Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Conditions
Temperature should be above 10ºC.,/p>
- Recommended Film Thickness
Two coats at 25 microns (1, mil) dry film thickness, total 50 microns (2 mils) dry,/p>
- Number Of Coats
Two coats recommended.,/p>
- Thinning
May be thinned up to 10% with 85-0303 reducer,/p>
- Coverage
Theoretical coverage at 1 mil D.F.T. is 15.75 m2 per liter (642 ft2 per U.S. gallon). Practical coverage based on a 15% loss factor would be 13.39 m2 per liter (546 ft2 per U.S.gallon) Actual coverage may vary depending on color.
- Dry Times
Touch dry in 4 hours, re-coat, overnight,/p>
- Clean Up
Use 85-0311 reducer,/p>
- Recommended Use
For use on all surfaces where a durable finish is required., Leatherjacket can be applied over wood, steel, aluminum, or, concrete with excellent results., , color: General industrial colors., COVERAGE: Theoretical coverage @ 1 mil D.F.T. is 15.75 m2, per liter (642 ft2 per U.S. gallon). Practical coverage based on, a 15% loss factor would be 13.39 m2 per liter (546 ft2 per U.S., gallon) Actual coverage may vary depending on color., , SOLIDS: Approximately: 40% by volume, 56% by weight., WEIGHT: Approximately 1.05 kg/l, , NEW SURFACE PREPARATION: Surface to be coated must be, clean, dry and free of oil, grease and other contamination., Wood: Surface whould be sanded smooth., Prime with 35-0677 ULTIMA Enamel Undercoater., Steel: sandblast or wire brush. If surface is rusted use 85-0336, Chem-Etch metal conditioner after mechanical surface, preparation. If additional corrosion protection is required,, surface may be primed with 50-0350 primer or 50-2050 Fast, Dry Primer., , , , AlDuISmCLinAuIMmER: Use 50-1619/20 Vinyl Wash Primer., The technical data furnished above by the Consolidated Coatings Company is provided for information purposes only and is, to the best of our knowledge. SinceC, onapcprleicatteio:n s murefthaocdes asnhdo cuolndd itbioen se atrceh beydo nwd iothur 1co0n%tro ml, wuer icaatninco ta ocfifder a, tog uparraonvteide eor mwaarrxainmty,u rmepr aesdehnteatsioion,n o.r condition, express or implied, whether, arising by statute, by operation of law, or otherwise, (including merchantability or, Drfiytniensgs fTori ma pea:rt iDcuulasrt p furrepoes:e )1 w5it hm rienspuetcet sto this product and we assume no, (@re s2po5n°sCib)i liTtyo oTr oliuabcihlit:y 2o fh aonuy rksi nRde fcoor acotv: e2ra hgeo, upresrf ormance or damage, Cl(ewahent huerp a:r iCsilnega frno mw nitehgl igtehnicnen oef rthse vendor or otherwise) resulting from the installllllllllllllation, operation, use or performance of this product., Unnamed: 0, Concrete: surface should be etched with 10% muriatic acid, to provide maximum adhesion.,,/p>
- Repaint Surface Preparation
Remove all chalking, peeling paint. Sand glossy areas. Remove, all loose dirt, dust, etc. and spot prime all bare areas., , APPLICATION: For best results, spray. Use conventional spray,, airless or air assisted airless. Leatherjacket can also be brushed, or rolled.,,/p>
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Solids By Weight | approx. 56 | % | - |
| Solids By Weight | approx. 1.05 | kg/ litre | - |
| Solids By Volume | approx. 40 | % | - |
| Clean up | Use 85-0311 reducer | - | - |
Packaging & Availability