Products in Automotive: Carbon Fiber

BB 2100 is a standard modulus carbon fiber precision cut from tow, with typical mechanical properties. These fibers are ideal for introduction into Bulk Molding Compound (BMC) materials, injection molding and pellet production for a wide range of end-use applications. Fibers come with standard epoxy-based sizing chemistry, optimized for use with most thermoset and thermoplastic resin systems. BB 2100 fibers are available as first quality certified materials as well as at discount without certifications. BB 2100 fiber is precision cut according to each customer specified length (e.g. 0.125, 0.25, 0.50 through 2.75" fiber lengths).

High modulus PP compound reinforced with carbon fibers, Particulary suitable for structural parts, Low density for weight savings approach. Resistivity 103. For SDS, please contact Addiplast Group using the 'Request Document' button.

High modulus PA compound reinforced with carbon fibers, Particulary suitable for structural parts, Low density for weight savings approach. Resistivity 108. For SDS, please contact Addiplast Group using the 'Request Document' button.

DRAPFIX Carbon 15066 is highly drapable non-crimp fabric with construction of (0°, 90°), width of 93cm and thickness of 1mm.

Meso-C™ is a precursor material that brings the best properties of carbon forward. Shaping Meso-C™ into the three different and basic forms of foam, fiber and powder allows applications engineers to apply transformative properties to new designs.

E&L Enterprises PC100 is carbon strands milled into very short fibers. Carbon fiber is commonly used as a reinforcement agent for epoxy resins and many thermosetting materials. Because carbon fiber resists corrosion and can withstand high temperatures with little or no abrasion wear, it proves superior over other costly materials like steel and aluminum.

W513716 are special requirements that can relate to strength, thermal properties, resin compatibility and endurance and used by NASA on the space shuttle, straps to lift armament into aircraft, and protective sleeves for hydraulic cylinders.

AKSACA™ 12K A-49 is a High Quality Carbon Fiber.

Osaka Gas Chemicals SC-244 is a donacarbo milled is a powder-like form, which is made by cutting the original fiber into less than 2 mm. It is completely dispersed to various materials, such as powder, pellet, liquid, and viscous resins, and show good electroconductivity, chemical resistance, and anti-corrosion. To meet a wide variety of applications, various fiber lengths are available in our product line.

1168-01:Unidirectional is a 12k Carbon Warp Yarn Fiber with Low Melt Fiberglass fill yarn having a Unidirectional Weave Style

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

Carbon Fabrics 38165 is made of carbon fiber by 5HS weaving style.

ACM C600X is Multiaxial Carbon Fabrics with Standard fabric width of1270 mm having EP/VE Resin compatibility Multiaxial fabrics are textile materials made of several layers of high-strength composite fibers stitched together with thin threads. Multiaxial fabric can be carbon, glass, basalt, and hybrid according to the source fibers.

SC-06-T is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

Sigrafil® C C6-4.0/240-G100 chopped carbon fibers are created through precision cutting of our continuous carbon fiber tows and are available with various sizings and in various cut lengths. They are especially popular as a reinforcing material or filler. As a functional additive, our short carbon fibers are primarily used in the manufacture of compounds for thermoplastic injection molding processes in the high- and low-temperature ranges. In addition, they are ideally suited for turning non-conductive materials such as plastics, resin systems and special papers into conductive ones. chopped carbon fibers are created through precision cutting of our continuous carbon fiber tows and are available with various sizings and in various cut lengths. They are especially popular as a reinforcing material or filler. As a functional additive, our short carbon fibers are primarily used in the manufacture of compounds for thermoplastic injection molding processes in the high- and low-temperature ranges. In addition, they are ideally suited for turning non-conductive materials such as plastics, resin systems and special papers into conductive ones.

Carbon UDs DW0164 is made of UD fabric by plain weaving style.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

350 UT is a carbon Reinforcement.

C-TAPE™ U300P 12K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 310 gsm. It is made using 12K HS carbon fiber. The binding provided by the weft, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

C-PLY™ SP BT400 CT3,4 50K HS is a 400 gsm biaxial spread-tow carbon NCF, 0°/-90°, 200 gsm/ply.It is made using 50K HS carbon fiber.The heavy-tow carbon fiber spreading process enables the manufacture of homogeneous plies combined using a hybrid chain/tricot stitch.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

Blu Dot Asia CCF06HT is produced by chopping carbon fiber roving/thread into shorter lengths with different sizes.

ACM С160T/P is a Balanced Woven Fabric with Standard fabric width of 1250 mm and Custom width range of 300—1600 mm having EP/VE Resin compatibility.

Procotex CF.LS-MLD100 is a mixture of all origin carbon and graphite ex-PAN fibers,obtained from pure carbon fibers, selected and milled for compounding. Its very low sizing level, which can vary, is generally compatible with the widest range of thermosetting and thermoplastic matrixes (polymers and elastomers), also : rubbers, papers, concretes, paints etc.. Its compatibility needs to be checked on each new batch and for each new application.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.

1153-01: Unidirectional is a 12k Carbon Warp Yarn Fiber with Low Melt Fiberglass fill yarn having a Unidirectional Weave Style

C-PLY™ SP U600S7 CT3,4 50K HS is a 600 gsm unidirectional spread-tow carbon NCF, 0°. It is made using 50K HS carbon fiber. The ply is stabilized at 90° so that it is stable for handling.

ACM C450P is a Unidirectional Woven Fabrics with Standard fabric width of 300 mm and Custom width range of 120—1600 mm having EP/VE Resin compatibility. Unidirectional carbon tapes are carbon fabric with at least 85% of the filaments arranged in the same direction. Thin glass, aramid, or hot melt fibers are used as weft (cross fibers). This structure supports the high tensile strength of the carbon tape and makes it a relevant material in demand for construction and many other applications.

TC-03-P is a Carbon Fiber which is widely used fiber in high-performance applications, offering an astonishing range of properties.

C-PLY™ SP U150S5 CT3,4 50K HS is a 150 gsm unidirectional spread-tow carbon NCF, 0°. It is made using 50K HS carbon fiber. The ply is stabilized at 90° so that it is stable for handling.

C-PLY™ SP BX100 C3,4 12K HS is a 100 gsm biaxial spread-tow carbon NCF, +45°/-45°, 50 gsm/ply.It is made using 12K HS carbon fiber.The process used to deposit and spread the carbon fibers enables the manufacture of very lightweight plies combined using a functionalized stitch.

ZOLTEK PX30 carbon scrim is a plain leno weave fabric, produced from 100% ZOLTEK OX spun yarns, that undergo a high temperature, long carbonization soak process to obtain a high purity (>99% carbon) mesh material. The resultant chemically inert fabric exhibits superior thermal stability and a low oxidation rate. More specifically, our ZOLTEK PX30 high-purity carbon scrim fabric is a specialized product designed with an open weave construction which is ideal for applications requiring lightweight secondary reinforcement, such as that used in intumescent coating end uses. The scrim fabrics is usually supplied with an FR coated finish to provide easy handling and installation. In addition, our ZOLTEK PX30 High-Purity Carbon Scrim Fabric is manufactured to the same high quality and high standards as all of the ZOLTEK PX30 woven products.

ZOLTEK PX35 continuous carbon fiber is manufactured from polyacrylonitrile (PAN) precursor. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user the ability to design and manufacture composite materials with greater confidence and allows for efficient and fast buildup of carbon fiber reinforced composite structures. ZOLTEK PX35 50K fibers are available with a variety of sizing formats for different composite processing methods and for compatibility with a wide range of standard resin systems. ZOLTEK quality focuses on spool to spool consistency yielding low coefficients of variation.

HiMax™ multiaxial reinforcements, or non-crimp fabrics (NCF), are made up of multiple plies of parallel fibers, each lying in a different orientation or axis that allows customers to process multiple layers of unidirectional fibers in a single fabric.