Knowde Enhanced TDS
Identification & Functionality
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
- Product Features
- Lower WVTR (water vapor transmission rate) compared to other general biodegradable plastics.
- Superior heat resistance compared to other general biodegradable plastics.
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Typical Properties
- Recommended Operating Conditions
- Note
The conditions are examples for sheet molding.
| Value | Units | Test Method / Conditions | |
| Melt Flow Rate (at 160°C, 21.2 N) | 4.0 | g/10 min | ISO 1133 |
| Melt Flow Rate (at 190°C, 21.2 N) | 14.0 | g/10 min | ISO 1133 |
| Density | 1.39 | g/cm³ | ISO 1183 |
| Young Modulus (Machine Direction) | 1550.0 | MPa | ISO 527-3 |
| Young Modulus (Transverse Direction) | 1720.0 | MPa | ISO 527-3 |
| Yield Stress (Machine Direction) | 29.0 | MPa | ISO 527-3 |
| Yield Stress (Transverse Direction) | 28.0 | MPa | ISO 527-3 |
| Tensile Strength (Machine Direction) | 24.0 | MPa | ISO 527-3 |
| Tensile Strength (Transverse Direction) | 25.0 | MPa | ISO 527-3 |
| Elongation at Break (Machine Direction) | 9.0 | % | ISO 527-3 |
| Elongation at Break (Transverse Direction) | 6.0 | % | ISO 527-3 |
| Water Vapor Transition Rate (at 40°C, 90% RH, 100 μm) | 30.0 | g/(m².day) | JIS Z 0208 |
| Heat Deflection Temperature (at 0.45 MPa) | 99.0 | °C | ISO 75 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 150 - 160 | °C | - |
| Feed Throat | 20 - 40 | °C | - |
| Feed Temperature | 150 - 160 | °C | - |
| Barrel Temperature | 150 - 160 | °C | - |
| Adapter Temperature | 150 - 160 | °C | - |
| Die Temperature | 150 - 160 | °C | - |
| Chill Roll Temperature | 40 - 50 | °C | - |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
- Packaging Information
Forzeas™ pellets are dried and packed in aluminum-lined packaging before delivering to customers.
Storage & Handling
- Storage and Handling Conditions
- Do not store outdoors. Keep dry at ambient temperature. Avoid humid environment, heat and direct sunlight.
- Use material as soon as possible after the delivery, in order to prevent possible material quality deterioration.
- Pre-dry of the unopened Forzeas™ is not necessary.
- It is recommended to keep packages sealed until ready to process and using up the whole 25-kg bag.
- Unused material should be tightly sealed, kept away from open air, and pre-dried (at 60 °C for over 5 hours).