Products in Other Industrial Applications: High Stiffness

Ketron® Sterra™ CA30 PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance than Ketron GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ketron® Sterra™ HPV PEEK shapes are carbon fiber reinforced with graphite and PTFE lubricants. This gives them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® Sterra™ HPV PEEK’s combination of low wear, low friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

SAMBARK LFT PP1330B is the product of injection moldable (Long-Fiber reinforced Thermoplastics) resin manufactured with a unique pultrusion technology. LFT is supplied as pellets from 6mm to 25mm long with same length of glass fibers. LFT is ideal for structural parts in automotive and industrial application. LFT is a new material that can reduce weight & cost by replacing of heavy materials.

Alkatane HD0390 is an injection molding grade of High Density Polyethylene combining excellent impact resistance with high density, hardness, stiffness and toughness.

Ceramer 60 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Ceramer 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Gichem DG08 Polypropylene is PP 40% talc, high dimensional stability and stiffness, High Injection Speed.

Ceramerplus 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

HIGH DENSITY POLYETHYLENE (HDPE) F0554 is a high molecular weight high density polyethylene resin designed for blown film applications. This resin has broad molecular weight distribution that makes it easier to process. Films made from this resin exhibit high stiffness, excellent impact and toughness characteristics.

SAMBARK LFT PP1340/1320B is the product of injection moldable (Long-Fiber reinforced Thermoplastics) resin manufactured with a unique pultrusion technology. LFT is supplied as pellets from 6mm to 25mm long with same length of glass fibers. LFT is ideal for structural parts in automotive and industrial application. LFT is a new material that can reduce weight & cost by replacing of heavy materials.

SAMBARK LFT PP1350B is the product of injection moldable (Long-Fiber reinforced Thermoplastics) resin manufactured with a unique pultrusion technology. LFT is supplied as pellets from 6mm to 25mm long with same length of glass fibers. LFT is ideal for structural parts in automotive and industrial application. LFT is a new material that can reduce weight & cost by replacing of heavy materials.

NGC400I Impact copolymer Polypropylene resin manufactured by IEPL using Spheripol Process know-how from Basell, Italy. It is a general purpose grade which can be used in many different injection molding applications.

Vapladur is a product developed with first quality polypropylene, which is used for industrial cut. It’s a very crystalline material which has a good wear resistance, high stiffness, high chemical resistance and it supports high tensile strength.

SAMBARK LFT PP1320N is the product of injection moldable (Long-Fiber reinforced Thermoplastics) resin manufactured with a unique pultrusion technology. LFT is supplied as pellets from 6mm to 25mm long with same length of glass fibers. LFT is ideal for structural parts in automotive and industrial application. LFT is a new material that can reduce weight & cost by replacing of heavy materials.

NGC120I Impact copolymer Polypropylene resin manufactured by IEPL using Spheripol Process know-how from Basell, Italy. It is a general purpose grade which can be used in different injection molding applications i.e. furniture, industrial products, housewares, caps & closures and toys.

Alkatuff LL501 is a hexene linear low density polyethylene copolymer designed for a variety of general purpose film applications. Alkatuff LL501 is formulated with a process stabilization package but contains no slip or antiblocking additives

NGC040I Impact copolymer Polypropylene resin manufactured by IEPL using Spheripol Process know-how from Basell,Italy. It is a UV stabilized grade with excellent stress crack resistance, which can be used in different injection molding applications i.e. Crates, Luggage, Furniture, Auto-components, and Bobbins etc

Ceramer 60 LF is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Ceramer 15 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

HIGH DENSITY POLYETHYLENE (HDPE) B2555 is a medium molecular weight high density polyethylene resin used for blow molding. Blow molded parts made from this resin exhibit high stiffness, good impact strength and good Environmental Stress-Cracking Resistance (ESCR).

BJ980AE is a heterophasic copolymer characterized by very high flow ability, wide flow range and balance of mechanical properties such as high stiffness and Impact.

NGC040IU Impact copolymer Polypropylene resin manufactured by IEPL using Spheripol Process know-how from Basell, Italy. It is a UV stabilized grade with excellent stress crack resistance, which can be used in different injection molding applications i.e. Crates, Luggage, Furniture, Auto-components, and Bobbins etc.

SAMBARK LFT PP1340B is the product of injection moldable (Long-Fiber reinforced Thermoplastics) resin manufactured with a unique pultrusion technology. LFT is supplied as pellets from 6mm to 25mm long with same length of glass fibers. LFT is ideal for structural parts in automotive and industrial application. LFT is a new material that can reduce weight & cost by replacing of heavy materials.

Alkatane HD0490 is an injection molding grade of High Density Polyethylene combining excellent impact resistance with high density, hardness, stiffness and toughness.

OpaLene LL T3804 is a butene co-monomer based medium density grade produced with the latest Ineos Gas Phase polymerization technology.