Products in Primers & Lacquers: Waterborne Adhesive

KaMin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. KaMin® 90 is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important.

CURING AGENT W3 is a liquid polyisocyanate, emulsifiable in water. Acrylic and PU dispersion polymers can be efficiently cross-linked with this product.

Fibrillated cellulose in water suspension. Valida S231C, 3% is derived from wood pulp that has been sourced from sustainably managed forests. The product is a multifunctional bio-based additive which can be widely used in waterborne coatings, Inks, adhesives to provide unique rheological and physical properties.

The presence of Deuteron VT 819 prevents the settling of pigments/extenders and the separation of the liquid phases during the storage in aqueous systems such as emulsion paints and plasters. The applicability of the paints will be improved. Deuteron VT 819 is compatible with most binders and thickeners which are customary in the paint industry.Deuteron VT 819 is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. The product has no tendency to form lumps. Solutions can be produced with a simple stirrer. The use of a high shear rate is not necessary. The product‘s easy solubility is only given when it is incorporated into systems with a pH-value ranging between neutral and alkaline.When the solution is prepared, its pH-value can be adjusted towards an acidic pH-value.Application Aqueous primers, emulsions paints, adhesives, dispersion plasters, printing inks, silicate paints, aqueous preparations of pigments and fillers. back

Winlex 4025 is a low softening point rosin ester with good stability and mild odor. It is easily emulsified in water by conventional means. The principal uses for this resin are in the formulation of oil varnish, lacquer, hot-melt, heat-sealing, and pressure-sensitive adhesives. It has a suitable FDA status for use in food packaging applications covered by 175.105.

TACKIFIER 71 is an acrylic aqueous dispersion. Tg = -46°C (approx).

CURING AGENT W3 DIL is a water dispersable polyisocyanate, NCO content is about 13%. Adhesive emulsions or solutions can be efficiently cross-linked with this product. The cured adhesive will have an increased resistance to heat, water, plasticizers and organic solvents.

Deuteron SR 28 is soluble in water and forms firm gels when used in small quantities. The extremely high thixotropy avoids a breakdown of the solution even in small quantities.Deuteron SR 28 requires no heat for mixing. It can be stirred into cold water or a liquid agent. Using a higher shearing force would lead to a shorter mixing time and a maximum exploitation of the product respectively. A higher shearing force speeds up the dissolving process and leads to a faster final viscosity and thixotropy.Application All aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. back

Fibrillated cellulose in water suspension. Valida S191C, 3% is derived from wood pulp that has been sourced from sustainable managed forests. The product is a multifunctional bio-based additive which can be widely used in waterborne coatings, Inks, adhesives to provide unique rheological and physical properties.

CURING AGENT W9 is a liquid polyisocyanate, emulsifiable in water. Acrylic and PU dispersion polymers can be efficiently cross-linked with this product. The product is diluted in an non-toxic solvent: 1,2-propylene glycol diacetate, CAS 623-84-7.

Aromatic thermoplastic polyurethane resin in dry granules.

In aqueous systems, such as emulsion paints and plasters, the use of Deuteron XG prevents a deposition of the pigments and extenders as well as a separation of the liquid phase during storage. The applicability of the paints is improved. Deuteron XG is compatible with most binders and thickeners which are customary in the paint industry.Deuteron XG is insoluble in most organic liquids. The product is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. Pre-wetting of Deuteron XG with glycols at a ratio of 1 : 1 accelerates the swelling- and dissolution process. Aqueous solutions of Deuteron XG show a high pseudoplasticity. High rate of shear lowers the viscosity. Reducing the shear rate increases viscosity again. Solutions of Deuteron XG are stable regarding the pH-value and temperature. There is almost no change in stability from pH 2 – 12. The temperature hardly has any influence on the viscosity of a preparation with Deuteron XG.Application All aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. back