Products in Wood Coatings & Finishes: Composites

AFCONA 2723 is a defoamer and air-releaser for unsaturated polyester, polyurethane, UV, and epoxy resin systems. It is recommended for thin-layer (gel coat), casting resins, and epoxy resin systems (e.g. floorings), as well as for room temperature curing of unsaturated polyesters used in glass fiber-reinforced systems.

Circa 1850® Stain'n Varnish is both a wood stain and a varnish finish in one. Its unique gel formulation maintains a consistent blend of stain and varnish throughout the can, so there's no mixing or stirring required. As a result, you ensure uniformity from the beginning of your project to the end. And because it's a gel, it goes on without runs, drips or brush marks. Stain'n Varnish can be used on virtually any surface including wood furniture, molding, paneling and floors, pottery, metal, plastic, fiberglass, masonite and composites (or composite doors). Stain'n Varnish comes in 22 pre-mixed colors (and about a million custom-tinted colors) to suit any decor.

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Keyland Polymer UV/EB resin UVP-1300 is an unsaturated polyester methacrylate resin that is cured with UV/EB energy. It is used in powder coatings, as an additive in ink, toner, and overlay varnish applications, and as an additive in 3D additive manufacturing applications.

Keyland Polymer UV/EB Resins UVE-5100 is an unsaturated epoxy acrylate resin for use in powder coatings, as an additive in ink, toner, and overlay varnish applications, and as an additive in 3D additive manufacturing applications.

GRANICOAT® Alicon is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

UC Coatings Stay Clean Moss & Algae Prevention Solution - Ready to Use contains a mold and algae inhibitor that protects the film it forms on substrates from microbes. Stay Clean’s water-based acrylic binder chemistry will adhere to most porous surfaces. It is delivered in concentrated form and is easy to dilute, mix, and apply. Stay Clean combines high performance, ease of use and consumer safety with the environmentally-friendly benefits common to water-based technologies.

FSS 45DC™ is a 100% solid, fast setting, plural component, polyurea elastomer and high performance coating. FSS 45DC is primarily designed for properly prepared concrete and masonry, due to it’s higher elongation and extended gel time, but will bond tenaciously to steel and other properly prepared substrates. FSS 45DC is an economical coatings solution for industrial applications requiring a resilient liner for waterproofing and/or abrasion resistance. FSS 45DC can be applied horizontally, vertically, and overhead, making it ideal for industrial applications with a variety of substrates, and complex geometries.

UC Coatings Stay Clean Moss & Algae Prevention Solution - Concentrate contains a mold and algae inhibitor that protects the film it forms on substrates from microbes. Stay Clean’s water-based acrylic binder chemistry will adhere to most porous surfaces. It is delivered in concentrated form and is easy to dilute, mix, and apply. Stay Clean combines high performance, ease of use and consumer safety with the environmentally-friendly benefits common to water-based technologies.

Defoamer and air-releaser for unsaturated polyester, Polyurethane, UV and epoxy resin systems

FlameOFF® Fire Barrier paint is a decorative, thin-film intumescent coating designed for fire protection of Gypsum/Sheetrock and Wood interior applications that require ASTM E119, ASTM E84, NFPA 251, ULC CAN S-101.

GRANICOAT® Alexander is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

Abocoat 8508-1 excels as a protective and decorative coating for concrete, metal, wood and composite surfaces, indoors and outdoors. It is applied to floors, walls, machinery and installations in industrial, marine, and architectural environments. It is an excellent base coat for polyurethane and other coatings.

GRANICOAT® Accent is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

GRANICOAT® Nury is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

PLT 2 is particularly indicated for the printing on ABS, rigid PVC, wood, paper and cardboard, as bicomponent ink also on pre-treated PE and PP, thermosetting plastics, metal, varnished surfaces, polyamide (PA).

Intumax LAY41 is a unique one component latex fire retardant - intumescent coating based on our proprietary non-halogenated phosphate technology. All of our phosphates are manufactured in house for our exclusive use. When exposed to heat and/or fire, INTUMAX®LAY41 forms a continuous, dense char foam that protects products from both heat and flame. Additionally, INTUMAX®LAY41 offers very low smoke generation during char formation. We have achieved an equivalent Class A flame spread rating in house. The active ingredients in INTUMAX® products are not soluble in water and will not leach out over time. INTUMAX®LAY41 is recommended for use as a coating for wood, composites, plastics or metals. The viscosity is easily reduced by the addition of water. Pigments, anti-settling agents, and other flame retardants may also be incorporated. INTUMAX®LAY41 can be brushed on, rolled on, or sprayed on. 2 coats are recommended at a minimum. Wait minimum 30 minutes between coats.

GRANICOAT® Spray Chip2 is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

GRANICOAT® Mountain is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

IMI Fabi HTP1 is used as Top coats - General industry Wood Varnish.

GRANICOAT® Sparkle is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

GRANICOAT® Solids is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

GRANICOAT® Starlight is a revolutionary solid surface material, factory applied by a fabricator, using conventional spray equipment.

FSS 45DC™ F Plus is a 100% solid, fast setting, plural component, polyurea elastomer and high perfor-mance coating. FSS 45DC-F Plus is primarily designed for properly prepared concrete and masonry, but will bond tenaciously to steel and other properly prepared substrates. It is designed as a faster, more robust ver-sion of the classic FSS 45DC. FSS 45DC-F Plus is an eco-nomical coatings solution for industrial applications re-quiring a resilient liner for waterproofing and/or abra-sion resistance. FSS 45DC-F Plus can be applied horizon-tally, vertically, and overhead, making it ideal for indus-trial applications with a variety of substrates, and com-plex geometries.