Products in Pulping & Processing: Reinforcement

HDK® T40 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® T40 finds applications in flexographic printing, gravure printing, industrial wood coatings, inkjet paper, offset printing, and printing inks.

HDK® V15 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® V15 finds its application as a thickening and thixotropic agent in silicone sealants. Additionally, it is used as a reinforcing filler in elastomers, particularly silicone elastomers.

HDK® S13 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® S13 is a white colloidal powder of high purity. It finds application in inkjet paper and pulp, paper & printing processes.

Nicron® 353 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 353 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. Nicron® 353 is also used for rheology and film reinforcement in adhesive, sealant, caulk, joint compound, wood putty, and auto body patch applications.

JetFil® P150 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P150 could also help in achieving good long-term thermal stability (heat aging).

JetFil® T490 is an off-white, extremely platy talc. This product is used for enhancing stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheet and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

Silverline 403 is an off-white, high-purity, platy, fine talc. It enhances film strength and flexibility, provides barrier properties in architectural and industrial primers, and improves corrosion resistance and stain-blocking ability. Silverline 403 is used in paints to improve low-shear viscosity and maximize prime pigment extension.

JetFil® T390 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

Nicron® 302 is a high-purity, 3-Hegman microcrystalline talc product with low oil adsorption and minimal viscosity build. Nicron® 302 is part of the Engineered Series of Magris Talc products that have unique particle size distributions for improved paint performance properties. Nicron® 302 is an excellent choice for protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 302 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

JetFil® P500 is an off-white, high-purity, extremely platy, fine talc. It is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® 700C is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

Nicron® 403 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 403 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 403 is also used in paints to improve sag resistance and maximize prime pigment extension. Nicron® 403 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

Nicron® 674 is an ultra-fine, high-purity microcrystalline talc. It is insoluble in mineral acids, hydrophobic, and non-abrasive to compounding and processing equipment. Nicron® 674 is used in a wide variety of applications, including interior/exterior coatings, color concentrates, adhesives, sealants, and thermoplastic polymers.

Nicron® 660 is an off-white, platy, high-purity, very fine talc, which is primarily used in paints and coatings. Nicron® 660 has excellent flatting characteristics, superior anti-settling properties, and is the product of choice in gel-coats. Nicron® 660 is used in rubber, wire, cable, and plastic applications.

Nicron® 402 is a high-purity, 4-Hegman microcrystalline talc product with low oil adsorption and minimal viscosity build. Nicron® 402 is part of the Engineered Series of Imerys Talc products that have unique particle size distributions for improved paint performance properties. Nicron® 402 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 402 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

JetFil® T590 is an off-white, extremely platy, fine talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® T290 is an off-white, extremely platy talc. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastic applications, including wood-plastic composites. It could also help in achieving good long-term thermal stability (heat aging).

JetFil® P350 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P350 could also help in achieving good long-term thermal stability (heat aging).

Vertal® 202 is a highly lamellar talc/carbonate mineral pigment. Vertal® 202 provides a unique balance of prime pigment spacing (opacity), flatting efficiency, film reinforcement, anti-cracking, and barrier properties for architectural and decorative coatings. Vertal® 202 is recommended for architectural flat latex paints, contractor-grade flat latex paints, and high%PVC applications that require a brighter, 2-hegman, lamellar mineral pigment.

JetFil® 700D is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is densified for reduced dust and ease of dispersion in low-shear extruders.

Silverline 303 is a high-purity microcrystalline talc product. Silverline 303 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. This product can be used as a cost-effective reinforcing agent or a dusting/parting agent.

JetFil® P200 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P200 could also help in achieving good long-term thermal stability (heat aging).

Reolosil® QS-102 is a very fine amorphous silicon dioxide made by the combustion of high-purity silicon tetrachloride with oxygen and hydrogen. Relosol is a fluffy white powder and is used in many applications because of its unique properties: extremely small particle size, enormous surface area, high purity, and excellent dispersion.

Reolosil® QS-30 is a very fine amorphous silicon dioxide made by the combustion of high-purity silicon tetrachloride with oxygen and hydrogen. Its unique properties offer advantages in many applications: silicone rubber, sealants, organic elastomers, UPR, adhesives, paint, ink, and free flow. It is used as a reinforcing, thickening, anti-settling, thixotropic, and free flow agent.

Reolosil® QS-10 is a very fine amorphous silicon dioxide made by the combustion of high-purity silicon tetrachloride with oxygen and hydrogen. Its unique properties offer advantages in many applications: silicone rubber, sealants, organic elastomers, UPR, adhesives, paint, ink, and free flow. It is used as a reinforcing, thickening, anti-settling, thixotropic, and free flow agent.