Products in Paper & Pulp: Corrosion Resistant

CMC Klebetechnik CMC 70097 is a temperature-resistant double-sided adhesive tape with a high-adhesion, temperature-resistant pure acrylic adhesive on both sides. These adhesives are distinguished by their aging resistance and chemical resistance.

KF Polymer (PVDF) is a crystalline fluorocarbon resin with a high molecular weight polymer of vinylidene fluoride that contains 59 percent fluorine by weight. PVDF, as a coating, provides an excellent corrosion barrier in temperatures ranging from -4°F to + 280°F. It is extremely tough, abrasion resistant, and easily machined.

CMC Klebetechnik CMC 10430 is a double-sided tape that is ideal for bonding siliconized surfaces. The aging-resistant polysiloxane adhesive enables self-adhesive silicone profiles and silicone mats. In the film and paper industries, the tape can also be used as splicing tape for siliconized web products.

CMC Klebetechnik CMC 80808 is a smooth double-sided adhesive tape reinforced with non-woven fibers. Very good initial tack, even on slightly rough surfaces, provides good all-around performance.

CMC Klebetechnik CMC 10718 is a double-sided polyester adhesive tape that is coated on both sides with a two-sided shecr resistant and sticky acrylate adhesive.

CMC Klebetechnik CMC 70752 is a double-sided adhesive tape that adheres to silicone surfaces and performs well at high temperatures.

CMC Klebetechnik CMC 12096 is a double-sided adhesive tape with a PET film substrate that is stabilized. The highly snear resistant adhesive performs well in UV exposure, high temperatures, chemical resistance, and humidity. Excellent permanent adhesive strength on a variety of surfaces, including those with low surface energy. A thicker material allows for better adhesion to rough or structured surfaces.

CMC Klebetechnik CMC 12010 is a double-sided tape with an acrylic dispersion adhesive and a tissue carrier.

Ply-Guard NS is a two-component, chemical resistant, non-skid epoxy coating system designed to perform exceptionally well in a broad range of severe environments, including in the presence of strong acids/alkalis and organic solvents. It should be used wherever non-skid properties, chemical and abrasion resistance, corrosive environment resistance & outstanding adhesion are essential. Ply-Guard NS is designed for use on properly prepared concrete and metal surfaces in refineries, offshore platforms, chemical plants, food & beverage plants, and pulp and paper mills.

SAUEREISEN Fast-Trak NovolaK Glaze 229 is a coating system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. FastTrak has the chemical resistance to withstand bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. Depending on the chemical and temperature environment, Fast-Trak is available in either vinyl ester or novolak epoxy formulations which are used with an appropriate Sauereisen Primer.

CMC Klebetechnik CMC 12064 is a double-sided polyester tape that has a permanent high adhesive strength on both sides.

CMC Klebetechnik CMC 12100 is a double-sided tape used for splicing. A green coating is applied to one side of the substrate.  Adhesive polysiloxane with a high initial tack. On the other hand, there is an acrylic adhesive that is still present.  provides good anchorage to low energy surfaces and will cure further after heat exposure.

Novolak VEGlaze 472 is a coating used for the chemical-resistant construction of sumps, ducts, containment areas, trenches, walls, and other support columns or bases. VEGlaze may be used as a thin barrier of corrosion resistance or as a topcoat for other Sauereisen vinyl ester linings and polymer concretes. The VEGlaze system utilizes Sauereisen VEPrime No. 550 as a bond enhancing primer.

Cera-Lube™ Nano Ceramic Grease is a high-performance, highly stable lubricant that delivers unmatched performance, durability, and wear resistance. It outlasts PTFE greases in the same applications by ten times due to its lower friction coefficient and its ability to operate in a wider range of temperatures. Cera-Lube has high load-bearing properties; a low dielectric constant; does not contain metal or silicone; and is resistant to water, steam, acids, and most chemical products, giving the lubricant greater longevity, even under intense pressures and temperatures.

Hardide-T is a tough, ductile, and impact resistant coating designed for use in abrasive and erosive environments.

CMC Klebetechnik CMC 10730 is a double-sided tape that is ideal for bonding on siliconized surfaces. The aging-resistant polysiloxane adhesive enables self-adhesive silicone profiles and silicone mats. The tape can also be used in the film and paper industries as a splicing tape for siliconized web products.

A1 Primecoat™ is a surface tolerant, two-component, multi-purpose primer (barrier coat). Formulated for high film build and long-term protection from salt/fresh water, as well as a wide variety of chemical exposures. Exceptional corrosion protection with advanced rust inhibitors. Excellent adhesion to tight rust. Fine adhesion to damp surfaces. Ideal for maintenance painting and fabrication shop applications. The high solids content ensures adequate protection of sharp edges, corners, and welds.

Ply-Guard PSC8 is a newly engineered two-component Polysiloxane coating technology offering the combination of technologically advanced siloxane resins and special ultraviolet inhibitors resulting in an industrial finish coat providing exceptional long term durability. Ply-Guard PSC8 provides extremely long-term performance and a wide range of uses such as exterior coatings for bridges, marine vessels, offshore structures, railcars, tanks, pulp and paper mills, chemical plants, refineries, and other steel structures exposed to the most corrosive environments.