Products in Paints & Coatings: Bearings

WearMaster® KG 453 is the ideal grease for complete corrosion control in areas of high salt and chemical contamination. The high drop point and good E.P. characteristics also make this a high performance multi-purpose grease.

Clarishield® Oil-Based Gloss Clear Sealer is an exterior waterproofing sealer that adds gloss and durability to both vertical and horizontal brick, stone, masonry and mortar- or epoxy-set natural stone. It can also be used as a sealer on flagstone, brick or other cementitious materials. It is suitable for use on traffic-bearing surfaces. It is designed for use over bare concrete or previously stained concrete. The non-yellowing clear surface protects against UV rays, water seepage and common chemicals. ClariShield® Oil-Based Gloss is 23% Solids content. H&C® ClariShield® Oil-Based Gloss Finish Clear Concrete Sealer enriches color and appearance. This premium oilbased formula adds depth of color with a thin protective film.

TriboShield® TS225 is based on a nanostructured thermoset polymer designed for low friction and high wear resistance at low to medium loads in dry or lubricated conditions. TS225 is part of the standard ® TriboShield product range.

P51+™ is a diamond like carbon based proprietary coating.

Tech Line Coatings TLML Dry Film Lubricant is a thermally cured Dry Film Lubricant. TLML has been designed to provide high pressure lubrication to surfaces subject to sliding, flexing, rotating or oscillating motion. TLML makes use of several design characteristics in managing friction. The coating applies in a thin film that is based on a resin system that allows the coating to be burnished to a film less than .0003” in thickness, allowing extremely tight clearances to be utilized. The coating may be pre-burnished prior to installation/assembly of a part or will burnish during operation. The coating is also designed to aid in the more even transfer of heat, reducing hot spots. This is particularly beneficial in parts that flex such as a spring. The low 300°F cure temperature allows for the coating to be used on a variety of substrates.

Integrated Protective Coatings System 1A Zinc Phosphate is designed to improve corrosion protection and friction properties of sliding components.

Duralar® WearGuard has a metal component that provides toughness, the diamond component provides exceptional wear resistance, and the combination delivers extraordinary overall performance. These Duralar coatings can be significantly thicker than conventional coatings, and they contain molecular diamond structures within the matrix to create an exceptionally durable material for numerous applications.

TriboShield® TS651 is based on high-performance thermoplastics specifically designed for constant low friction from low to moderately high loads in dry or lubricated conditions. Highly suitable for high-frequency / low amplitude (HFLA) applications, particularly in dry conditions. TS651 is part of the standard ® TriboShield product range.

TriboShield® TS161 is an engineering thermoplastic based composite coating composed of a primer and a top coat. Specifically designed for low friction at low loading conditions, it presents excellent wear resistance as one of its standout features. TS161 ® is part of the standard TriboShield product range.

Tech Line Coatings C-Lube Ceramic Dry Film Lubricant is a thermally cured Dry Film Lubricant. C-Lube has been designed to provide high pressure lubrication to surfaces subject to sliding, rotating or oscillating motion. C-Lube makes use of several design characteristics in managing friction. It applies in a thin film that is based on a ceramic metallic resin system that allows the coating to be burnished to a film less than .0001” in thickness, allowing extremely tight clearances to be utilized. C-Lube may be pre-burnished prior to installation/assembly of a part or will burnish during operation. The coating is also designed to aid in the more even transfer of heat, reducing hot spots. The low 350°F cure temperature allows for the coating to be used on a variety of substrates. C-Lube may be used on both wet and non-wetted surfaces.

TriboShield® TS421 is based on engineering thermoplastics, specifically designed for extremely low friction in lubricated conditions under low loads but presenting good characteristics in dry low load conditions as well. This system comprises a primer layer and an active hybrid top-coat. TS421 is part of the standard ® TriboShield product range.

ClariShield® Solvent-Based Natural Look Clear Sealer provides a low-sheen finish that adds depth of color and enhances the appearance of concrete and pavers.

AMS Coatings Tungsten - AMS 2530 is a thin-film lubricant with impinged tungsten disulfide coatings. The United States Department of Defense invented molecularly bonded tungsten disulfide lubricants to prevent metal galling and seizure. Thin film Tungsten Disulfide coatings have proven to be effective in a wide range of applications over time, including motor parts, pump parts, vanes, pins, rods, bearings, slides, cams, bushings, sprockets, gears, dies, drive train parts, injection molds, and saw blades. Once the coating is applied, there is very little dimensional change, so part dimensions do not need to be re-engineered. Thin film Tungsten Disulfide coatings, when combined with conventional lubricants, can significantly improve overall performance and prevent overheating and other frictional issues.

Master STAGES™ RPO 6BF is a barium-free, nonstaining, water displacing, thin-film corrosion inhibitor or rust preventative which can be used on a variety of metals. RPO 6BF provides indoor corrosion inhibition, excellent protection for bearings and other precision parts, inprocess parts in storage, as well as parts in transit.

Belzona 2131 FN10181 is a two component, durable and abrasion resistant, fluid grade elastomeric system designed for coating, surfacing, casting and tooling applications.

TriboShield® TS741 is based on high-performance thermoplastics specifically developed for demanding and heavy duty applications. Very high load bearing capacity and low friction at moderate to high loads are some of its standout features. TS741 is part of the standard ® TriboShield product range.

P50™ is a metalized diamond like carbon based proprietary coating.