

Crestafire® P1-3001PA is a filled, pre-accelerated, fire retardant unsaturated polyester resin. It incorporates a selected grade of alumina trihydrate (ATH) which makes it suitable to produce laminates where excellent resin flow, fire retardancy, and low levels of smoke and toxic fumes are required. It is halogen-free and does not contain heavy metals.

Zero Styrene Crystic® Ecogel S0PA is a zero styrene spray gelcoat for industrial applications such as the wind energy sector. This product is acetone free and can be used with Butanox® M-50. Key features include: High elongation Zero Styrene Content Excellent weathering performance Easy to apply Low VOC emission

Crystic® Laminating Resin 471PALV is a pre-accelerated, low-viscosity polyester resin with rapid hardening characteristics. This laminating resin combines rapid impregnation of reinforcements and fillers with a very short mold release time and is suitable for hand-laying or spray applications. It has an 8-minute gel time, Lloyds approval, and is suitable for use in marine, transportation, building and construction, and industrial applications.

Low Styrene Crystic® Ecogel S4PA is a lower cost option, suitable for industrial applications (not Marine) where users are looking for an industrial option with low styrene content (23% styrene content). It is a high performance isophthalic gelcoat. This gelcoat is pre-accelerated and formulated for spray application.

Crystic® FR1166 PAK is a filled, orthophtalic, pre accelerated, low styrene content and thixotropic unsaturated polyester resin. It has to be used when excellent low smoke and fire resistant laminates are required. Crystic PD1166 PAK is halogen free and does not contain heavy metals.

Crystic® Polyester Resin 702PAX is a pre-accelerated orthophthalic polyester resin with low viscosity and controlled exotherm characteristics. It is designed for use in vacuum infusion processes. This product has Lloyd's approval and is suitable for use in marine, wind energy, building and construction, and transportation.

Crestafire® P1-2002PA is a pre-accelerated thixotropic polyester resin with fire retardant properties, making it suitable for applications where fire resistance is a consideration. The product is suitable for spray and hand lamination application techniques. It requires only the addition of a catalyst to start the curing reaction.

Crestafire® P1-3002PA is a pre-accelerated polyester resin with fire retardant properties, which make it suitable for applications where fire resistance is a major consideration. It is suitable for RTM (resin transfer molding) and RTM light applications. It requires only the addition of a catalyst to start the curing reaction.

Crystic® Brush Mouldguard (B) is a flexible pre-accelerated thixotropic coating material for mold protection. It has been formulated for brush application and is available in a restricted range of colors. It has been specifically developed for the protection from composite molds when put into storage or for transportation. The cured coating has been designed to give easy stripping from stored moulds prior to re-use.

Crystic® Polyester Resin 196E is a non-accelerated, non-thixotropic, orthophthalic polyester resin for use in hot climates. It has Lloyd's approval and can be used in marine, transportation, building and construction, and industrial applications. This product is particularly suitable for filament winding and pultrusion processes.

Crystic® Isophthalic Brush Gelcoat LS 88PA is an isophthalic gelcoat. It is pre-accelerated and formulated for brush application and is recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

Crystic® Polyester Resin 703PA is a pre-accelerated dicyclopentadiene (DCPD)-based polyester resin primarily designed for vacuum injection. With its low viscosity and controlled exotherm characteristics, it is particularly suited for large vacuum injections, although other techniques can be used. This resin is approved by Lloyd’s Register of Shipping and has excellent impact resistance, especially due to its compatibility with most reinforcement types. Because of this, it is suitable for a number of heavy-duty applications within the marine, building and construction, and transportation industries. The curing reaction requires only the addition of a catalyst to begin and should be carried out at workshop temperature. The resin, mold, and workshop should all be allowed to reach at least 15°C before the process is carried out. This resin is not ideally suited for the addition of fillers or pigments, and you should get in touch with one of our technical experts before using any additives.

Crystic® Polyester Resin 491 is a thixotropic, isophthalic polyester resin with good water and chemical resistance properties. It was developed for use in a wide range of critical applications that require toughness combined with water and chemical resistance. It is a versatile resin suitable for the fabrication of high-performance boat hulls intended for use in warm or tropical areas.

Crystic® Fireguard Gelcoat 72PAX is a new technology, spray fire retardant topcoat which is halogen free. It has low surface spread of flame compared to competitive standard technology fire retardant topcoats. This pre-accelerated filled spray topcoat can be used both internally and externally for building, transport and general industrial work.

Crystic® Very-Low Styrene Ecogel S3PA is a high performance isophthalic neopentyl glycol gelcoat. This gelcoat is pre-accelerated and formulated for spray application. Crystic Ecogel® S3PA is a low VOC product. Crystic Ecogel® S3PA has been specially designed for the production of high quality parts in the marine industry. This formulation offers an excellent hydrolysis resistance combined with a high gloss and gloss retention. Crystic Ecogel® S3PA has approval by the Lloyd’s Register of Shipping.

Crystic® Polyester Resin 489PA is a pre-accelerated, thixotropic, isophthalic polyester resin. When used with Crystic® Marine Grade Gelcoats such as LS 88PA, LS 97PA, LS 30PA, LS 31PA, and Permabright, it gives outstanding durability and superior blister resistance for molding boat hulls. This product is suitable for use with continuous rovings, carbon fibers, and aramids. It has a 23-minute gel time, Lloyd's approval, and is suitable for marine, transportation, building and construction, and industrial applications.

Crystic® Polyester Resin 2.446PA is a pre-accelerated, thixotropic, spray viscosity, orthophthalic polyester resin with low styrene emission. This laminating resin's rapid wet-out, low exotherm, and fast hardening characteristics make it ideal for rapid mold turnaround. It has a 26-minute gel time, Lloyd's approval, and can be used in marine, transportation, building and construction, and industrial applications. A low-viscosity version of this product is also available.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Fire Retardant Resin U1007TPA is a filled, fire-retardant, pre-accelerated, thixotropic unsaturated polyester resin designed for RTM and RTM light. It cures with standard MEKP peroxide and has a 17-minute gel time. This product will achieve M2 to the French fire standard.

Crystic® Sandable Brush Gelcoat 42PA is an orthophthalic sandable gelcoat, filled, pre accelerated and formulated for brush application. It has been specially designed for applications that are to be post-painted. This gelcoat is available in a limited range of colors.

Crystic® Polyester Resin 199 is an isophthalic polyester resin recommended for use in high-performance applications where superior thermal and electrical properties are required. It has excellent chemical and heat resistance. This product can withstand long periods (1 year) at temperatures up to 150ºC, and shorter periods at temperatures up to 200ºC, with no serious loss of properties. It has a 30-minute gel time.

Crystic® Polyester Resin 2.406PA is a pre-accelerated, thixotropic, orthophthalic polyester resin with low styrene emission. This laminating resin has rapid wet out and low exotherm, making it ideal for multi-layer laminates in spray or hand-lay applications. It has a 16-minute gel time, Lloyd's approval, and can be used in marine, transportation, building and construction, and industrial applications.

Crestafire® GCS 1005PA is a pre-accelerated, low-smoke, fire-retardant, polyester-based intumescent gelcoat designed to be applied by spray in a thin layer of 500μm. It incorporates new intumescent technology. When exposed to fire, Crestafire® GCS 1005PA forms a foamed, cellular charred layer, offering a high degree of protection to the surface of the composite. It is restricted to a standard white color, designed to be post-painted, and formulated to EN45545-2 standard to meet HL3.

Crystic® Vinylester Resin VE671 is an epoxy Bisphenol A based standard vinyl ester resin. It has outstanding chemical resistance to a wide range of substances, (acids, alkalies, oxidising agents) at room and elevated temperatures. The product is suitable for fabrication of fiber reinforced composites by all conventional techniques (contact molding, filament winding and injection molding) and for use in many chemical processing industry applications (storage tanks, vessels, ducts).

Crystic® Isophthalic Spray Gelcoat GT-900 is a high performance isophthalic gelcoat, filled, pre-accelerated and formulated for spray application. It has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity. This product is recommended for use in the marine, building and transport industries. It is also suitable for general molding requirements.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Fire Retardant Resin 5046PA is a filled, orthophthalic, pre-accelerated, unsaturated polyester resin suitable for fire retardant applications. It is designed for manufacturing composite parts using hand layup or injection processes. This product is ideal for demanding applications in buildings, public transport, and railways. It has excellent fire resistance and a Q rating of 0.53, achieving M1/F2 standards as a fully cured laminate with Gelcoat 967 PA FR. This product has a low viscosity, which lowers consumption and enhances suitability for RTM processes. The low styrene content also provides better comfort for users, and the stability provides low filler sedimentation. Pigments and additional fillers can be added to this resin. However, their effects should be tested in workshop conditions before being added to the formulation.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.