Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Benefits
- Excellent coverage
- Solvent free
- Colored for ease of application
- Improves substrate chemical resistance
- Excellent adhesion to a wide range of substrates
Applications & Uses
- Applications
- Usage/Purpose
CS100 Epoxy Primer is designed to prime Tremco surface damp proof membranes and other non-porous surfaces before the application of TREMCO smoothing compounds. Specifically formulated for interior use on particularly smooth or dense surfaces such as:
- Power Floated Concrete
- Precast Concrete
- Terrazzo
- Glazed Ceramic Tiles
- Quarry Tiles
- Hard Flooring Grade Asphalt
- Rigid Metal
- Sound Paint Thickness Coatings.
- Preparation
Surfaces should be clean, firm and free from dust, dirt or other material liable to impair adhesion.
- Mixing
CS100 Epoxy Primer hardens by a chemical reaction. It is essential that the mixing instructions are strictly adhered to:
- Stir Part A and Part B thoroughly before transferring Part B into the Part A container.
- Using a slow speed drill fitted with a TREMCO two bladed propellor (NOT A CEMENT PADDLE), mix the contents for 4 - 5 minutes to obtain uniformity in color and consistency. Ensure all materials from the base and sides of the containers are mixed in thoroughly to ensure a uniform cure.
- Do not mix more 5 kg units than can be used within the working pot life.
- Mixed primer has a working time of approximately 1 hour after which any unused primer MUST be discarded.
- Application
- Apply a thin coat to the substrate using a foam or short pile roller, paint brush or squeegee taking care to prevent the formation of puddles. On smooth impervious substrates, application by squeegee is the most effective way to quickly obtain a very thin film.
- Leave the coating to dry to a translucent, tacky film (usually 3 to 6 hours with a paint roller or brush applications and 1 to 3 hours with a squeegee application - depending on substrate, temperature and ventilation). If in doubt, leave overnight.
- Once dried, the primed surface is ready for overlaying (e.g. to receive Tremco smoothing compounds) and must be kept free of contaminants.
- If more than 24 hours have elapsed since the application, then a repeat application of the primer may be required.
- Coverage
15 to 20 m2 per kg depending on the substrate and method of application
Regulatory & Compliance
- Standards
All aspects of the installation must be in accordance with the requirements of BS 8204, BS 8203 (Installation of Resilient floorcoverings) or BS 5325 (Installation of Textile floorcoverings) and supplementary specifications.
Safety & Health
- Protective Equipment
Use in well ventilated conditions and ensure all recommended protective equipment is worn during handling & use of this product.
Packaging & Availability
- Packaging
CS100 is supplied in a 5 kg pack consisting of Part A - Resin packed in a oversized plastic container which should be used for mixing with Part B - Hardener.
Storage & Handling
- Storage
- Store in shaded dry conditions between +5°C and +25°C
- Protect from frost
- Rotate stocks using oldest material first.
- Shelf Life
6 months when stored as recommended in original unopened containers