Products

Dragonsorb® 3039 is a liquid UV absorber with a stable morphology. It has good compatibility with all common plasticizers. This product is especially suitable for the stabilizers of PVC-P and PVC plastisol. It can also be used in polyurethane (PUR), polyester, polymethacrylate (PMMA), and other materials to improve the weatherability of the materials under UV conditions.

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flyadd® AY1 is a color stabilizer and anti-yellowing agent. It is used as a polymer additive for polyurethane and is a highly effective additive for many kinds of dispersed polymer systems. This product has the potential to improve color and heat stability in processing and end applications. 

Dragonsorb® 320 is a highly effective light stabilizer that features strong UV absorption, low volatility, and excellent compatibility with a variety of substrates. It protects polymers as well as organic pigments from UV radiation, which helps preserve the original appearance and physical integrity of molded articles, films, sheets, and fibers during outdoor weathering. This product is slightly more discoloring than conventional UV absorbers. It can be used for a variety of plastics and other organic substrates, including unsaturated polyesters, PVC, and PVC plastisol. Additionally, good results are expected when this product is used in polycarbonates, polyurethanes, polyamides, and synthetic fibers, particularly those with a polyester, epoxy, or isocyanate resin base.

Flyadd® AY3 is a liquid-type blend anti-yellowing agent that can inhibit the yellowing of the polyurethane caused by high-temperature processing. It has excellent ultraviolet absorption performance, which can effectively improve the weatherability of the product and inhibit the yellowing caused by thermal oxygen and ultraviolet light.

Dragonox® 323 is an antioxidant with applications in rosin resins, such as penta rosin ester and glycerol rosin ester. Adding 0.2 ~ 0.3% of this product can greatly improve the color of rosin ester by 2 ~ 3 in Gardner measure, and 0.2% of this product will effectively improve the anti-crystallized character of rosin. It also functions as an effective catalyst in disproportionation and can be used as a substitute for platinum and palladium.

Dragonox® PDP is a liquid-type antioxidant with good color and heat stability. This product is widely used in polyvinyl chloride (PVC), acrylonitrile butadiene styrene (ABS), polyurethanes (PU), polycarbonates (PC), and coatings.

Dragonsorb® 111 functions as a UV absorber. This slightly yellow solid is a blend of Dragonsorb® 119 and Dragonsorb® 622 which are light stabilizers compatible with polymers such as polyethylenes (PE), thermoplastic polyolefins (TPO), polypropylene (PP), acrylonitrile butadiene styrene (ABS), etc.

Dragonsorb® 360 is a dimeric 2-hydroxy benzotriazole UV absorber used in a variety of polymers and resin compositions. This product has very low volatility and high thermostability. It can be used in polyacrylic resin, polyalkene, polyamide, and elastoplastic goods with good compatibility and higher UV absorbability. This yellowish powder is insoluble in water, and soluble in esters and benzoid solvents. It shows a synergistic effect when used with other additives such as antioxidants.

Dragonsorb® 234 is a highly effective UV absorber for polymers that are usually processed at high temperatures. These polymers include polycarbonate, polyesters, polyacetal, polyamides, polyphenylene sulfide, ABS compounding, polyphenylene oxide, aromatic copolymers, thermoplastic polyurethane, and polyurethane fibers.

Flyadd® AY20 is a liquid-type compounded anti-yellowing agent that can increase the thermal resistance and anti-aging properties of PU products. This highly efficient product has excellent anti-thermal oxygen and ultraviolet absorption functions and can effectively inhibit the yellowing caused by high-temperature processing or ultraviolet light.

Dragonox® 1425 is a high-molecular-weight phenolic antioxidant containing phosphorus. This product is a highly efficient, non-discoloring stabilizer for organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oils, and fats. It protects these substrates against thermo-oxidative degradation. This product is odorless, stable to light, and has excellent color retention. It has good compatibility with most substrates and high resistance to extraction.

Dragonsorb® 3346 is a UV absorber that offers minimal color contribution. This product has low volatility and very good compatibility with other HALS and UVAs. It possesses a good solubility/migration balance and is mainly used in non-food consumer packaging such as PE and PP films.

Dragonsorb® 765 is a UV absorber and light stabilizer that is mainly used for polyethylenes (PE), polypropylenes (PP), polyesters, and coatings.

Flyadd® 3G is a nucleating agent.

Flyprene SBS 791 is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 30% (wt.%). It is used in asphalt modification, and as a waterproofing material. This product may also find use as a modifier for polymers and adhesives.

Dragonsorb® P is an ultraviolet absorption agent with a maximum absorption wavelength of 270 - 380nm. It is available for polyester, epoxy, cellulose acetate, PVC, polystyrene, plexiglass, polyacrylonitrile resin, etc. The general consumption of this product is 0.1 - 0.5% for thin matter and 0.05 - 0.2% for thick matter.

Dragonsorb® 3853S functions as a UV absorber. This white or off-white granulated product finds application in the manufacture of PE tapes, injection moldings, sheets, metallocene, PP films, tapes, fibers, TPO polyacetals, ASA, ABS, and HIPS.

Dragonox® 565 is a highly effective anti-oxidant used for a variety of elastomers, including polybutadiene (BR), polyisoprene (IR), emulsion styrene butadiene (SBR), nitrile rubber (NBR), carboxylated SBR latex (XSBR), and styrenic block copolymers such as SBS and SIS. This product is also used in adhesives (hot melt, solvent-based), natural and synthetic tackifier resins, EPDM, ABS, impact polystyrene, polyamides, and polyolefins.

Dragonox® 425 is a highly effective antioxidant used in synthetic resins such as ABS resin, polyethylene, and polypropylene. This product can also be used for light-colored rubber. It provides high anti-oxidation performance, thermal stability, and ultraviolet light stabilization.

Dragonox® 1330 is used in polyolefins such as polyethylene, polypropylene, and polybutene for the stabilization of pipes, molded articles, wires, cables, dielectric films, etc. Furthermore, it is applied to other polymers, such as engineering plastics like linear polyesters, polyamides, and styrene homo- and copolymers. This product may also be used in PVC, polyurethanes, elastomers, adhesives, and other organic substrates.

Dragonox® 1098 can be widely used for nylon 6, nylon 66, PE, PP, PA, rubber, and so on. This product is non-discoloring and has low volatility, good extraction resistance in hot water, and a good synergistic effect with general antioxidants. The recommended use level for this product is 0.1－0.5%.

Dragonox® 1076 is a phenolic primary antioxidant used for processing and long-term thermal stabilization. This product has good heat resistance and water extraction performance. It can be applied to polyolefins, such as polyethylene, polypropylene, and polybutene-1, as well as to other polymers, such as engineering plastics, styrene homo- and copolymers, polyurethanes, elastomers, adhesives, and other organic substrates.

Dragonsorb® 327 is a UV absorber that can strongly absorb 270 ~ 400nm ultraviolet light with low volatility and good chemical stability. The combination of the ultraviolet absorber 327 and an antioxidant has an obvious synergistic effect. This product has excellent heat resistance and washing resistance. It has good compatibility with polyolefin and is suitable for polyethylene, polypropylene, PVC, polymethylmethacrylate, polyformaldehyde, polyurethane, unsaturated polyester, ABS, epoxy resin, cellulose resin, etc. The recommended dosage level of this product in plastic is generally 0.3 - 0.5%.

Dragonsorb® 1577 is a UV absorber whose applications include polyalkene terephthalates and naphthalates, linear and branched polycarbonates, modified polyphenylene ether compounds, and various high-performance plastics. Relevant applications also include the use of homo-, co-, or terpolymer structural compositions in thermoplastic materials. The use of this product is indicated in polymer blends and alloys, such as PC/ABS, PC/PBT, PPE/IPS, PPE/PA, and copolymers, as well as in reinforced, filled, and/or flame-retardant compounds, which can be transparent, translucent, and/or pigmented. Due to its very low chelating tendency, formulations in polymers containing catalyst residues are possible.

Dragonox® PS802 is an effective stabilizer in polyolefins, especially in polypropylene and HDPE. They are usually used in combination with phenolic antioxidants to enhance aging stability and photostability. In most cases, the additive effect is better than the main antioxidant alone, and the initial color of the material will also be improved. It is especially suitable for the stability of high-impact polystyrene and ABS resin. This product also improves the use effect of phenolic antioxidants. Additionally, it can be used in animal and vegetable oils, fats, paraffin, soap, and other organic compounds.

Dragonox® 168 is a highly effective phosphite antioxidant. It acts as a secondary antioxidant and can be blended with several kinds of primary antioxidants. During processing, this product reacts with hydroperoxides formed by the autoxidation of polymers to improve the effective protection of the polymers' color.

Dragonox® 4000 functions as a stabilizer which can provide excellent thermal stability as well as color improvement. This light yellow, transparent liquid is widely used in PVC (Polyvinyl Chloride), ABS (Acrylonitrile Butadiene Styrene), SBR (Styrene Butadiene Rubber), etc.

Dragonsorb® 3853PP5 is a UV absorber that is mainly used for the following applications: Polyethylene (PE): Flat wire, injection molding, and roll molding products. Polypropylene (PP): Flat wire, film, injection molding products, TPO, polyolefin alloy, hips, ABS, and ASA.

Flyadd® AY2 is a highly efficient liquid-type compounded anti-yellowing agent, which can effectively absorb 240 - 330 nm UV light. It has better resistance to yellowing when compared to the traditional benzophenone type or benzotriazole type UV Absorber. It is widely used in polyurethane foam material for shoes, insoles foam, adhesives for shoes, and other materials. This product is particularly suitable for outdoor use.

Dragonox® CA is a highly effective phenolic antioxidant that is suitable for PP, PE, PVC, polyamide, ABS resin, polystyrene, and cellulosic plastics. This low-volatile substance has high thermal stability and does not decompose during high-temperature processing. It is non-polluting, non-coloring, and can significantly change the heat and oxygen resistance of products. Additionally, this product is used in polyolefin cable products, and it has a good synergistic effect with DLTDP, dstdp, and UV absorbers. The general dosage level of this product is 0.02 - 0.5%.

Flyadd® OB-1 is an optical brightener that is used as a good whitening agent for polyester-cotton blend fabric or various kinds of plastics and their products under high temperatures. This product is insoluble in water, but soluble in high boiling point organic solvents such as phenyl-chloride.

Dragonox® 697 functions as an antioxidant.

Flyadd® B1 is a high-performance β-type nucleator tor polyolefin. It can improve the impact strength and porosity of PP materials. This product is suitable for household appliances, PPR pipes, automobile bumpers, accumulator tanks, batteries, micropore PP fibers, ventilated packaging membranes, lithium battery diaphragms, etc.

Dragonsorb® 326 is an important ultraviolet absorber of the benzotriazole series. This slightly yellow UV absorber is non-toxic and has good stability. It has higher absorbency for ultraviolet rays and is widely used for photosensitive materials, polymerized materials, coatings, and so on.

Dragonox® 1726 is an effective thermo-oxidative stabilizer for adhesive materials. It is also suitable for SBS/SIS block copolymers and polyurethane sealants.