Products in Packaging Coatings: Corrosion Inhibitor

Efka® MI 6613 is a corrosion inhibitor designed for use in primers and one-coat paints based on binders drying by oxidation. Its chemical composition passivates rust residues after mechanical pre-treatment of the substrate and eliminates residual moisture from the paint film through a capillary effect.

Inhibisil® 75 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

Inhibisil® 73 anti-corrosion pigment is a calcium oxide-containing synthetic amorphous silicon dioxide. It is designed for use where thin film anti-corrosive protection is needed. Its high calcium oxide content, ease of dispersion, and high Hegman value provide formulation flexibility and expanded process capability.

ASCOTRAN® H10 is a ready-to-use, liquid-form, anti flash-rust additive for waterborne coatings and galvanized steel substrates. It replaces mineral anticorrosive pigments and enhances their effectiveness. This product functions as a hydrophobic agent and increases the water resistance of dry films. It helps shield against corrosion in metal packaging.

ASCONIUM® 142DA can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 112 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 114 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 143 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCOTRAN® AL4 is a ready-to-use, VOC-free, liquid-form, anti flash-rust additive for any waterborne coating. It contains a hydrophobic agent that protects nearly dry films under severe ambient humidity conditions. Additionally, this product acts as a corrosion inhibitor for metal packaging protection.

ASCONIUM® 140 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCOTRAN® H14 is a ready-to-use, liquid-form, anti flash-rust additive for waterborne coatings. It functions as a hydrophobic agent, providing protection for the almost dry film in severe ambient humidity conditions. Additionally, it serves as a corrosion inhibitor for metal packaging protection.

ASCOTRAN® HPB is a ready-to-use, liquid-form flash rust inhibitor for waterborne coatings. It serves as a corrosion inhibitor for metal packaging protection, providing effective protection against flash rusting. This product can be used for waterborne neutral or alkaline paints or coatings and for professional and do-it-yourself applications.

ASCONIUM® 110 replaces or enhances the effectiveness of mineral anticorrosive pigments in aqueous and solventborne metal coatings. It is a hydrophobic agent that enhances the water resistance of dry films. For substrates made of galvanized steel, this product functions as an anti flash-rust additive. It is used as a corrosion inhibitor to protect metal packaging.

ASCONIUM® 130 is a liquid additive that improves the anti-corrosion and hydrophobic properties of both waterborne and solventborne metal coatings and enhances their adhesion to metal substrates. This product can be used alone or in combination with other anti-corrosion agents.

ASCOTRAN® H30 is a ready-to-use, liquid-form flash rust inhibitor for waterborne coatings. It serves as a corrosion inhibitor for metal packaging protection, providing effective protection against flash rusting. This product can be used for waterborne neutral or alkaline paints or coatings and for industrial, professional, and do-it-yourself applications.

ASCOTRAN® H18 is a ready-to-use, liquid-form, flash rust inhibitor for waterborne coatings. It serves as a corrosion inhibitor for metal packaging protection, providing effective protection against flash rusting. This product can be used for waterborne neutral or alkaline paints or coatings and for industrial, professional, and do-it-yourself applications.

ASCONIUM® 111 can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

ASCONIUM® 144DA can replace mineral anti-corrosion pigments or improve their performance in waterborne or solventborne metal coatings. It is a hydrophobic agent that improves the water resistance of dry films. This ASCONIUM® grade can be used as the sole anti-corrosion additive in coatings or in conjunction with other anti-corrosion pigments to improve their performance. As a liquid-type additive, it is easy to incorporate into coating formulations and will not reduce the gloss of the coating’s dry film.

DYTEK® BHMT HP (bis-hexamethylene triamine) is a high purity (>95%) triamine that is used in applications where purity is critical such as phosphonate scavenger and flocculant in oil & gas applications and as a hardener in epoxy coating and adhesive applications.

DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.

Novinox®PAS is a corrosion inhibiting pigment suitable for a wide range of applications. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. Novinox®PAS is suitable for a wide range of resins, both solvent and water based systems. Novinox®PAS is also an excellent alternative to Strontium chromate in coil coatings.

ASCONIUM® 144DA are organic liquid-type additives which can provide excellent long-term anticorrosion performance to pigmented or clear coatings. ASCONIUM® additives can be used in waterborne, as well as in solventborne coatings, either as single products or in combination with active pigments.

NiCHEM No. 3 Strontium Chromate is a corrosion inhibiting pigment for use in solvent and water based primer systems.

AB RUST® CH4 is designed to offer a flash-rust inhibitor. It is easy to use with the largest compatibility with the traditional binders used in water based coatings, very efficient at low dosage (< 0.5% in acrylic based formulations), and usable everywhere in the world thanks to the listing of its components in the world chemical inventories.

Zinchem Zinc Dust - type 1 Mining grade uses a uniquely designed Zinc Dust plant (world-wide patents pending) to produce a range of zinc dust with the highest purity and a finely, uniformly controlled particle size. The range complies with the ASTM D520 standard.The zinc dust is suitable for both organic and inorganic primers. The complete range ensures that the different dry film thickness for a range of zinc primers can be attained.

Delaphos® 2 is a pigment that will inhibit metal surface corrosion when properly incorporated in a wide variety of solvent based and water based paint primer systems.

Zinchem Zinc Dust - Micron 5 Type I uses a uniquely designed Zinc Dust plant (world-wide patents pending) to produce a range of zinc dust with the highest purity and a finely, uniformly controlled particle size. The range complies with the ASTM D520 standard.The zinc dust is suitable for both organic and inorganic primers. The complete range ensures that the different dry film thickness for a range of zinc primers can be attained.

NiCHEM No. 2 Basic Zinc Chromate is a corrosion inhibiting pigment with low solubility. It is especially suited for pretreatment primers (wash primers) and meets government specifications.

RAYBO 60 NoRust is a versatile and extremely effective flash rust inhibitor. It contains both vapor phase and contact corrosion inhibitors. As a result, RAYBO 60 prevents flash rusting in latex systems intended for direct to metal application. It also provides corrosion protection to unlined cans.

Novinox®PAZ is a corrosion inhibiting pigment suitable for a wide range of applications, from DIY to more demanding ones such as coil coatings. It is a stable and non-hygroscopic white powder with a low tinting strength, it is easily dispersed. Novinox®PAZ is suitable with a wide range of resins, both solvent and water based. Novinox®PAZ is also an excellent alternative to Strontium chromate in coil coatings.

PPG INHIBISIL® 75 anti-corrosion pigment is a calcium-oxide containing synthetic amorphous silicon dioxide designed for use where high film anti-corrosive protection is needed. High calcium oxide content, ease of dispersion and high Hegman value of 6.6 provides broad utility in many high film build anti-corrosion coatings.

KRONPHOS PZA is a zinc aluminum orthophosphate with improved phosphate loading. This leads to a controlled increase of inhibiting water soluble content and thus a better formation of protective layers on the metal surface

ASCONIUM® 114 are organic liquid-type additives which can provide excellent long-term anticorrosion performance to pigmented or clear coatings. ASCONIUM® additives can be used in waterborne, as well as in solventborne coatings, either as single products or in combination with active pigments.

Hybricor™ 204 - Hybrid Corrosion Inhibitor Pigment is an organic/inorganic hybrid corrosion inhibitor pigment, a proven effective replacement for Cr6+ in aerospace primer applications on aluminum and other non-ferrous substrates. The fine particle size of Hybricor™ 204 (7 Hegman) permits it to be easily incorporated into a coating using a high speed disperser. It is effective in primers, DTM and thin film (< 20 micron) applications. It does not affect pot life of 2K systems. Use level varies by intended application requirements.

raybo 85 Rustib is a cationic wetting agent. Because of its polarity, it is attracted to the metal surface forming a mono-molecular hydrophobic layer. This affinity increases adhesion and resistance to corrosion undercutting in coatings containing RAYBO 85. When added to coatings pigmented with transition metals containing pigments like phthalocyanine blue, insure that the surfactant demand has been met. If it has not, RAYBO 85 will be absorbed onto the pigment, reducing corrosion protection.

Waynflash™ 115 is a liquid flash rust inhibitor that is based on WPC’s nitrite free chemistry. It is a highly effective inhibitor against flash rusting on ferrous substrates (such as galvanized steel) during the aqueous paint phase. Typical use levels range from 0.25 – 1.0% based upon total formula weight. It can be used in any water based primer or DTM system. Waynflash™ 115 exhibits good paint stability and can be incorporated at any stage of paint manufacturing. It is both HAPS and APEO free.