Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Processing Information (Injection Molding)
- Rheological Properties
- Injection Moulding Processing Conditions
Under certain conditions the increased thermal conductivity must be considered.
| Value | Units | Test Method / Conditions | |
| Flexural Modulus (Dry) | 14000.0 | MPa | ISO 178 |
| Flexural Modulus (Conditioned) | 7300.0 | MPa | ISO 178 |
| Flexural Strength (Dry) | 240.0 | MPa | ISO 178 |
| Flexural Strength (Conditioned) | 145.0 | MPa | ISO 178 |
| Tensile Modulus (Dry) | 15000.0 | MPa | ISO 527 |
| Tensile Modulus (Conditioned) | 8000.0 | MPa | ISO 527 |
| Tensile Strength (Dry) | 160.0 | MPa | ISO 527 |
| Tensile Strength (Conditioned) | 95.0 | MPa | ISO 527 |
| Tensile Elongation at Break (Dry) | 1.5 | % | ISO 527 |
| Tensile Elongation at Break (Conditioned) | 4.0 | % | ISO 527 |
| Impact Strength (Dry, Charpy, at 23°C) | 45.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Conditioned, Charpy, at 23°C) | 54.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Dry, Charpy, at 23°C) | 7.0 | kJ/m² | ISO 179/1eA |
| Notched Impact Strength (Conditioned, Charpy, at 23°C) | 12.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density (Dry) | 1350.0 | kg/m³ | ISO 1183 |
| Humidity Absorption (Dry) | 0.5 | % | Sim. to ISO 62 |
| Water Absorption (Dry) | 4.7 | % | Sim. to ISO 62 |
| Global Warming Potential (GWP) | 5.57 | kg CO₂ eq. | ISO 14040, 14044 |
| Value | Units | Test Method / Conditions | |
| HDT / A (Dry, 1.8 MPa) | 209.0 | °C | ISO 75-1/-2 |
| HDT / B (Dry, 0.45 MPa) | 221.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point, Dry) | 220.0 | °C | ISO 11357-1/-3 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.12 | % | - |
| Value | Units | Test Method / Conditions | |
| Surface Resistance (Conditioned) | max. 1000 | Ohm | IEC 62631-3-2 |
| Specific Volume Resistance (Dry) | 1000.0 | Ohm*m | IEC 62631-3-1 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 250 - 270 | °C | - |
| Mould Temperature | 60 - 100 | °C | - |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR, Dry) | 50.0 | cm³/10min | ISO 1133 |
| MVR Temperature (Dry) | 275.0 | °C | - |
| MVR Load (Dry) | 5.0 | kg | - |
| Molding Shrinkage (parallel, Dry) | 0.2 | % | ISO 294-4, 2577 |
| Molding Shrinkage (normal, Dry) | 0.5 | % | ISO 294-4, 2577 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80°C in a dry-air dryer for 2-8h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.