Products in Fluids & Lubricants: Electrical Components

Staticide® 8608 PL40 Premium Penetrating Lubricant is an aggressive degreaser and lubricant with peak performance. It penetrates deeply to displace moisture and inhibit corrosion on electronic and electrical components. In addition to being suitable for loosening frozen moving parts such as hinges, joints, and solenoids, this dynamic universal degreaser offers long-lasting protection against metal oxidation. The lubricating properties of this restorative formula will reduce friction between mechanical parts, making it ideal for returning unusable metal parts to functionality. This product is even safe to spray around plastics.

The 403A Super Cold™ 134 is a pure, non-flammable cold spray that is used primarily for diagnosing thermally intermittent problems with electronic devices. The cold spray contains pure 1,1,1,2-tetrafluoroethane (HFC 134a).

403C Super Cold™ HFO-1234ZE is a non-flammable cold spray that is used primarily for diagnosing thermally intermittent problems with electronic devices. It is also useful for protecting heat sensitive components during soldering, quickly cooling solder joints, and it can also be used to quickly remove gum and other adhesives from a variety of surfaces.

Staticide® 8699 Heat Sink Grease is used to maximize heat transfer and dissipation from electronic and electrical components. This silicone-based material is thickened with a heat-conductive metal oxide to maintain a positive heat sink seal. With its excellent conductivity, it is an effective thermal coupler for any heat sink surface. Unlike some heat sink formulas, Staticide® 8699 Heat Sink Grease will not separate. The high dielectric strength and low bleed properties make it ideal for various applications, including engineering and design work. It is a one-component, ready-to-use product that does not dry out, harden, or melt.

STG-41 is a non-reactive, Silicone, Thermally Conductive Grease with a high thermal conductivity and low thermal resistance with a soft, non-flowable consistency. This product is formulated with specialty binding agents to achieve lowest amount of bleed and evaporations. It is designed for applications where a silicone thermal interface material is required and where the device may later need to be easily removed from the heat sink. This compound is ideally suited for use in thin cross-sectional thicknesses down to ≤ 1 mil.

STG-40 is a non-reactive, Silicone, Thermally Conductive Grease with a high thermal conductivity and low thermal resistance with a soft, non-flowable consistency. This product is formulated with specialty binding agents to achieve lowest amount of bleed and evaporations. It is designed for applications where a silicone thermal interface material is required and where the device may later need to be easily removed from the heat sink. This compound is ideally suited for use in thin cross-sectional thicknesses down to ≤1 mil.

8463 is a silver-filled electrically conductive grease. It greatly improves electrical and thermal connections under screw-type pressure. It lubricates, reduces contact resistance, repels moisture, inhibits corrosion, and prevents static build-up. Use 8463 when you want a lubricating grease that provides superior electrical contact and environmental protection. It is excellent for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors and potentiometers.

Whitlam Multi-Purpose Silicone Grease is a silicone based, moisture resistant, non-curing paste which retains its consistency and properties over a temperature range of -70°F (-56°C) to 400°F (204°C). Designed for use as a waterproof lubricant on faucets valve stems cartridges and is safe for nitrite/rubber O-rings. Contains high raw silicone content making it better for long term lubricant hold & helps hard-turning faucets work smoothly. The grease is water resistant and oxidation resistant. Whitlam Multi-Purpose Silicone Grease helps reduce friction and provides long- lasting lubrication. This product is compatible with most all rubbers and plastics.

MDS Lubricant Suppliers FF103B - Multilube Bulk is a highly effective blend of penetrating and lubricating fluids, water dispersing agents and corrosion inhibitors. Specifically developed to lubricate and release parts which are corroded and/or seized. Instantly displaces all water from damp or wet components. Penetrates deeply to prevent moisture traps. Leaves a protective film to waterproof and guard against corrosion. Lubricates - increases efficiency of working parts. FF103B Multi-Lube may be used as a very effective solvent cleaner/ degreaser and to break down residual deposits of old lubricants. Use on all ignition systems, electrical, electronic and engineering components including – electric motors, generators, relays, coils, switches, terminals, telephonic and general communication equipment, tools and machinery, motor cars, general transport, boats etc. highly recommended for Off shore oil and marine applications. This product contains no nut derived, genetically modified, soya, animal derived or vegetable derived ingredients.

Clearco Products Silicone Grease NLGI#1 O‐Ring & Valve Lubricant is an NLGI #1(lowest stiffness) Silicone Grease, formulated with Polydimethylsiloxane and inert silica filler. It is used in a variety of applications that require: wide range of thermal stability, high dielectric strength, electrical insulation, inertness to rubber and plastic surfaces, and insulation against corrosion and moisture.

Novagard® G641 is a heat transfer compound that is formulated with select polydimethyl siloxane fluids in combination with metallic oxide fillers to provide superior thermal conductivity.

AOS® 340 LR 52054(lowest resistance) is a non-silicone thermal grease with the current lowest thermal resistance on the market (for thin bond line applications*). It is also extremely durable and will not pump-out making it ideal for applications requiring extended life and no degradation.

AOS® Electrically Conductive Grease 57000 is a silver-filled, Non-Silicone-based, chemically inert; heat sink compound. This advanced grease offers premium electrical and thermal conductivity.

E-Tec 522-B is a dark water-based emulsion that protects all types of finishing. It dries to a satiny film in about 15 minutes.

Novagard® G635 is an amorphous fumed silica thickened, methyl-diphenyl polysiloxane based compound. The very broad operating temperature range typical of phenyl-modified silicone fluids characterizes Novagard® G635. The product retains its superior lubricity and dielectric character in temperature extremes from as low as –57°C to as high as 200°C.

Cor-Ban® D-5015NS is a light lubricant used for avionics, electronics.

MDS Lubricant Suppliers FF103 - Multi-Lube Aerosol is a highly effective blend of penetrating and lubricating fluids, water dispersing agents and corrosion inhibitors. Specifically developed to lubricate and release parts which are corroded and/or seized. Instantly displaces all water from damp or wet components. Penetrates deeply to prevent moisture traps. Leaves a protective film to waterproof and guard against Corrosion. Lubricates- increases efficiency of working parts. FF103 Multi-Lube may be used as a very effective solvent cleaner/degreaser and to break down residual deposits of old lubricants. Use on all ignition systems, electrical, electronic and engineering components including - electric motors, generators, relays, coils, Switches, terminals, telephonic and general communication equipment, tools and machinery, motor cars, general transport boats etc. highly recommended for Off shore oil and marine applications. This product contains no nut derived, genetically modified, soya, animal derived or vegetable derived ingredients.

AOS® ZnO Free Thermal Grease 52056 is a synthetic-based thermal grease used to insure quick, efficient heat transfer and dissipation. The product exhibits very high thixotropy yet spreads easily under low shear. This AOS compound increases slightly in viscosity as it is heated, yet still exhibits excellent heat transfer. 52056 was developed by AOS in response for a product that will exhibit very high flow initially and can therefore be pumped under relatively low shear. The material appears compatible with most electronic materials. Keep the container closed until using as the material should not be left exposed to the atmosphere until used.

Novagard® G665 is a soft, grease-like material formulated with select polydimethyl siloxane fluids in combination with inert, amorphous silica fillers. Novagard® G665 is an extremely soft, non-melting silicone compound with good resistance to water and most chemicals.

Moist-Out MO-10™ is a light spray lubricant, demoisturant and penetrant formulated into one superior product. It has excellent penetrating abilities that drive out moisture for quick, thorough moisture displacement, provides longlasting lubrication, and protects from rust and corrosion.

Cor-Ban® D-5026NS is a water displacing, thin film, corrosion preventive used for avionics and cables.

Novagard® G644 is a heat transfer compound that is formulated with select polydimethyl siloxane fluids in combination with metallic oxide fillers to provide superior thermal conductivity.

AOS® Electrically Conductive Grease 57001 is a Non-Silicone-based, chemically inert heat sink compound that is thermally stable. This advanced grease offers premium electrical and thermal conductivity.

E-Tec 522 is a one-of-a-kind, water-based wax emulsion with excellent adhesion and durability on a variety of substrates. It dries to a satiny film in about 15 minutes without losing its wax characteristics or lubricity. It can be used on lightly oiled surfaces and dries to a tack-free finish. This product provides a temporary protective coating to aid in the prevention of corrosion during part storage and shipment.

Delta Foremost® 602-ES DRI 'N LUBE is a unique blend of solvents, dispersants and penetrating ingredients. Dri ’N Lube is composed of rust-preventative film-forming materials with excellent adhesion to metal surfaces. The rust preventative film is almost invisible. Buildup is so light that it can be applied periodically to protect the finished steel surface of machinery in service. Distinctive characteristics include lubricating and water displacing properties.

Versilube® G351 is a soap-thickened, dimethyl-diphenyl polysiloxane based grease. Versilube® G351 resists oxidation and degradation even under extreme conditions.