Products in Industrial: Heat Resistance

Cimbar XF is a high purity, natural barium sulfate. Cimbar XF is recommended for use in coatings, especially automotive and industrial primes and topcoats. Additionally, Cimbar XF is often used in high gloss enamels, powder coatings and semi-gloss and gloss latices.Cimbar XF can be used as a filler in polyurethane foams, plastics and plastisols, friction materials, rubbers, adhesives and acoustical compounds and other insulating materials. Cimbar XF is easily dispersable and is often used to impart higher surface gloss, improved hide, improved mar resistance and impact resistance.Cimbar XF also offers excellent sanding resistance, and good scrub resistance to formulations.Cimbar XF is chemically inert and is an excellent choice as a filler in corrosion resistant applications, flame retardant applications, and applications that require excellent weather resistance. Moreover, Cimbar XF exhibits superior thermal stabilty up to 1580 °C. It is therefore recommended for use in heat resistant applications. Cimbar XF helps increase heat distortion temperatures, and reduces compound stickiness.

CGSTAPE - 1258 (5 mil) is a PTFE sheet which offers a low coefficient of friction and high temperature resistance. The non-sticky and great electrical properties of PTFE film make it important in a wide variety of industries.

IMPRAMER™ B 2232 bromobutyl rubber is a brominated copolymer of isobutylene and isoprene. Product is offered as white to light amber color bale and has 0.93 as typical specific gravity.

Plenco® 06401 is a glass fiber and mineral filled two-stage phenolic molding compound. UL recognized under component file E40654. 06401 is available in black.

Millathane® 26 is often used in non-food handling applications, including rollers, because of its hydrolysis resistance and good strength properties. The inherent hydrolysis resistance of polyether urethanes makes it more forgiving in steam autoclave cure processes than polyester grades.

Plenco® 07307 is an organic fiber reinforced phenolic molding compound, offering improved mechanical strength properties. UL recognized under component file E40654. 07307 is available in black. 07307 was qualified under military specification MIL-M-14 (superseded by ASTM D-5948) TYPE CFG and batches can, if requested and paid for, be tested for certification to the standard.

Plenco® 07070 is a cotton flock and mineral filled resole phenolic molding compound, offering improved impact strength properties. 07070 is available in black.

Liquisorb 5100 is a premium blend that provides excellent stability against color fade and shift due to sun and in-store lighting.

Plenco® 07100 is an organic fiber reinforced phenolic molding compound, with improved mechanical strength properties and an industrial finish. 07100 is densified for easy handling and good pourability. UL recognized under component file E40654. 07100 is available in black.

Elix™ ABS E-LOOP H604 CR is a versatile, general-purpose grade ABS resin that offers good flow and excellent colorability, making it an ideal choice for the production of self-colored molded plastic articles. This ABS resin is designed for industrial and professional use and is suitable for a wide range of consumer goods applications, including toys for sports and recreation. Its superior flow properties and good colorability make it a popular choice for manufacturers looking to produce high-quality plastic products. Elix™ ABS E-LOOP H604 CR is available in pellet form, ensuring ease of processing and optimal performance in injection molding applications.

StrongBond™ 200 Adhesive Putty System is a high-strength, toughened, structural epoxy adhesive for the bonding of carbon fabrics to itself and many dissimilar materials. It is a two-phase (toughened) epoxy resin produced using a CTBN elastomer with a flexible epoxy resin backbone for maximum stress and fatigue resistance. StrongBond™ 200 Adhesive Putty System with an immediate high tack consistency, a long working life, and a quick cure time. StrongBond™ 200 Adhesive Putty System may be used at ambient temperature(s) ranging from 55°F(13°C) to 100°F (38°C). The working life at 100°F (38°C) is > 2 hours (working time increases with lower ambient temperatures), with full cures occurring between 6-12 hours depending on cure temperature. Unlike most epoxy adhesives, StrongBond™ 200 Adhesive Putty System cured at ambient temperatures provides heat resistance well more than most engineering limits with an HDT of 85°C (185 °F). The material mixes at 2:1 by volume or 100:44 by weight (resin to hardener). The convenient color-coded components form a uniform color when properly mixed. StrongBond™ 200 Adhesive Putty System is designed for high production meter/mix ram dispensing and although highly thixotropic, has very fast application rates. With low odor and toxicity, StrongBond™ 200 Adhesive Putty System is solvent-free, and 100% solids.

Plenco® 07591 is a mineral and flock cotton filled novolac phenolic molding compound. UL recognized under component file E40654. 07591 is available in black.

Plenco® 07476 is a cotton flock filled resole phenolic molding compound, with improved physical strength, crack resistance, and is resistant to soap and detergent solutions at elevated temperatures. UL recognized under component file E40654. 07476 is available in black.

CR 60 B 3 F1 [C5985] general-purpose rubber has an excellent balance of physical and chemical properties that make it suitable in a range of applications. Whilst it may only have a moderate resistance to petroleum-based oil and fuels, CR has a much better chemical, oil, ozone and heat resistance than natural rubber, despite the lower level of physical properties. One major benefit of Neoprene® rubber is that by nature, CR rubber is one of the few self-extinguishing rubbers, which means it is flame resistance. Additionally, its gas permeability is relatively low. For industrial applications, Neoprene® gives excellent rubber-metal bonding and has good levels of rebound resilience. This compound lends itself to being fabricated into many different products with fabric reinforcement.Outstanding physical toughness Wider short- and long-term operating temperature range than general-purpose hydrocarbon elastomersResistance to hydrocarbon oils and heat (ASTM D2000/SAE J200 categories BC/BE)Resistance to ozone, sun and weatherBetter flame retardant/self-extinguishing characteristics than exclusively hydrocarbon-based elastomersAs with all elastomers, properties inherent in the base polymer can be enhanced or degraded by compounding with additional ingredients

CGSTAPE - 1358 (3 mil) is a PTFE sheet which offers a low coefficient of friction and high temperature resistance. The non-sticky and great electrical properties of PTFE film make it important in a wide variety of industries.

Plenco® 07321 is an organic fiber reinforced phenolic molding compound, offering improved mechanical strength and excellent dimensional stability. UL recognized under component file E40654. 07321 is available in black. 07321 was qualified under military specification MIL-M-14 (superseded by ASTM D-5948) TYPE CFI-5 and batches can, if requested and paid for, be tested for certification to the standard.

Millathane® 66 is a peroxide-curable millable polyurethane rubber for the production of oil, fuel, and chemical-resistant parts which require excellent low and high-temperature performance and high mechanical strength. As is typical of polyurethanes, it also has excellent abrasion resistance.

Plenco® 06500 is a glass-reinforced phenolic molding compound offering improved strength, dimensional stability, and excellent electrical properties. UL recognized under component file E40654. 06500 is available in black.

FKM Nano PTFE 80 provides excellent resistance to heat, ozone, weathering and a wide range of chemicals and oils. It is USP class VI tested, FDA compliant and approved for medical uses.FKM has excellent resistance to ozone and weathering, oils and most chemicalsThey can operate under a wide temperature range and are inherently more resistant to burning than other non-fluorinated hydrocarbonsTheir good mechanical properties, improving sealing performance, and good compression set makes FKM a popular choiceIt is also suitable for operation within environments that require parts to be resistant to explosive decompression.