company tower banner
SureCrete Company Logo
SureFinish™ is an industrial floor finish providing exceptional performance and adherence to both resilient and non-resilient hard surface interior flooring. It may be applied like a conventional floor finish to terrazzo, quarry tile, brick, slate, unglazed ceramic tile, mexican tile, and stone surfaces.

Product Type: Coating

Application Area: Floor

Compatible Substrates & Surfaces: Asphalt, Brick, Ceramic, Stone

Features: High Gloss, Matte Finish

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Product Type

Features & Benefits

Ready-to-Use Product Features
Features
  • It’s superior scuff, scratch, and detergent resistance insures maximum wear with a minimum of maintenance.
  • It is specifically designed to provide superior protection for interior SureCrete overlays and Eco-Stains that have been sealed with any of SureCrete’s sealers.
  • It acts as a sacrificial wear coat that will indefinitely protect the sealer beneath it.
  • SureFinish will enhance the luster without obscuring the beauty of the surface.

Applications & Uses

Application Area
Compatible Substrates & Surfaces
Uses

It is recommended for use on vinyl asbestos, vinyl, reinforced vinyl, asphalt, and other types of resilient floors.

Coverage
  • First Coat: Approx 1,500 ft² (139 m²) per gallon (3.8 L)
  • Subsequent Coats: Approx 2,000 - 3,000 ft² (186 - 279 m²) per gallon (3.8 L)
Suitability Sample
  • Due to condition-specific sites, always prepare an adequate number of test areas.
  • Wear protection system and esthetic suitability for products’ intended use should be included.
  • On site sample approval is especially critical on substantial, heavy traffic situation or custom coloration.
Clean Up
  • Once SureGrip is mixed into sealer or broadcast onto selected surface, it is nearly impossible to remove while still keeping the sealer viable.
  • If spilled onto dry surfaces, SureGrip can be easily swept up and re-used.
Limitations
  • Product performs best upon a concrete slab that has no ponding of standing water.
  • When masking use caution while taping to a floor that is not completely cured, especially at edges, as delamination may occur.
  • Protect from metal wheel traffic and some furniture where point of contact may be damaging.
  • Chemicals used in tire manufacturing may be detrimental to all sealers from vehicular parking.

Regulatory & Compliance

Slip Resistance
  • Meets ASTM 2047 standard for slip resistance in floor coatings.
  • The addition of SureFinish to any surface will increase slip resistance.

Safety & Health

Cautions
  • Keep out of reach of children.
  • Product is flammable.
  • Avoid sources of ignition.
  • Keep areas ventilated to prevent the accumulation of vapors.

Inhalation:

  • Use NIOSH approved respirator for organic vapors.

Skin Contact:

  • Skin contact may cause irritation.
  • Remove contaminated clothing and wash affected skin with soap and water.
  • Launder clothing before reuse. If symptoms persist, seek medical attention.

Eyes:

  • Wear safety eye protection when applying.
  • If contact occurs, flush eyes with water for 15 minutes, seek medical attention.

Packaging & Availability

Availability

It is available in both a gloss and matte finish.

Packing
  • 1 gal. (3.79 L) can
  • 5 gal. (18.9 L) pail

Storage & Handling

Shelf Life

Under normal conditions, when kept dry and moisture free, out of direct sunlight, the shelf life of an unopened container is (12) months from the date of purchase.

Storage
  • Storage must be under roof and off the floor.
  • Avoid temperature extremes.
  • Rotate inventory to maintain product that is within limits.