Products in Automotive & Transportation: Glass Beads & Fibers

COMFIL offer fabrics of the produced thermoplastic composite yarns.

Aerotex 5 oz glass Tape is available in 25, 50, 75 and 100 mm width and sells per 100 m roll.

HexForce™ 1311 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Style 146 is 5.40 oz. per square yard (183 g/m2) plain weave fiberglass fabric.

ORCA CS MAT 1 OZ. X 10” ROLL. Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

Style 1080 is 1.43 oz.per square yard (48.5 g/sm) plain weave fiberglass fabric.

4oz (124gsm) Plain Weave Glass Fabric is designed for surfboard manufacture with a sizing (fiber finish) that provides easy wet out, high clarity and softness for superior fabric handling.

HexForce™ 7587 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

ORCA CS MAT 3 OZ. X 18” ROLL (LBS.). Orca Chopped Strand Mats consist of chopped glass fibers bonded together using a polyester powder. The mats are designed to be compatible with unsaturated ortho polyester, iso polyester, vinyl este and a variety of other resins.

SKAPS W 2400 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

C-TAPE™ U300P 12K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 310 gsm. It is made using 12K HS carbon fiber. The binding provided by the weft, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

From classical man-made fibers to man-made fibers on cellulose base to high performance fibers. Glass fillament yarn 220 dtex can be used custom-designed for BAFA®-laid scrims.

SKAPS L 1800 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

TG-11-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

Staple Fiber CD 11.5 1430 AT is a staple fiber, high tex yarns have a higher surface area that is ideal as a filtration medium for gas, dust and aerosols. Vetrotex manufactures a wide range of staple fibers ranging from 7 µm to 25 µm, perfect for use as filtration medium for mist elimination process.

Muehlmeier Filament fabric finished TGG25 is a woven webs of continuous E-glass yarns with a finish that makes the fibers even more supple and is designed for epoxy resin systems. The glass yarns are spun yarns with no or slight twist. They have excellent impregnating properties and drapeability. Suitable for contact or continuous processes.

HexForce™ 7626 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

E-LT 2900 is a E-Glass fiber type.

Saint-Gobain Vetrotex America EC6 6 mm T30M is a Vetrotex textile chopped strands are made from continuous E-Glass filaments treated with a starch/oil-based textile size which are then chopped to a given length from 3mm up to 24mm. Textile chopped strands are manufactured to strict internal process and product specifications. Only E-Glass with textile sizing is used in the production of these filaments.The chopped strands are free of contamination or any other foreign material.

HexForce™ 1188 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

This is a continuous filament reinforcing mat designed for flat-sheet epoxy laminate production. It has been treated with a suitable bonding resin and coupling agent and has good handling properties and weight uniformity

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

E-Fiberglass Warp Triaxial can be used in a variety of applications in the automotive, aerospace, construction, corrosive, industrial and marine industries. NCF is a composite reinforcing fabric in which fibers are organized into layers of plies of variable weight and orientation. The layers are stitched together. The result is a range of engineered fabrics with predictable, repeatable properties for the composite industry. Triaxial Longitudinal (Warp Triaxial) Non-Crimp Fabrics are ideal for applications that require a combination of high longitudinal and shear strength and stiffness, and some transverse strength. Ideal for laterally loaded panels with aspect ratio from 1 .5 to ∞. This triaxial product is suitable for hand lay-up, vacuum bagging of relatively flat components (minimum curvature radius approximately 15mm), vacuum injection and other RTM-processes.

ENC200/250 is a fabric woven from alkali-free glass fiber roving through different weaving processes such as plain weaving and twill weaving. The weight is 200~1100g/㎡, and the width is 400~3200mm. Products are widely used in the manufacture of surfboards, hulls, containers, car bodies, windsurfing boards, pipes and other composite products.

HexForce™ 1610 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

SKAPS DB 1800 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

SAERTEX composite reinforcements made of glass, carbon and aramid fibers. Those materials are also known as NCFs (non-crimp fabrics). We deliver non-crimp fabrics with more than 3,000 article designs. Depending on the fiber type, surface weight and angle combination, various mechanical characteristics can be achieved. SAERTEX multiaxials are individually configured for our customers and optimally adapted to a range of processes. Suitable methods are vacuum infusion, RTM, pultrusion, prepreg, compression, etc.

Saint-Gobain Vetrotex America EC9 12 mm is a Vetrotex textile chopped strands are made from continuous E-Glass filaments treated with a starch/oil-based textile size which are then chopped to a given length from 3mm up to 24mm. Textile chopped strands are manufactured to strict internal process and product specifications. Only E-Glass with textile sizing is used in the production of these filaments.The chopped strands are free of contamination or any other foreign material.

SKAPS FM 250 is a fiberglass of type E-glass. It is compatible with Polyester, Vinyl Ester and Epoxy resins

3B Fiberglass M8610 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane cou-pling agent and the layers held together with a suitable binder.The CFM products contain an insolublebinder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl ester, epoxy and polyurethane resin systems. The M8610 mat is ideally suited for injection molding, RTM and S-RIM processes for molding complex parts. The M8615mat version, with its high rigidity, helps to work with large CFM cuts without loosing _x005F_x001f_bres. The excellent mechanical properties provided by CFM combined with the good electrical properties of the resins make the molded parts attractive for applications like electrical apparatus (high voltage), transportation & automo-tive industries and infrastructuresequipments.

HexForce™ 220 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

E-Fiberglass Welf Triaxial can be used in a variety of applications in the automotive, aerospace, construction, corrosive, industrial and marine industries. NCF is a composite reinforcing fabric in which fibers are organized into layers of plies of variable weight and orientation. The layers are stitched together. The result is a range of engineered fabrics with predictable, repeatable properties for the composite industry. Triaxial Transverse (Weft Triaxial) Non-Crimp Fabrics are ideal for applications that require a combination of high transverse and shear strength and stiffness, and some longitudinal strength. The combination of straight, non-woven fibers and high glass volume fractions give superior properties at lower weight. This triaxial product is suitable for hand lay-up, vacuum bagging of relatively flat components (minimum curvature radius approximately 15mm), vacuum injection and other RTM-processes.

3B Fiberglass DS 2200-13P is a 13 μm filament dia-meter, 4 mm long chopped glass fiber designed for production of Polyolefin compounds.DS 2200-13P shows outstanding compatibility with Polypropylene. This is the material of choice for very high glass content (up to 50 %wt) compound grades that require good fiber dispersion as well as mechanical properties. DS 2200-13P is also desig-ned for parts weathering in prolonged contact with water, detergents and glycol. DS 2200-13P can also be used in applications complying with strin-gent requirements of food contact and drinkable water standards EC 10/2011, FDA, BfR and ACS. DS 2200-13P is supplied on a pel-letized form and offers outstanding feeding-to-extruder behavior as well as excellent fiber impregnation.DS 2200-13P’s sizing chemistry also requires reduced amount of coupling agents so that parts reach optimum mechanical performances.

HexForce™ 7629 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Taishan Fiberglass EWR600, woven roving is made on looms by weaving direct roving into fabrics, it gives bi-directional (O° /90° ) reinforcement and is compatible with UP, VE & EP resins.