Ceramic industrial coating AquaTop I WB8830XXx

Identification & Functionality

Chemical Family

Acrylics & Acrylates

Product Type

Top Coat,

Waterborne Coating

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Paints & Coatings

Top Coats

Features & Benefits

Labeling Claims

APEO-free,

HAPs-free,

Low VOC,

NMP-free

Ready-to-Use Product Features

Cleanable,

Consistent High Quality,

Fast Drying,

Low VOC,

Pigmentable

Features

• High build
• Quality finish
• Extremely Fast Stack Time
• Water based, low VOC, HAPs compliant
• Robust application properties
• Fast Dry to touch an Sand
• Easy water clean-up
• Easily tinted using standard pigment dispersions

Product Benefits

The benefits of water-based opaque finishes

• Infinite color possibilities with custom color matching expertise
• Colors have excellent durability and stability – will not fade
• Tinted primers available for dark colors
• Safe, non-toxic and environmentally-friendly
• GREENGUARD certifications
• Non-flammable
• Durability equivalents to traditional solvent products
• Application-friendly and ideal processing times

Applications & Uses

Markets

Consumer Goods,

Paints & Coatings

Applications

Paints & Coatings — Building & Construction

Wood Coatings & Finishes

Consumer Goods — Furniture

Application Area

Furniture

Application Method

Spray

Compatible Substrates & Surfaces

Wood

Mixing/Application Procedure

Mixing

Mix thoroughly to ensure uniform consistency and color.
Reducer

Deionized or distilled water
Application

• Spray applied using conventional equipment, airless, air-assisted or HVLP equipment.
• Apply approximately 2-4 wet mils for 1-1.5 mil dry film thickness.

Surface Preparation

• Wood must be clean, dry and finish sanded. Substrates should be free of grease, oil, dirt, fingerprints and any contamination to ensure optimum adhesion and coating performance properties. Moisture content of wood should be 6 to 8 %.
• Sand first coat in order to eliminate grain raising and to improve the adhesion of the subsequent coat. 150 grit on open grain and 180 grit on closed grain wood. Always sand the sealer-coat within 8 hours prior to top-coating to improve adhesion.

Use Directions

For interior use only. Mix thoroughly before application. Stack only when the surface temperature is below 90F. Quicker stacking times are achievable relative to the amount of
product that is applied.
Drying Times

Air Dry (65-75°F)	15-20 minutes dry to touch / handle
Air Dry (65-75°F)	25-30 minutes dry to sand / recoat
Air Dry (65-75°F)	8 hours dry to pack

Tinting: Novocolor IP colorants up to 8% colorant by weight.
Clean Up: Soap and water
Recommended Primer : WB-8348 AquaSurf

Properties

Typical Properties

	Value	Units	Test Method / Conditions
60° Gloss (Low)	Approx. 20	gloss	-
60° Gloss (Semi)	Approx. 50	gloss	-
Weight per Gallon	10.6	lbs/gallon	-
Viscosity as Supplied (77°F, Zahn 3 Signature)	25 - 35	seconds	-
Coverage (1 mil)	513*	ft²/gal	-
Sag resistance	4	mils	-
Weight Solids	47.0*	%	-
Volume Solids	31.5*	%	-
VOC (Packaged (86 g/l))	0.71	lb/gal	-
VOC/Solids	0.144*	Lbs.	-
VHAPS/Solids	0.001*	Lbs.	-
Working Temperature	60 - 90	°F	-

Note

*Values calculated from formula.

Storage & Handling

Shelf Life

Shelf life ifunopened is 1 year (at 60-77F); never expose to freezing temperatures.