Products in Adhesives & Sealants: Polyolefins

A slightly hazy PP film with a tight-release UV-cured silicone coating.

Avery Dennison™ Fas-Flex™ 8615M (#57709M) is a 15 mil (0.015") flexographic plate mounting tape designed for printing large text and lines, reverse text and solids.

Avery Dennison™ Fas-Flex™ 8615S (#57708S) is a 15 mil (0.015") flexographic plate mounting tape designed for printing large text and lines, reverse text and solids.

Flex Series™ MD15T High Adhesion has a medium density feature, recommended for use in combination type printing, where process and solid ink coverage are reproduced as one image. Flex Series™ MD15 High Adhesion is a double-sided poly foam with standard thickness.

Avery Dennison™ FM 2108 is a 130 mil double coated white polyethylene foam with a high shear rubber adhesive. It bonds to a wide variety of low surface energy materials and features high shear strength and the ability to fill gaps. It is commonly used in general industrial foam applications.

avenia B3706 is slight color fluctuations can occur in adhesives, depending on the raw materials and processes used. the first avenia hot-melt adhesive for the concrete industry. this low-odor hot-melt adhesive has very good oxidation stability in the melt. the avenia b63706 reliably bonds eps and all materials commonly used in the concrete industry, such as junction boxes. in practice with common separation agents, it proves its high adhesive power. in spite of the high adhesive strength, it can be removed from the pallet without leaving any residue. in this way, it achieves the desired balancing act in the manufacturing process.

3F North America PE Foam Tape One-Sided Self-Adhesive 30000 is a PE foam carrier in a variety of thicknesses and densities, standard coating with hot melt adhesive, very high initial and final adhesion, polyester stabilizing scrim embedded in pressure-sensitive adhesive.

Avery Dennison™ FM 2132 is a 36 mil double coated white polyethylene foam with a high shear rubber adhesive. It bonds to a wide variety of low surface energy materials and features high shear strength and the ability to fill gaps. It is commonly used in general industrial foam applications.

Flex Series™ MD20T High Adhesion has a medium density feature, recommended for use in combination type printing, where process and solid ink coverage are reproduced as one image. Flex Series™ MD20T High Adhesion is a double-sided poly foam with standard thickness.

Reynco 54-045 is a hot melt Polyolefin adhesive. This premium product is formulated for low noise, excellent green strength and bonds to specialty foams.

Glue Machinery Corporation GIA1094 is a light colored hot melt adhesive formulated to bond to a variety of substrates. Exhibits low odor and excellent heat stability with long open time.

Avery Dennison™ FM 2454 is a 35 mil double coated black polyethylene foam with a moisture resistant acrylic adhesive. It bonds very well to glass and ceramic, including in moist environments. It is commonly used in exterior automotive applications.

The HIRODINE 7505 are hot melt adhesive used as a sealing layer for easy peelable films. Being processed most commonly in an extrusion coating or cast film line, it offers low to high temperature seals and sealability to various substrates including PE, PP, PET, PS, metals, and papers. It is designed to provide both adhesive and cohesive peel seals. Besides easy peelable film applications, it is used for laminating or coating paper, paperboard, woven fabrics, and nonwoven fabrics. Some grades comply with Food and Drug Administration Regulations, European Union Directives, and other regulations.

Flex Series™ ML20 Ultra High Adhesion has a medium low density feature for use with primary image high line screen, in combination with fine dot and solid type flexographic printing. Flex Series™ ML20 Ultra High Adhesion is a double-sided poly foam with standard thickness.

Flex Series™ MD20 Platinum Medium Adhesion has a medium density feature, recommended for use in combination type printing, where process and solid ink coverage are reproduced as one image. Flex Series™ MD20 Platinum Medium Adhesion is a double-sided poly foam with standard thickness.

Glue Machinery Corporation CJA5015 is a hot metal adhesive with short setting time, extremely colorfast and excellent oxidation resistance.

Flex Series™ MH20 Ultra-High Adhesion has a medium high density feature for solid tone coverage, where primary image graphics are reproduced as solid coverage with minimal process enhancement. Flex Series™ MH20 Ultra-High Adhesion is a double-sided poly foam with standard thickness.

Glue Machinery Corporation GIA1060 is a hot melt adhesive that exhibits excellent tack with an extended open time. GIA1060 was formulated to adhere to a variety of difficult substrates at elevated temperatures. It is recommended for most foam to foam applications.

Flex Series™ ML15T High Adhesion has a medium low density feature for use with primary image high line screen, in combination with fine dot and solid type flexographic printing. Flex Series™ ML15 High Adhesion is a double-sided poly foam with standard thickness.

Winn & Coales International PE OUTERWRAP is a heavy duty polyethylene backing in the form of a roll, calendered with an adhesive. The tape is used as an Outer Wrap for the mechanical protection of VISCOTAQ products against soil stress, back fill procedures and other forms of mechanical impact. Moreover, it gives a continuous external pressure to the VISCOTAQ corrosion preventive inner material and forces this material, together with eventual soil stress, continuously to flow. VISCOTAQ PE Outer Wrap is produced from MDPE/HDPE and is wrapped with a 50% overlap onto the VISCOTAQ corrosion preventive coating. The material is applied onto the substrate by hand or by means of a tape wrap machine.

Reynco 52-901 is a hot melt Polyolefin adhesive. This product’s high heat resistance is designed for use in automotive interior applications.

Shurtape Technologies DF 132 is used for Vibration reduction, Gap filling and General purpose mounting.

Avery Dennison™ FM 2333 is a 36 mil double coated white polyethylene foam with a modified acrylic adhesive. It bonds well to low surface energy materials and has the ability to fill gaps. It is commonly used in general industrial foam applications.

Adhesive Films EAF-220 is used in wood, leather ,rubber, fiberglass, aluminum, copper and steel applications.

Avery Dennison™ FM 2316 is a 68 mil double coated white polyethylene foam with a modified acrylic adhesive. It bonds well to low surface energy materials and has the ability to fill gaps. It is commonly used in general industrial foam applications.

Adhesive Films EAF-210 is used in wood, rubber, fiberglass, aluminum, copper and steel applications.

Flex Series™ ML20T High Adhesion has a medium low density feature for use with primary image high line screen, in combination with fine dot and solid type flexographic printing. Flex Series™ ML20T High Adhesion is a double-sided poly foam with standard thickness.

Flex Series™ MD20 Ultra-High Adhesion has a medium density features, recommended for use in combination type printing, where process and solid ink coverage are reproduced as one image. Flex Series™ MD20 Ultra-High Adhesion is a double-sided poly foam with standard thickness.

Shurtape Technologies DF 164 is used for Vibration reduction, Gap filling and General purpose mounting.

avenia B61472.1 is slight color variations may occur with adhesives, depending on the raw materials and processes used. low-odor avenia hot-melt adhesive with medium setting time and very good oxidation stability in the melt, as well as good low-temperature flexibility. the avenia b61472.1 is suitable for painted and laminated surfaces, subject to individual testing. the raw materials used comply with fda guideline 175.105 for the outer packaging of food.

Flex Series™ MH20 Platinum Medium Adhesion has a medium high density feature for solid tone coverage, where primary image graphics are reproduced as solid coverage with minimal process enhancement. Flex Series™ MH20 Platinum Medium Adhesion is a double-sided poly foam with standard thickness.

Flex Series™ MH20T High Adhesion has a medium high density feature for solid tone coverage, where primary image graphics are reproduced as solid coverage with minimal process enhancement. Flex Series™ MH20T High Adhesion is a double-sided poly foam with standard thickness.

Avery Dennison™ FM 2116 is a 68 mil double coated white polyethylene foam with a high shear rubber adhesive. It bonds to a wide variety of low surface energy materials and features high shear strength and the ability to fill gaps. It is commonly used in general industrial foam applications.