Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Note
EPIMIX PBT glass fiber reinforced grades are used in all sectors of industry, has and excellent surface finish, low warpage and all around excellent mechanical properties.This material is available in natural and colors on request
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Flammability
| Value | Units | Test Method / Conditions | |
| Flexural modulus (2mm/min) (23°C) | 3500 | MPa | ISO 178 |
| Unnotched izod impact (23°C) | 35 | kJ/m² | ISO 180/1U |
| Flexural strength (2mm/min) (23°C) | 130 | MPa | ISO 178 |
| Tensile modulus (1mm/min) (23°C) | 4700 | MPa | ISO 527-2 |
| Tensile strain at break (5mm/min) (23°C) | 3,5 | MPa | ISO 527-2 |
| Tensile stress at break (5mm/min) (23°C) | 95 | MPa | ISO 527-2 |
| Unnotched charpy impact (23°C) | 40 | kJ/m² | ISO 179/1eU |
| Value | Units | Test Method / Conditions | |
| Ash content | 10 | % | ISO 3451-4 |
| Mold shrinkage- parallel/normal (3mm) | 0,3/1,0 | % | ISO 294-4 |
| Density (23°C) | 1,35 | g/cm3 | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Melting point | 225 | °C | ISO 3146 |
| Temp. of deflection under load (1,80 MPa) | 190 | °C | ISO 75-2/A |
| Notched charpy impact (23°C) | 6 | kJ/m² | ISO 75-2/B |
| Notched izod impact (23°C) | 5 | kJ/m² | ISO 180/1A |
| Temp. of deflection under load (0,45 MPa) | 220 | °C | ISO 75-2/B |
| Value | Units | Test Method / Conditions | |
| Properties | 400 | V | EN 60112 |
| Value | Units | Test Method / Conditions | |
| Properties | HB | - | EN 60695-11-10 |