Products in Adhesives & Sealants: Silicon-based Compounds

RTV106 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

RTV108 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

RTV162 adhesive sealants from Momentive Performance Materials are one-component, ready-to-use electronic grade silicone sealants. They cure to a tough, resilient silicone rubber on exposure to atmospheric moisture at room temperature. These electronic-grade silicone adhesive sealants differ somewhat in physical properties including consistency.

SilCool TIA241GF – Liquid Silicone Thermal Pad TIA241GF is a two-component, flame retardant, thermally conductive silicone gap filler. It is a smooth, non-sagging paste that easily conforms to the complex shapes of any interface design. The cured product creates a thermal path that efficiently dissipates heat from electronic devices. It retains its softness after cure which maximizes stress relief during thermal cycling. This thermal gap filler can be used as a liquid alternative for prefabricated solid thermal pads. If lower viscosity is required, use TIA225GF

RTV103 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

RTV167 adhesive sealants from Momentive Performance Materials are one-component, ready-to-use electronic grade silicone sealants. They cure to a tough, resilient silicone rubber on exposure to atmospheric moisture at room temperature. These electronic-grade silicone adhesive sealants differ somewhat in physical properties including consistency.

RTV102 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure. Since all these sealants utilize a moisture cure system, they must not be used in thicknesses of greater than 6mm (1/4 in.). Where section depths exceed 6mm (1/4 in.), Momentive Performance Materials one component, addition cure or two-component silicone rubber compounds are recommended.

TIA225GF - Silicone Thermal Gap Filler TIA225GF is a two-component, flame retardant, thermally conductive silicone gap filler. It is a smooth, non-sagging paste that easily conforms to the complex shapes of any interface design. The cured product creates a thermal path that efficiently dissipates heat from electronic devices. It retains its softness after cure which maximizes stress relief during thermal cycling. This thermal gap filler can be used as a liquid alternative for prefabricated solid thermal pads. If higher thermal conductivity is desired, use SilCool TIA241GF.

Chemitac 6 is a thermoreactive adhesive for bonding AEM and FKM to rigid substrates. Chemitac 6 is a heavy metal free product.

Green Belting 179-20S has superior adhesion to itself to withstand the extreme conditions of metalizing and plasma spray operations. This high temperature, abrasion resistant multi-ply tape is made with a silicone/glass layer laminated to a heavy gage aluminum foil. The aluminum layer enhances conformability and produces clean edge lines.

Green Belting 162-7S is ideal as a underwrap in demanding coating applications, this high temperature fiberglass tape has silicone adhesive on both sides. The tape is removed cleanly after use and does not leave any sticky residue.

Silicone Solutions SS-18 is a fast curing silicone RTV adhesive developed for applications requiring fast deep section cures as well as excellent adhesion. SS-18 is a 2-part, 1:1 mix ratio silicone that when ixed and applied to the substrate, allows handling within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. SS-18 works well in static mix dispensing equipment.

Green Belting 179-25S has superior adhesion to itself to withstand the extreme conditions of metalizing and plasma spray operations. This high temperature, abrasion resistant multi-ply tape is made with a silicone/glass layer laminated to a heavy gage aluminum foil. The aluminum layer enhances conformability and produces clean edge lines.

Green Belting 170-20S YL is a standard thermal spray masking tape withstands grit blast and thermal spray, and releases cleanly from metal surfaces. It offers double-layered protection for added strength and resilience.

Green Belting 170-10S YL is standard thermal spray masking tape withstands grit blast and thermal spray, and releases cleanly from metal surfaces. It offers double-layered protection for added strength and resilience.

Green Belting 170-10S Red is well suited for Plasma Spray coating and applications involving higher temperatures, this tape resists burning and scorching while leaving clean coating lines and no adhesive residue.

Silicone Solutions SS-30 is a fast curing silicone RTV adhesive rubber developed for automotive gasketing applications requiring fast development of physical properties and fast unprimed adhesion. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. SS-30 is also designed for superior oil resistance.

Green Belting 170-10S Green has superior adhesion to itself to withstand the extreme conditions of metalizing and plasma spray operations. In most cases, just a single layer of 170-10S Green will withstand both the grit-blast and spray coating processes.

Silicone Solutions AA-3147G GRAY is a high strength, neutral curing silicone RTV adhesive rubber. This product was developed for applications requiring fast development of physical properties and fast unprimed adhesion. AA-3147 is a 1-part silicone that allows handling of the bonded assembly within one hour of application to the substrate. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. AA-3147 works well in manual and automatic dispensing equipment.

ALDOSEAL 399 is a high solid, low VOC, one-part silicone elastomeric flashing grade specifically designed for use in sealing roof penetrations, curbs, seams, flashing areas and any other roof top areas of possible water infiltration. It is also the sealant of choice for any roof system that has been previously coated with a silicone elastomeric coating. Once applied, this silicone flashing grade provides a durable, seamless and flexible system that resists lateral movement, shear and will allow for normal expansion and contraction. ALDOSEAL 399 provides greater waterproofing protection than similar flashing grade silicone sealants and offers increased resistance to moisture penetration.

Griffon SILICONE SANITARY S-200 is High quality acid-free neutral silicone sealant for acrylic bathtubs and synthetic shower enclosures. Impervious to mold, water resistant, permanently elastic and colourfast .

Green Belting 162-12S is ideal as a underwrap in demanding coating applications, this high temperature fiberglass tape has silicone adhesive on both sides. The tape is removed cleanly after use and does not leave any sticky residue.

Silicone Solutions SS-1004 is a high performance thermally conductive liquid gap filling material. It is formulated to develop a very soft, form in place elastomer ideal for coupling hot PC board components to heat sinks. It is supplied as a two part, 1:1 mix ratio silicone that when mixed, cures at room temperature, or when exposed to heat results in a cured elastomer in 5 minutes.

Green Belting 160-5S HT is constructed with an uncoated glass fabric and silicon adhesive, this tape is ideal for secondary masking. It is highly conformable and does not leave any adhesive residue during removal.

Silicone Solutions SS-154 is a UV dual cure neutral silicone RTV adhesive rubber developed for applications requiring fast UV cure. SS-154 is a 1-part silicone that when applied and cured, allows handling of the bonded assembly within seconds. A secondary moisture cure enables full curing in shadowed areas. SS-154 works well in manual and automatic dispensing equipment.

Green Belting 170-20S Green has superior adhesion to itself to withstand the extreme conditions of metalizing and plasma spray operations. In most cases, just a single layer of 170-10S Green will withstand both the grit-blast and spray coating processes. For more demanding jobs, 170-205 Green provides an extra layer of protection.

Green Belting 160-10S HT is constructed with an uncoated glass fabric and silicon adhesive, this tape is ideal for secondary masking. It is highly conformable and does not leave any adhesive residue during removal.

Silicone Solutions PSA-16 is a heat curing, high strength pressure sensitive adhesive developed for silicone rubber applications requiring a tough low durometer product. PSA-16 is a 2-part silicone that when heat cured, allows handling of the parts within minutes. PSA-16 works well in manual and automatic dispensing equipment.

Super-Tek Products Perfect Seal Caulk is an easy to use acrylic caulk formulated specifically to match all of Super-Tek's grout colors. Perfect for creating a professional designer look. For use around tubs, showers, counter tops, backsplashes, thresholds and windows. Non-Sag formula allows for use on vertical installations.

Green Belting 190-7S is made with aluminum foil and fiberglass cloth laminate, this specialized tape offers dual masking protection. It is highly conformable, releases cleanly from metal surfaces and leaves clean edge lines.

Silicone Solutions AA-106 is a fast curing, high strength acetoxy silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and excellent adhesion. AA-106 is a 1-part silicone that when applied to the substrate allows handling of the bondedassembly within minutes. AA-106 works well in manual and automatic dispensing equipment.

Griffon SILICONE SANITARY S-100 is High-quality, acid, permanently elastic, water resistant sanitary silicone sealant.

Silicone Solutions AA-3147 is a high strength, neutral curing silicone RTV adhesive rubber. This product was developed for applications requiring fast development of physical properties and fast unprimed adhesion. AA-3147 is a 1-part silicone that allows handling of the bonded assembly within one hour of application to the substrate. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. AA-3147 works well in manual and automatic dispensing equipment.

Silicone Solutions SS-155 is a UV dual cure neutral silicone RTV adhesive rubber developed for applications requiring fast UV cure. SS-155 is a 1-part silicone that when applied and cured, allows handling of the bonded assembly within seconds. A secondary moisture cure enables full curing in shadowed areas. SS-155 works well in manual and automatic dispensing equipment.

Green Belting 170-20S Red is well suited for Plasma Spray coating and applications involving higher temperatures, this tape resists burning and scorching while leaving clean coating lines and no adhesive residue.