Products in Screen Printing: Alkyds

BREMAPAL 3000 is applied in flexo, special and screen inks, lacquers, epoxy systems.

Tallicin® 1314 is recommended as a drop-in replacement for standard dispersants at 70% solids. Tallicin® 1314 is designed for use in a wide variety of alkyd, oleoresinous and other systems to improve the dispersing, wetting and deflocculation properties of the vehicle.

ADD-3772 is a silicone-free additive suitable for aqueous and non-aqueous systems. It is designed to reduce the surface tension of various resin systems at substrate interface, which will improve substrate wetting and leveling; and prevent formation of craters without stabilizing foam. ADD-3772 is suitable for coatings and printing inks.

BREMAPAL 3005 has a feature of higher melting point.

BREMAPAL 2025 is a combination resin for sheet fed-offset with very low varnish viscosity and excellent pigment wetting, hard resin for oil- and alkyd resin based lacquers and screen inks, also suitable for systems "free of aromatic" and pigment pastes. BREMAPAL 2025 a combination resin, very good wetting, extremely low viscous.

Powerful wetting agent, good synergy with Tallicin® 1555 polymeric dispersant. Salt of unsaturated polyamine amide and low MW acid functional polymer, 100% active. Mainly used when polar solvent systems are used. Compatible with alkyds and thermoplastic acrylics. Excellent wetting properties for high oil-absorbing pigments. Compatible in plasticizer-based systems.

ADD-2021 is a silicone-free defoamer with leveling properties for various solvent-based resin systems. ADD-2021 functions well during the application of paints and lacquers, and also prevents the entrapment of air during processing steps such as stirring and pumping. ADD-2021 can be used in coatings and printing inks.

BS-1C-0 is an organic derivative of a bentonite clay. This Rheology Modifier is designed for low to medium polarity organic solvent system, such as mineral oil, paraffin oil, toluene, xylene, 200# solvent oil.

BREMAPAL 3002 has features such as reduced AV, high resistance.

BREMAPAL 2035 is a combination resin for sheetfed-offset with very low varnish viscosity and excellent pigment wetting, hard resin for oil- and alkyd resin based lacquers and screen inks, also suitable for systems "free of aromatic" and pigment pastes. BREMAPAL 2035 a special, SI, good wetting, very low viscous.

At 100% active with a well-balanced surface-active capability, Teraflow® 1000 provides smoother films, allowing the application of thinner coatings, and contributes to substrate wetting, improvement of gloss, and recoat adhesion. Its novel pigment-affinic functionality, allows the formulator to optimize the dispersion of almost all pigments and extenders. It is soluble in ketones such as MEK and MIBK.

ADD-5765 is a wetting and dispersing additive for enhancing the dispersion of inorganic pigments and stabilizing the suspension of special effect pigments in solvent-based media. It is designed to prevent flooding and floating and hard sedimentation. ADD-5765 can be used in coatings and printing inks.

Tallicin® K-3 is a unique wetting and dispersing agent for both organic and inorganic pigments. Dispersant K-3 through it's well balanced surface active functionality optimizes the dispersion of almost all pigments and extenders, including such difficult to disperse pigments as phthalo blue,phthalo green and carbon black. Thus flocculation, flooding, floating and color development problems can be overcome through use of Tallicin K-3. Tallicin K-3 is a lower viscosity, lower solids version of Tallicin K-2 and is designed to replace standard dispersants.

ADD-5065 is a wetting and dispersing additive for enhancing the dispersion of inorganic pigments and stabilizing the suspension of special effect pigments in solvent-based media. It is designed to prevent flooding and floating and hard sedimentation. ADD-5065 can be used in coatings and printing inks.

ADD-3777 is a silicone-free additive having high molecular weight and very broad compatibility. It is designed to reduce the surface tension of various resin systems at substrate interface, which will improve substrate wetting and leveling and prevent formation of craters without stabilizing foam. The additive provides “long wave” leveling performance and increases gloss of the coating system and does not cause any inter-coat adhesion problems. It is highly effective in the transportation coatings when combined with the silicone-based additive ADD-3031. ADD-3777 is suitable for coatings and printing inks.

Tallicin® K-2 - An Excellent dispersant for both organic and inorganic pigments in non-polar solvent-based systems. Tallicin® K-2 enhances the acceptance of tint colors into a white base. Tallicin® K-2 is compatible with all oil length alkyds, acrylics, polyesters and urethanes. The FDA has sanctioned K-2 under paragraphs 175.300, Resinous and Polymer Coatings and 175.105, Adhesives. At 97% active, Dispersant K-2 contributes to improved pigment loading, faster grinding time and maximum color development. Used in combination with Tallicin 1550 and Tallicin 1555.

BREMAPAL 3007 has features such as , higher resistance, offset+security inks.