Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Optical Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 5600.0 | MPa | ISO 178 |
Flexural Strength | 150.0 | MPa | ISO 178 |
Tensile Modulus | 6000.0 | MPa | ISO 527 |
Tensile Strength at Break | 90.0 | MPa | ISO 527 |
Tensile Elongation at Break | 2.7 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 47.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Charpy, at -40°C) | 47.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 8.0 | kJ/m² | ISO 179/1eA |
Notched Impact (Charpy, at -40°C) | 5.5 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1330.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 146.0 | °C | ISO 306 |
HDT / A (1.8 MPa) | 142.0 | °C | ISO 75-1/-2 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.02 | % | - |
Value | Units | Test Method / Conditions | |
Total Transmission T(Y) (d=1,0mm, A, 2°) | 54.0 | % | ISO 13468 |
Total Transmission T(Y) (d=2,0mm, A, 2°) | 41.0 | % | ISO 13468 |
Total Transmission T(Y) (d=3,0mm, A, 2°) | 32.0 | % | ISO 13468 |
Total Transmission T(Y) (d=4,0mm, A, 2°) | 25.0 | % | ISO 13468 |
Haze T(Y) (d=1.0 mm, A, 2°) | 95.0 | % | ISO 13468 |
Haze T(Y) (d=2.0 mm, A, 2°) | 95.5 | % | ISO 13468 |
Haze T(Y) (d=3.0 mm, A, 2°) | 95.5 | % | ISO 13468 |
Haze T(Y) (d=4.0 mm, A, 2°) | 95.5 | % | ISO 13468 |
Half Power Angle T(Y) (d=1mm, A, 2°) | 49.0 | Degree | - |
Half Power Angle T(Y) (d=2mm, A, 2°) | 60.0 | Degree | - |
Half Power Angle T(Y) (d=3mm, A, 2°) | 62.0 | Degree | - |
Half Power Angle T(Y) (d=4mm, A, 2°) | 63.0 | Degree | - |
Value | Units | Test Method / Conditions | |
Melt Temperature | 290 - 320 | °C | - |
Mould Temperature | 80 - 130 | °C | - |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 13.0 | cm³/10min | ISO 1133 |
MVR Temperature | 300.0 | °C | - |
MVR Load | 1.2 | kg | - |
Shrinkage (Lengthwise, 24h) | 0.2 - 0.4 | % | ISO 294-4 |
Shrinkage (Lateral, 24h) | 0.2 - 0.4 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- General Assembly and Design
- Pre-Drying Conditions
120 °C in a dry air (dessiccant) dryer for 2-3 h
- Technical Data
Storage & Handling
- Storage Conditions
Store in dry, protected from light.