Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Ready-to-Use Products
Paints & Coatings
Products in Paints & Coatings: Stains
35 Products found in Paints & Coatings
Browse
Applications
Show All 9 Categories
Filters
Suppliers
Applications
Product Type
Compatible Substrates & Surfaces
Application Method
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
Swing Paints
Circa 1850® Fine Wood Stain
Ready to Use Product Type:
Stains
Compatible Substrates & Surfaces:
Wood
Features:
Good Washability
Circa 1850® Fine Wood Stain is designed to provide uniform staining on all unfinished interior wood surfaces. As a true oil-based stain, it highlights the natural grain of wood without causing any grain raise. As a "water-wash", Circa 1850® Fine Wood Stain is formulated to clean up easily with water. Circa 1850® Fine Wood Stain is available in 13 wood tones.
Swing Paints
Circa 1850® Stain'n Varnish
Applications:
Furniture, Wood Coatings & Finishes, Floor Coatings
Product Families:
Stains & Varnishes, Paints & Coatings
Circa 1850® Stain'n Varnish is both a wood stain and a varnish finish in one. Its unique gel formulation maintains a consistent blend of stain and varnish throughout the can, so there's no mixing or stirring required. As a result, you ensure uniformity from the beginning of your project to the end. And because it's a gel, it goes on without runs, drips or brush marks. Stain'n Varnish can be used on virtually any surface including wood furniture, molding, paneling and floors, pottery, metal, plastic, fiberglass, masonite and composites (or composite doors). Stain'n Varnish comes in 22 pre-mixed colors (and about a million custom-tinted colors) to suit any decor.
Swing Paints
Circa 1850® Aqua Wood Stain
Applications:
Furniture, Floor Coatings, Decorative Paints, Coatings & Stains
Product Families:
Stains & Varnishes, Paints & Coatings
Circa 1850® AQUA is a water-based wood stain made with the finest ingredients. It is formulated to highlight the natural grain of unfinished wood without the need for a pre-stain conditioner. Circa 1850® AQUA eliminates overlap marks and grain raising, providing uniform, beautiful color. Circa 1850® Aqua Wood Stain is available in 30 vibrant woodtone and designer colors.
Euclid Chemical
Aquastain T-96
Ready to Use Product Type:
Stains
Application Areas:
Decorative Surfaces
Compatible Substrates & Surfaces:
Concrete
Features:
Good Weather Stability, Cold Resistance, Heat Resistance, Water-based
Aquastain T-96 is a penetrating, non-flammable, decorative, water-based, liquid polymer stain. Aquastain T-96 retains the natural texture of the concrete or masonry surface without leaving a "painted look." It resists ultraviolet degradation, airborne dirt, smog, industrial fumes, acid rain, and most other atmospheric chemicals. AQUASTAIN T-96 is a water-based formulation based on acrylic resins, inorganic pigments, fillers, and proprietary additives.
Dukepolytech Corporation
DuroAcro® DP674
Applications:
Furniture, Industrial Coatings, Wood Coatings & Finishes
Product Families:
Protective Coatings, Stains & Varnishes, Paints & Coatings
Chemical Family:
Acrylics & Acrylates
DuroAcro® DP674 is a pure acrylate emulsion.
Classic Coatings Systems
Classic Coatings Systems Matte Sealer
Ready-to-Use Product Type:
Sealer, Stains, 2K (2 component) Coating
Compatible Substrates & Surfaces:
Concrete, Masonry
Features:
Low VOC, Water Resistant, Non Corrosive, Slip, Good Penetration, High Durability, Excellent Hot Tire Pickup Resistance, UV Stabilized, Chemical Resistant, Low Odor, Good Adhesion, Cost Effective, Acid Resistant, Fast Drying, Good Non-Yellowing Properties, Matte Finish, Low Fume, Cleanable, Enhanced Film Water Repellency, Oil Resistant
Application Method:
Roller
Chemical Family:
Acrylics & Acrylates, Aliphatics
Classic Matte Sealer is an acrylic, single component sealer that is designed to be used over all of our stains and on polymer-modified cement toppings, waterborne colorants, concrete, brick, masonry, pavers, Spanish tile, stucco, and natural stone. Be sure to properly prepare surfaces before applying.
Tambour
Tambour Water based Varnit - Matt 786-000
Applications:
Waterproofing & Weatherproofing, Fence, Decks & Rails, Sports & Recreation
Product Families:
Stains & Varnishes, Paints & Coatings
Chemical Family:
Acrylics & Acrylates
Tambour Water based Varnit - Matt 786-000 is Water based acrylic transparent wood stain. Designed to protect wooden surfaces and maintain the natural texture of the wood. Interior and exterior use.
Tambour
Tambour Solvent based Varnit 485-200 clear matt
Applications:
Waterproofing & Weatherproofing, Fence, Decks & Rails, Furniture
Product Families:
Stains & Varnishes, Paints & Coatings
Tambour Solvent based Varnit 485-200 clear matt is Highly durable solvent based wood stain in various colors. For interior and exterior use.
Classic Coatings Systems
Classic Coatings Systems Pro-Seal 5000 Matte Finish Lacquer Sealer
Ready-to-Use Product Type:
Lacquers, Sealer, Stains, 1K (1 component) Coating, Waterborne Coating
Compatible Substrates & Surfaces:
Concrete, Masonry
Features:
High Durability, Excellent Hot Tire Pickup Resistance, UV Stabilized, Good Adhesion, Cost Effective, Fast Drying, Good Non-Yellowing Properties, Matte Finish, Cleanable, Enhanced Film Water Repellency, Low VOC, Water Resistant, Good Penetration
Chemical Family:
Acrylics & Acrylates
Classic pro-seal 5000 is a matte, low VOC, single component, high solids, solvent (acetone) based sealer that is designed to be used over polymer modified cementitious toppings, concrete, waterborne colorants, masonry, stone, pavers, and brick. It may be used for exterior applications in a wide range of climates.
Dukepolytech Corporation
DuroAcro® DP685
Chemical Family:
Acrylics & Acrylates
Ready to Use Product Type:
Stains
Compatible Substrates & Surfaces:
Wood
DuroAcro® DP685 is a pure acrylate emulsion.
Classic Coatings Systems
Classic Coatings Systems Satin Medium Gloss Sealer
Ready-to-Use Product Type:
Waterborne Coating, Sealer, Stains, 1K (1 component) Coating
Compatible Substrates & Surfaces:
Concrete, Masonry
Features:
Good Penetration, High Durability, Excellent Hot Tire Pickup Resistance, UV Stabilized, Low Odor, Good Adhesion, Cost Effective, Medium Gloss, Fast Drying, Good Non-Yellowing Properties, Low Fume, Cleanable, Enhanced Film Water Repellency, Low VOC, Water Resistant
Chemical Family:
Acrylics & Acrylates
Classic satin medium gloss is a clear single component acrylic sealer that is designed to be used over all of our stains, polymer-modified cement toppings, waterborne colorants, masonry, concrete, pavers, natural stone and brick. Classic satin medium gloss sealer is a waterborne acrylic with low VOC, no fumes, low odors and high solids. May be used for interior or exterior applications in a wide range of climates.
Classic Coatings Systems
Classic Coatings Systems High Gloss Armor 2K Sealer
Ready-to-Use Product Type:
Sealer, Stains, 2K (2 component) Coating, Waterborne Coating
Compatible Substrates & Surfaces:
Masonry, Concrete
Features:
Low Odor, High Gloss, Enhanced Film Water Repellency, Oil Resistant, Water Resistant, Excellent Hot Tire Pickup Resistance, Chemical Resistant, Good Adhesion, Cost Effective, Acid Resistant, Fast Drying, Good Non-Yellowing Properties, Low Fume, Cleanable, Low VOC, Non Corrosive, Slip, Good Penetration, High Durability, UV Stabilized
Application Method:
Roller
Chemical Family:
Polyurethanes (PU), Aliphatics
Classic Satin Armor 2K Aliphatic-Polyurethane Sealer is a clear, 2-part component, voc< 19/1 63% solids, waterborne, special blend sealer that is designed to be used over all of our stains, as well as polymer modified cementitious toppings, masonry, concrete and waterborne colorants. May be used for exterior & interior. Satin Armor 2k provides UV stability and will not yellow.
Eco Chemical
Eco Chemical™ Fence Stain
Ready to Use Product Type:
Stains, Waterborne Coating
Compatible Substrates & Surfaces:
Wood
Features:
Cost Effective, Improved Surface Quality, Good Scratch Resistance, High Coverage, Low VOC, High Capacity of Penetration, High Durability
Eco Chemical™ Fence Stain is a high-quality, oil-based finish in a low-VOC,waterborne formula. It is a variety of rich colors guaranteed for 4 years. It is an attractive fence product at a reasonable cost.
Euclid Chemical
Aquastain HS
Ready to Use Product Type:
Stains
Application Areas:
Brick
Compatible Substrates & Surfaces:
Stone, Concrete
Features:
Mildew Resistant, Good Adhesion, Water Resistant, Breathable, Fungus Resistant, Good Color Stability
Aquastain HS is a water-based, acrylic stain used to protect and decorate vertical masonry and concrete surfaces.
Classic Coatings Systems
Classic Coatings Systems Satin Armor 2K Sealer
Ready-to-Use Product Type:
Waterborne Coating, Sealer, Stains, 2K (2 component) Coating
Compatible Substrates & Surfaces:
Concrete, Masonry
Features:
Enhanced Film Water Repellency, Oil Resistant, Low VOC, Water Resistant, Non Corrosive, Slip, Good Penetration, High Durability, Excellent Hot Tire Pickup Resistance, UV Stabilized, Chemical Resistant, Low Odor, Good Adhesion, Cost Effective, Acid Resistant, Fast Drying, Good Non-Yellowing Properties, Low Fume, Cleanable
Chemical Family:
Aliphatics, Polyurethanes (PU)
Classic satin armor 2k aliphatic-polyurethane sealer is a clear, 2-part component, voc < 19/1 63% solids, waterborne, special blend sealer that is designed to be used over all of our stains, as well as polymer modified cementitious toppings, masonry, concrete and waterborne colorants. May be used for exterior & interior. Satin armor 2k provides uv stability and will not yellow.
DOERKEN
Delta® Fenster-Compact 6.05
Applications:
Waterproofing & Weatherproofing, Glazing & Window Elements, Wood Coatings & Finishes
Product Families:
Stains & Varnishes, Paints & Coatings
Chemical Family:
Acrylics & Acrylates
Delta® Fenster-Compact 6.05 is a water-thinnable, transparent, film-forming wood stain based on acrylate dispersion, fungicide-free, in-can preserved.
Super-Tek Products
Super-Tek Products Super - Tek Grout Stain
Ready to Use Product Type:
Stains, Waterborne Coating, Sealer, Adhesive, Latex
Compatible Substrates & Surfaces:
Tile
Features:
Excellent Dirt Pick-up Resistance, Good Sagging Resistance, Stain Resistant, Odorless, Abrasion Resistant, Water Resistant, Wear Resistant, High Performance
Chemical Family:
Acrylics & Acrylates
Super-Tek Products Super - Tek Grout Stain is a waterbased acrylic coating designed for restoring or changing the color of existing grout joints. It also seals and protects joints from dirt, stains, wear, and abrasion.
Classic Coatings Systems
Classic Coatings Systems Polyurethane Acrylic Wet-Look High Gloss Sealer
Ready-to-Use Product Type:
Waterborne Coating, Sealer, Stains, 1K (1 component) Coating
Compatible Substrates & Surfaces:
Concrete, Masonry
Features:
Low VOC, Water Resistant, Non Corrosive, Slip, High Durability, Excellent Hot Tire Pickup Resistance, Excellent UV Stability, Chemical Resistant, Low Odor, Good Adhesion, Cost Effective, Acid Resistant, Fast Drying, Good Non-Yellowing Properties, High Gloss, Cleanable, Enhanced Film Water Repellency, Oil Resistant
Application Method:
Roller
Chemical Family:
Polyurethanes (PU), Aliphatics
Classic Polyurethane/Acrylic Wet-Look Sealer is a clear, single component, low VOC, high solids, waterborne, special blend sealer that is designed to be used over all of our stains, polymer-modified cementitious toppings, concrete, waterborne colorants, masonry, and sealers. It may be used for exterior and interior applications in a wide range of climates. Classic Polyurethane Acrylic Sealer acts as a UV stabilizer and will not yellow.
Dukepolytech Corporation
DuroAcro® DP249
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
Ready to Use Product Type:
Stains, Primer
DuroAcro® DP249 is a ethylene Tertiary Carbonate or Vinyl Acetate Copolymer type.
UC Coatings
Fence Guard™ Stain Concentrate Western Redwood
Ready to Use Product Type:
Stains
Compatible Substrates & Surfaces:
Wood
Application Method:
Spray, Roller, Brush
Fence Guard™ Stain Concentrate Western Redwood is the leader in wood protection and the makers of seal-once and anchorseal wood protection products. Fence Guard stain concentrate is available in four popular semi-transparent colors: Espresso, Coco Brown, Western Redwood, and Sierra Cedar. This is a water-based alkyd formula which provides penetrating oil finish but with easy water clean-up and ultra-low VOC. Fence Guard dilutes with 2 parts water to 1 part concentrate to produce a cost effective, high-quality penetrating stain for wood fences of all types. Fence Guard offers superior protection against the elements, with fade resistant high quality pigments and long-lasting water repellency.
Tambour
Tambour Solvent based Varnit 485-100 clear glossy
Applications:
Waterproofing & Weatherproofing, Fence, Decks & Rails, Furniture
Product Families:
Stains & Varnishes, Paints & Coatings
Tambour Solvent based Varnit 485-100 clear glossy is Highly durable solvent based wood stain in various colors. For interior and exterior use.
UC Coatings
Fence Guard™ Stain Concentrate Coco Brown
Ready to Use Product Type:
Stains
Compatible Substrates & Surfaces:
Wood
Application Method:
Spray, Roller, Brush
Fence Guard™ Stain Concentrate Coco Brown is the leader in wood protection and the makers of seal-once and anchorseal wood protection products. Fence Guard stain concentrate is available in four popular semi-transparent colors: Espresso, Coco Brown, Western Redwood, and Sierra Cedar. This is a water-based alkyd formula which provides penetrating oil finish but with easy water clean-up and ultra-low VOC. Fence Guard dilutes with 2 parts water to 1 part concentrate to produce a cost effective, high-quality penetrating stain for wood fences of all types. Fence Guard offers superior protection against the elements, with fade resistant high quality pigments and long-lasting water repellency.
Classic Coatings Systems
Classic Coatings Systems Invisible Shield 2000
Ready-to-Use Product Type:
Stains
Features:
Good Penetration, High Durability, Excellent Hot Tire Pickup Resistance, UV Stabilized, Good Adhesion, Low Odor, Cost Effective, Fast Drying, Abrasion Resistant, Low Fume
Chemical Family:
Silicates
Сlassic Coating's Invisible Shield is a clear penetrating sealer & enhancer, single component low VOC, waterborne Sodium Methyl silicate sealer designed to be used over Classic Acid stains, pavers, concrete, stucco, granite, masonry, stone, brick, Spanish tile and some natural stone, provided the surface is properly prepared.
Classic Coatings Systems
Classic Coatings Systems Quick-Seal Wet Look Acrylic Sealer
Ready-to-Use Product Type:
Sealer, Stains, 1K (1 component) Coating, Waterborne Coating
Compatible Substrates & Surfaces:
Masonry, Concrete
Features:
Good Adhesion, Cost Effective, Fast Drying, Good Non-Yellowing Properties, Cleanable, High Gloss, Low VOC, Water Resistant, High Durability, UV Stabilized
Chemical Family:
Acrylics & Acrylates
Classic Quick Seal Wet Look is a clear, single component sealer that is designed to be used over all Classic Stains, polymer modified cement toppings, waterborne colorants, concrete, masonry, pavers, natural flagstone, and brick. Quick Seal is a waterborne acrylic with low VOC and high solids. May be used for interior or exterior applications in a wide range of climates.
Westcoat
Westcoat SC-35 Water-Based Stain
Ready to Use Product Type:
Stains, Waterborne Coating
Compatible Substrates & Surfaces:
Concrete
Features:
Low Gloss, Durable, Low Odor, Water-based
Application Method:
Spray, Broom, Brush
Westcoat SC-35 Water-Based Stain is a water-based color stain product. It is an easy one-step way to stain safely. Unlike acid stains, there is no need for rinsing or neutralizing and there are no caustic ingredients. It is available in 13 standard colors from natural earth tones to vibrant reds and blues.
Westcoat
Westcoat SC-36 Fast Stain
Ready to Use Product Type:
Solventborne Coating, Stains
Compatible Substrates & Surfaces:
Concrete
Features:
Good Penetration, Fast Drying, Solvent-Based
Application Method:
Spray
Westcoat SC-36 Fast Stain is a solvent soluble, penetrating, fast drying, drop in powder, dye stain. When it is used with acetone, this dye dries to the touch in just seconds. It produces colors from earth tones to vibrant colors on concrete and cementitious overlays.
Dukepolytech Corporation
DuroAcro® DP242
Chemical Family:
Styrenics, Styrene Copolymers
Ready to Use Product Type:
Stains, Sealer, Primer
Compatible Substrates & Surfaces:
Wood
DuroAcro® DP242 is a Styrene polymer type.
UC Coatings
Fence Guard™ Stain Concentrate Expresso
Ready to Use Product Type:
Stains
Compatible Substrates & Surfaces:
Wood
Application Method:
Spray, Roller, Brush
Fence Guard™ Stain Concentrate Expresso is the leader in wood protection and the makers of seal-once and anchorseal wood protection products. Fence Guard stain concentrate is available in four popular semi-transparent colors: Espresso, Coco Brown, Western Redwood, and Sierra Cedar. This is a water-based alkyd formula which provides penetrating oil finish but with easy water clean-up and ultra-low VOC. Fence Guard dilutes with 2 parts water to 1 part concentrate to produce a cost effective, high-quality penetrating stain for wood fences of all types. Fence Guard offers superior protection against the elements, with fade resistant high quality pigments and long-lasting water repellency.
Classic Coatings Systems
Classic Coatings Systems FX Nano Semi-Transparent Decorative Stain
Ready-to-Use Product Type:
Waterborne Coating, Stains
Features:
UV Stabilized, Cost Effective, Good Penetration, Anti-Wear Properties
Classic FX Nano Semi-Transparent Water Base Stain is a great alternative to acid staining. Since no chemical reaction is taking place, there is no extended waiting time color penetration and no need to neutralize. The penetrative reaction of the stain preserves and protects against wear and exposure when sealed. Multiple colors can be used in order to create unique looks.
Classic Coatings Systems
Classic Coatings Systems Pro-Seal 2000 Wet Look High Gloss Lacquer Sealer
Ready-to-Use Product Type:
Lacquers, Sealer, Stains, 1K (1 component) Coating, Waterborne Coating
Compatible Substrates & Surfaces:
Concrete, Masonry
Features:
High Durability, Excellent Hot Tire Pickup Resistance, UV Stabilized, Good Adhesion, Cost Effective, Fast Drying, Good Non-Yellowing Properties, High Gloss, Cleanable, Enhanced Film Water Repellency, Low VOC, Water Resistant, Good Penetration
Chemical Family:
Acrylics & Acrylates
Classic Pro-Seal 2000 is a high gloss, low VOC, single component, high solids, solvent (acetone) base sealer that is designed to be used over our acid stain, water based stains, polymer modified cementitious toppings, concrete, waterborne colorants, masonry, stone, pavers, and brick. It may be used for exterior applications in a wide range of climates. Pro-Seal 2000 Wet Look has excellent UV stability and will not yellow.
Classic Coatings Systems
Classic Coatings Systems Simple Stain
Ready-to-Use Product Type:
Waterborne Coating, Stains
Compatible Substrates & Surfaces:
Concrete, Masonry
Features:
Fast Cure, Good Penetration, Excellent Aesthetics, Anti-Wear Properties, UV Stabilized, Good Surface Finish
Classic Simple Stain is a great alternative to acid staining. Since no chemical reaction is taking place, there is no extended waiting time for color penetration with no need to neutralize. The penetrative reaction of the stain protects and preserves the effect against wear and exposure when sealed. Multiple colors can be used for more interesting images.
UC Coatings
Fence Guard™ Stain Concentrate Sierra Cedar
Ready to Use Product Type:
Stains
Compatible Substrates & Surfaces:
Wood
Application Method:
Spray, Roller, Brush
Fence Guard™ Stain Concentrate Sierra Cedar is the leader in wood protection and the makers of seal-once and anchorseal wood protection products. Fence Guard stain concentrate is available in four popular semi-transparent colors: Espresso, Coco Brown, Western Redwood, and Sierra Cedar. This is a water-based alkyd formula which provides penetrating oil finish but with easy water clean-up and ultra-low VOC. Fence Guard dilutes with 2 parts water to 1 part concentrate to produce a cost effective, high-quality penetrating stain for wood fences of all types. Fence Guard offers superior protection against the elements, with fade resistant high quality pigments and long-lasting water repellency.
Eco Chemical
Eco Chemical™ True Blue Stain Concentrate
Ready to Use Product Type:
Stains
Compatible Substrates & Surfaces:
Wood, Concrete
Features:
Excellent UV Stability, Low Odor, Good Color Stability
Eco Chemical™ True Blue Stain Concentrate is designed for safe, easy handling. Delivers consistent, dependable performance in the treating environment. It blends efficiently and effectively with your borate treating chemistry and provides a high-performance blue tint for finished products.
Classic Coatings Systems
Classic Coatings Systems FX2 Armor Nano Industrial Grade Stain
Ready-to-Use Product Type:
Stains, Waterborne Coating
Features:
High Durability, UV Stabilized, Excellent Hot Tire Pickup Resistance, Crack Resistant, Good Adhesion, Cost Effective, Fast Drying, Good Non-Yellowing Properties, Low Fume, Heat Resistance, Good Penetration
Chemical Family:
Blends & Combinations, Acrylics & Acrylates
Classic Coatings FX2 Armor Nano Industrial Grade is a single component acrylic polymer blend penetrating water base stain. FX2 provides excellent penetration, UV stability and it won't crack, peel or yellow. It can be applied over cementitious toppings, concrete, masonry, pavers, drive ways and polished concrete surfaces up to 400.
Classic Coatings Systems
Classic Coatings Systems Matte Armor 2K Sealer
Ready-to-Use Product Type:
Sealer, Stains, 2K (2 component) Coating, Waterborne Coating
Compatible Substrates & Surfaces:
Masonry, Concrete
Features:
Low Odor, Matte Finish, Enhanced Film Water Repellency, Oil Resistant, Water Resistant, Excellent Hot Tire Pickup Resistance, Chemical Resistant, Good Adhesion, Cost Effective, Acid Resistant, Fast Drying, Good Non-Yellowing Properties, Low Fume, Cleanable, Low VOC, Non Corrosive, Slip, Good Penetration, High Durability, UV Stabilized
Application Method:
Roller
Chemical Family:
Polyurethanes (PU), Aliphatics
Classic Satin Armor 2K Aliphatic-Polyurethane Sealer is a clear, 2-part component, voc< 19/1 63% solids, waterborne, special blend sealer that is designed to be used over all of our stains, as well as polymer modified cementitious toppings, masonry, concrete and waterborne colorants. May be used for exterior & interior. Satin Armor 2k provides UV stability and will not yellow.