Products in Lubricants & Functional Fluids: Industrial Lubricants

PETROSOL D 20/26 is a fraction of hydrogenated kerosene, with an initial and final distillation range typically between 200°C and 260°C. Notably, it exhibits very low aromatic content and has a faint odor. Its low aromatic content and nearly imperceptible scent make it a versatile choice for various applications, including use in paints, varnishes, fuel, solvents, lubricants, multipurpose oils, drilling fluids, insecticides, home air fresheners, and as an efficient degreaser.

LUBIMAX® PIB 1000 SA is a member of the LUBIMAX® PIB series of polyisobutenes. LUBIMAX® PIB 1000 SA is colorless, chemically inert, nondrying and highly resistant to oxidation and photodegradation. This range of products is non-toxic and will not leave residue post volatilization or thermal decomposition.

LUBRICIT PE 418 is an oleic acid based polyol ester. It is environmentally friendly with high bioderived content and offers outstanding lubricity and low volatility. The polyol core structure provides good hydrolytic and thermal stability, making it an excellent choice for hydraulic fluids, gear oils, and metalworking applications.

LEXOLUBE CLG-460 is a complex polyol ester that provides robust solutions for high temperature applications. It is carefully manufactured to provide little or no residual carboxylic acid. This leads to better emulsion stability, and bio-resistance when properly formulated. LEXOLUBE CG-3000 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570. With greater than 70% renewable content and high biodegradability, the product in on the LuSC list, making it a great choice for any EAL formula, such as those required by the Vessel General Permit (VGP) or EcoLabel.

LEXOLUBE KL-435 is a complex polyol ester that provides robust solutions for high temperature applications. It is carefully manufactured to provide little or no residual carboxylic acid. This leads to better emulsion stability, and bio-resistance when properly formulated.

LUBRICIT TMP C810 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is useful in applications where good oxidative stability, low temperature fluidity, and high bioderived content are required. The product has achieved the HX-1 designation by NSF International, qualifying it as a lubricant basestock for incidental food contact.

LEXOLUBE CPE-70 is a complex polyol ester that provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation.

LUBRICIT PE iC18 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is useful in applications where good oxidative stability, low temperature fluidity, and high bioderived content are required.

NEWPOL 50HB-660 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

LEXOLUBE PQ-68 is a pentaerythritol ester that provides lubricity, detergency, low temperature fluidity and additive compatibility in a wide range of applications. It is optimal in terms of oxidation, and is useful as a base oil and an additive for most applications requiring high temperature stability such as 2 and 4 stroke oils, compressor oils, hydraulic fluids, greases and gear oils.

LUBRICIT TMP C18-VEG is an oleic acid based polyol ester on the LuSC list. It is environmentally friendly and offers outstanding lubricity and low volatility. In addition, the polyol core structure provides good hydrolytic and thermal stability, making it an excellent choice for hydraulic fluids, gear oils, and metalworking applications meeting EU EcoLabel requirements. It is NSF listed as HX-1, and can be used in applications where incidental food contact is possible. The VEG version utilizes select vegetable derived oleic fatty acids.

LUBRICIT TMP C9 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability. The product has achieved the HX-1 designation by NSF International, qualifying it as a lubricant basestock for incidental food contact.

LUBRICIT PE 510/1 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability.

LEXOLUBE GT-855IG HX1 fluid is a 100% biobased synthetic triester base fluid for food processing industry applications. It achieves the NSF international HX-1 listing for incidental food contact under the requirements of FDA 21 CFR 178.3570. Food Plants that use exclusively H1 lubricants do not need to report under the HACCP hazard requirement.

LEXOLUBE CG-3000 is an environmentally friendly, high viscosity synthetic complex ester especially suited as a thickener and co-base stock with vegetable oils. It allows great flexibility to blend high performance vegetable based lubricants to ISO VG 320 and above. LEXOLUBE CG-3000 provides excellent boundary protection, and can be used as an antiwear/extreme pressure additive to eliminate or reduce chlorine, sulfur and/or phosphorus additives in lubricant formulations. With greater than 50% renewable content and high biodegradability, the product in on the LuSC list, making it a great choice for any EAL formula, such as those required by the Vessel General Permit (VGP) or EcoLabel. LEXOLUBE CG-3000 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570.

LUBRICIT DOS is an sebacate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Sebacate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DIOA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties, such as compressors and grease. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT PGDO is an oleic acid based diester with high viscosity index and high bioderived content. It is environmentally friendly and offers outstanding lubricity and low volatility. In addition, the structure provides good hydrolytic and thermal stability, making it a good choice for hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT NGDO is an oleic acid based polyol diester with high viscosity index and high bioderived content. It is environmentally friendly and offers outstanding lubricity and low volatility. In addition, the polyol core structure provides good hydrolytic and thermal stability, making it a good choice for hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT 9538/1 is a complex dimer ester. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation. LEXOLUBE 9538/1 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570.

LUBRICIT DOA is an adipate diester fluid that is used as a synthetic base oil for formulations requireing outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT GTL is a fully saturated glycerol triester derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. 100% bioderived content, high biodegradability and low aquatic toxicity make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT 2-EHO is a long chain fatty acid ester that provides excellent metal adhesion and a low friction tribofilm. It may be used as a base fluid or friction modifier for a broad range of metalworking applications.

LUBRICIT 9538 is a complex dimer ester. It provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation.

LEXOLUBE HS-S is a patented, hydrolytically stable ester that is well suited for use in water-based metalworking fluids as a base stock or additive component.

LUBRICIT 9515 is a polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range and good oxidative stability.

LUBRICIT GMO is a glycerol monooleate derived from natural fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. This LuSC listed product has 100% bioderived content, high biodegradability and low aquatic toxicity which make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.

LEXOLUBE 3I-310 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is optimal in terms of oxidation, and is useful as a base oil and additive for most applications requiring high temperature stability such as compressor/gear oils, hydraulic fluids, grease formulations, as well as 2 and 4 stroke oils.

LUBRICIT 2-EHL is a medium chain fatty acid ester that provides excellent metal adhesion and a low friction tribofilm. It may be used as a lubricity additive or friction modifier for a broad range of metalworking applications.

LUBRICIT 2-EHS is a saturated long chain fatty acid ester that provides excellent metal adhesion and a low friction tribofilm. It may be used as a lubricity additive or friction modifier for a broad range of metalworking applications.

LEXOLUBE IPO is a long chain fatty acid monoester listed by NSF as HX-1 for incidental food contact. Isopropyl esters are partially branched structures that resist hydrolysis and are well suited for use in water-based metalworking fluids.

LUBRICIT 9505 is a dimerate fluid that is used as a synthetic base oil for formulations requiring good low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DINA is an adipate diester fluid that is used as a synthetic base oil for formulations requiring exceptional low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT DTDA/1 is an adipate diester fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Adipate diesters are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT 2-EHD is a dimerate fluid that is used as a synthetic base oil for formulations requiring outstanding low temperature flow properties. Dimer esters offer high bioderived content are often added to Group III and IV based lubricants to improve additive solubility, reduce varnish, and extend fluid life.

LUBRICIT GMO-VEG is a glycerol monooleate derived from vegetable fatty acids. It is environmentally friendly and offers outstanding lubricity and low volatility. This LuSC listed product has 100% bioderived content, high biodegradability and low aquatic toxicity which make it an excellent choice for EcoLabel hydraulic fluids, gear oils, and metalworking applications.