Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Composites Processing Methods
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Processing Information (Injection Molding)
- Processing Information (Compression Molding)
Value | Units | Test Method / Conditions | |
Density | 11 | g/cc | ASTM D792 |
Value | Units | Test Method / Conditions | |
Tensile Elongation at Break | 3.5 | % | ASTM D638 |
Tensile Strength | 6 | MPa | ASTM D638 |
Tensile Modulus | 2349 | MPa | ASTM D638 |
Izod Impact Strength (notched) | 53 | J/m | ASTM D256 |
Flexural Modulus | 1972 | MPa | ASTM D790 |
Flexural Strength | 14 | MPa | ASTM D790 |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature (at 66 psi) | 77 | °C | ASTM D648 |
Heat Deflection Temperature (at 264 psi) | 66 | °C | ASTM D648 |
Value | Units | Test Method / Conditions | |
Surface Resistivity | 0.2 | ohms/sq | ASTM D257 |
Value | Units | Test Method / Conditions | |
Melt Temperature Range | 175 - 225 | °C | - |
Mold Temperature Range | 20 - 65 | °C | - |
Mold Shrinkage Rate | 0.6 - 1.0 | % | ASTM D955 |
Pre-Drying Conditions | Not Required | - | - |
Value | Units | Test Method / Conditions | |
Melt Temperature Range | 175 - 225 | °C | - |
Mold Temperature Range | 20 - 65 | °C | - |
Mold Shrinkage Rate | 0.6 - 1.0 | % | ASTM D955 |
Pre-Drying Conditions | Not Required | - | - |
Regulatory & Compliance
- Certifications & Compliance