Products in Automotive: Epoxy & Epoxy Derivatives

8329TCS is a 2-part, heat-cure, thermally conductive epoxy adhesive with a 4-hour working time. It is a dark gray, smooth, thixotropic paste that cures to form a hard, durable polymer that is thermally conductive, yet electrically insulating. This thermal adhesive is used to glue heat sinks to LEDs, CPUs and other heat-generating components. 8329TCS has been designed for maximum thermal conductivity. It is highly viscous and must be mixed by hand prior to application. For a lower viscosity, use 8329TFS. For a shorter working time, use 8329TCM.

8329TCF is a thermally conductive, fast-cure two-part epoxy adhesive. It is off-white, smooth, viscous, thixotropic, and bonds well to a wide variety of substrates. It is also flame retardant and meets the UL 94V-0 standard. For a 1 mL quantity, a minimal service cure can be achieved in 15 minutes at room temperature, and a full cure in 4 hours. This product is used to bond heat sinks, LEDs and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips and automatic dispensing systems. 8329TCF has been designed for maximum thermal conductivity with a high viscosity. For a lower viscosity, use 8329TFF. For a longer working life, use 8329TCM or 8329TCS.

ADEKA™ EP-4100, an epoxy resin and compound polymer, is designed for versatile applications, serving both general-purpose and engineered applications. Tailored for plastics and elastomer processing methods, particularly casting, ADEKA™ EP-4100 ensures reliable and efficient performance across a spectrum of industrial processes. With a focus on practicality and adaptability, this polymer proves to be a valuable choice for manufacturers seeking a reliable solution for casting applications in the plastics industry.

ADEKA™ EP-4400, a distinguished epoxy resin and compound polymer, excels at catering to the specialized needs of electrical, electronic, and engineered applications. Engineered for casting, its material features, including its amorphous nature and good adhesion, make it an optimal choice for industries requiring reliability and top-notch performance.

ADEKA™ EP-4100TX, a distinctive epoxy resin and compound blend, features amorphous materials for exceptional properties. Tailored for heat cure processes, this formulation finds its niche in engineered applications within the realm of plastics and elastomers. Specifically designed for casting methods, ADEKA™ EP-4100TX ensures top-notch performance, setting a new standard for reliability and excellence in industrial applications.

ADEKA™ EP-4000, identified by the polymer name epoxy resins and compounds, finds application in engineered and electrical/electronic applications. Noted for its material features of good adhesion and flexibility, this product is specifically tailored for processing methods such as casting in plastics and elastomers. ADEKA™ EP-4000 stands as a reliable choice in industries where superior adhesion, flexibility, and versatile processing methods are essential.

ADEKA™ EP-7001, an epoxy resin and compound polymer, is a cutting-edge solution in the realm of plastics technology. Tailored for casting methods, it exhibits remarkable features like good adhesion and flexibility. Positioned for excellence, ADEKA™ EP-7001 finds its applications in the automotive and transportation and electrical and electronics markets, meeting the demands of electrical and electronic applications and engineering applications with precision.

ADEKA™ EPU-7N, an epoxy resin and compound polymer, embodies cutting-edge plastics technology. Engineered with a focus on providing excellent adhesion and flexibility, this polymer ensures optimal performance in diverse applications. ADEKA™ EPU-7N is useful for superior results in the dynamic field of plastics technology.

BECKOPOX™ EP 128 is a liquid binder and resin falling within the epoxy and epoxy derivatives category of CASE Ingredients. Noteworthy for its solvent-free and VOC-free attributes, this product excels in automotive and transportation, building and construction, industrial, and paints and coatings sectors. It offers exceptional chemical and moisture resistance, good adhesion, and low shrinkage. Tailored for applications like automotive OEM coatings, marine coatings, and industrial castings, it is compatible with metal substrates and various coating types, including solvent-borne and high-solids coatings.

BECKOPOX™ EP 116 is a non-crystallizing liquid resin, tailored for coatings demanding high chemical resistance, as well as adhesives, trowelling, casting, and laminating compounds. Ideal for epoxy coatings, laminates, and solventless or high-solids coatings on metal surfaces, it offers improved chemical resistance and good abrasion resistance. Versatile applications span exterior and interior use, including wallcoverings, decorative laminates, furniture coatings, industrial coatings, and metal coatings. This resin stands out for its adaptability and durability across a spectrum of demanding applications.

BECKOPOX™ EP 140, a liquid binder and resin in the epoxy and epoxy derivatives family by CASE Ingredients, is recognized for its excellent moisture and solvent resistance. Serving the automotive and transportation, building and construction, industrial, and paints and coatings sectors, it offers good adhesion and low shrinkage. This product finds applications in automotive OEM coatings, marine coatings, and industrial settings like tooling and moldmaking. Compatible with metal substrates, its specialized uses encompass adhesives, trowelling, casting, laminating compounds, and coatings demanding high chemical resistance.

EPOXIBOND™ EB-107LP-2 is a two component - optical, medical, and semiconductor grade epoxy resin, with low viscosity, long pot-life, and good handling characteristics.

BECKOPOX™ EP 385W/56WA, an epoxy and epoxy derivative binder and resin by CASE Ingredients, boasts VOC-free labeling. This dispersion provides corrosion resistance, improved chemical resistance, and enhanced flexibility. Targeting automotive, building and construction, and paints and coatings sectors, it excels in applications like automotive OEM coatings, marine coatings, and decorative finishes on metal surfaces and laminates.

ADEKA™ EP-4005, a stellar member of the epoxy resins and compounds family, is tailored to meet the demands of diverse applications. Boasting features like good adhesion, good flexibility, and low viscosity, this polymer ensures superior performance in both electrical/electronic and engineered applications. Specifically designed for use in casting processes within plastics and elastomers, ADEKA™ EP-4005 stands as a reliable choice for those seeking versatility and excellence in their material formulations.

ADEKA™ EP-4100E, an epoxy resins and compounds variant, is tailored for plastics and elastomers processing through casting techniques. ADEKA™ EP-4100E is primarily intended for end uses in electrical and electronic applications and laminates. This specialized polymer ensures optimal performance in these specific industrial applications.

CHEMSET® EE5210 Thixotropic Epoxy Potting Compound – Black is a two component system with flow-control properties which sets to give a tough, resilient, electrically insulating material. It is resistant to temperature fluctuation and is dimensionally stable even under tropical conditions. It will not cause corrosion nor will it shatter on impact.

PRF Composite Materials RS-L285 has very low mixed viscosity, ensuring a fast and complete impregnation of reinforcement fibers without drainage on vertical surfaces. The addition of fillers such as colloidal silica, microballoons, metal powder etc., is also acceptable to obtain special properties. The RS-L285 epoxy resin system exhibits good mechanical properties after curing at room temperature. If high temperature strength (≥ +60°C) or aircraft approval is not required, finished products made with the selection of hardener RS-H285 may be used without further heat treatment. Post curing (heat treatment) will further enhance the mechanical properties and will also increase the high temperature strength, up to 100°C being achievable depending on the selected hardener and post cure cycle used. The properties indicated in this document may only be achieved by curing/post-curing above 50°C.

Park’s E-761 is a versatile self-adhesive epoxy matrix for use in aerospace and commercial applications where ease of processing and cost are key considerations.

HexPly® M92 combines all the key benefits achieved individually with other 125ºC curing epoxy resins, in one new system with no compromise: very good hot-wet performance, high toughness, self-adhesion, fire resistance and long out/tack life. This multi-tasking system has elevated hot wet Tg performance, allowing HexPly® M92 to operate at higher service temperatures, while still benefiting from the lower cost 125ºC cure. HexPly® M92 is available in a wide range of prepreg forms (woven and UD tape).

Toray 8020-FR is a modified epoxy resin system suitable for curing between 70°C (158°F) and 120°C (248°F). The medium viscosity resin is pre impregnated into high performance fibers such as carbon, glass and aramid. Toray 8020-FR offers excellent structural properties, flame retardance and toughness. Toray 8020-FR is designed for structural Applicationss in the motor racing, general industrial fabrications and marine industries and is suitable for a wide range of engineering Applicationss.

AV10AF is a adhesive film prepreg and Adhesive film prepreg for metal-metal, metal-thermoset, thermoset-thermoset, thermoset-honeycomb bonding applications.

Acculam™ Epoxyglas G10 nonFR comprised of a halogen free epoxy resin binder and a woven fiberglass substrate. It qualifies to NEMA G10 and MIL-I-24768/2.This material exhibits high mechanical strength and electrical insulating qualities under both dry and humid conditions. Its ease of fabrication allows its use in many structural and cryogenic applications where halogenated compounds may be undesirable.

HexPly® F584™ is a modified epoxy resin combined with novel proprietary converters to give maximum elongation on high strain carbon fibers while retaining a wet service capability of 200°F (93°C). This system offers greater toughness and impact resistance than conventional 350°F (177°C) cure epoxy thermoset resins.

THINPREG™ TP 402 is a resin system suitable for manufacture of unidirectional prepreg material. ThinPreg™ 402 is a versatile system that is used most often with carbon fiber, but can also be impregnated into a wide range of reinforcing fibers including quartz, glass, aramid fiber etc. ThinPreg™ 402 features a high Tg (180°C) capability with additional toughening, and has been designed to be a good all-round product in terms of mechanical strength and processability.

Havel Composites CZ sro Epoxy resin LH 385 is characterized by low viscosity. When curing amines, or polyamines offer high quality application properties such as high mechanical properties, good chemical resistance, excellent temperature properties, etc. It can also be used as an epoxy varnish, with a suitable hardener.

Letoxit® LFX 023 is applied for production of laminated segments reinforced with glass, carbon or kevlar fibers. Usage - parts of airplanes, sailplanes, sport boats, carriage body.

Duresco NU 510-1 F is a Glass fiber reinforced epoxy molding compound with very good mechanical properties for high temperature applications.

HexPly® M73 is a 350°F (177°C) curing toughened resin with 350°F (177°C) dry and 270°F (132°C) wet service capabilities. HexPly® M73 is formulated for autoclave or press molding and can be cured at 350°F for six hours. A two-hour cure at 350°F with two-hour post-cure at 390°F may also be used. Unidirectional tape and woven fabric impregnated with HexPly® M73 resin will retain tack for 10 or more days at room temperature.

HexPly® M95 is an epoxy resin which meets flammability, smoke, toxicity and heat release requirements for aircraft interiors. It is an alternative to raditional phenolic resins with the advantages of being REACH compliant, providing better mechanical properties and improving the surface aspect. HexPly® M95 epoxy resin is a high Tg epoxy system allowing hot in/hot out extremely fast cure cycles in press. It is an excellent mechanical performance epoxy resin system, suitable for structural and semi-structural parts in the cabin interior with high production rates.

AX-3110 is a Toughened, Flame Retardant Epoxy Fiberglass Prepreg.

MTC9810 is a revolutionary graphene enhanced, honeycomb bondable epoxy resin system designed to produce a durable cost effective component with an excellent surface finish along with enhanced resin toughness. It can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements.

Accura® CeraMAX is a a rigid ceramic-reinforced composite with excellent thermal, moisture and abrasion resistance.applications heat and wear resistant components stiff/rigid assemblies and prototypes composite ceramic-like components esthetic components for art and archival models moisture stable components automotive and aerospace applications a plastic-ceramic composite high thermal resistance excellent abrasion resistance moisture resistant extremely rigid benefits esthetically beautiful white parts withstand temperatures of up to 220°C models that can withstand wear in aggressive applications components can survive in adverse thermal environments components can be plated parts retain properties & dimensions for extended durations.

Lytex® 4181 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 12K tow.

EPH302 is a moderate Tg, highly toughened, controlled flow epoxy prepreg system that can cure in as low as 3 minutes via compression molding process and is designed for high volume, structural applications in automotive and other industrial markets. Quality Certifications - Barrday Composite Solutions is ISO9001 and AS9100 certified

MICAM’s EG-10 Grade is a G-10 epoxide resin laminate, based on a medium weave glasscloth, with excellent machining and punching characteristics.

AX-3112T is a High Toughness, Flame Retardant, Epoxy Fiberglass Prepreg.