Products in Other Medical Applications: General Purpose

General purpose silicone compounds are suitable for customers that need the technical advantage and good performance of silicone without the need of special formulation. General purpose silicone compounds can be used for extrusion, compression molding, injection molding and calendered applications. Regularly a post cure is recommended to enhance physical properties. Colors will match your requirement.

VYNOVA™ S6502 is a high molecular weight and high porosity vinyl chloride homopolymer. It is a general purpose resin suitable for extrusion, calendering of both rigid and flexible PVC articles: profiles, sheets & films, compounds, and flooring.

Super Asia Polyblend 65AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Teijin Limited Panlite® L-1250Y is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding.Important attributes of Panlite® L-1250Y are: Flame Rated Good Mold Release Medium Viscosity

Teijin Limited Panlite® L-1225Y is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Panlite® L-1225Y are: Flame Rated Good Mold Release Low Viscosity Typical application of Panlite® L-1225Y: Automotive

DİOKİ GPPS 603® Dioki Petrokimya GPPS 603 is transparent general purpose polystyrene exhibiting good melt flow properties. DİOKİ GPPS 603® is basically intended for extrusion, foam extrusion and injection molding of thick-walled molded products. This polystyrene grade is characterized by good thermal and dimensional stability of molded products.

RI10HC is a polypropylene ethylene random copolymer with high clarity, for housewares, containers, lids,medical syringes, and general purpose injection molding applications where maximum clarity is desired.This grade uses Unipol® polypropylene technology from Union Carbide Corporation with the latest generation of catalyst.

Polyplastics Group Topas® 8007F-04Product DescriptionTOPAS 8007F-04 is a general purpose film extrusion grade. It is a high clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and healthcare applications. It is used in monolayer cast applications, and in coextrusions in both cast and blown processes, for a wide variety of film and sheet products requiring excellent optics in applications such as blister, twist, barrier, shrink and easy tear packaging. Industrial uses include formed decorative sheet products. For property enhancement at elevated temperatures, higher glass transition temperature (Tg) grades of TOPAS are recommended.Selected Applications Pharmaceutical blisters Deep draw barrier trays Shrink films and labels Twist films Decorative sheet Food packaging Healthcare and food contact Leading Attributes Clarity, forming, barrier, purity, halogen-free Excellent deep forming, unlike other barriers High shrink, low stress, gloss, clarity, toughness High gloss, outstanding deadfold, clean cutting Gloss, hardness, chemical resistance, forming Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Packaging and Film Extrusion TOPAS 8007F-600 - robust clarity extrusion grade especially for PE blends Topas® 8007F-04Topas® 8007F-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Typical application: Film. Primary characteristic: copolymer.

Dioki GPPS® 605 is transparent general purpose polystyrene exhibiting good melt flow properties. Dioki GPPS® 605 is basically intended for extrusion, foam extrusion and injection molding of thick-walled molded products. This polystyrene grade is characterized by good thermal and dimensional stability of molded products.

Weather Resistant grade

Super Asia Polyblend 85AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Bay Rubber Company EPDM O-Ring Cord is excellent for general applications requiring resistance to ozone, weathering, high temperatures, and some chemicals. Offered in a variety of of shapes and sizes. EPDM O-Ring Cord has good elongation properties as well as adequate resilience, tensile and compression set.

Silopren™ LSR 2665 by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used as Molding Resin for a variety of applications in Aerospace, Automotive and Aviation. It is available in Liquid form.

Weather Resistant grade

A hard, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family designed for use in medical applications.

Polyplastics Group Topas® 6013F-04Product DescriptionTOPAS 6013F-04 is a high temperature, general purpose film extrusion grade. It is a high clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and healthcare applications. It is used in monolayer and blended cast applications, and in coextrusions and blends in both cast and blown processes, for a wide variety of film and sheet products requiring excellent optics in applications such as heat resistant blister, hot fill, and easy tear packaging. If performance at elevated temperatures is not required, we also offer lower glass transition temperature (Tg) grades of TOPAS.Selected Applications Pharmaceutical blisters Decorative film and sheet General packaging Food packaging Healthcare and food contact Leading Attributes Clarity, forming, barrier, heat resistance, halogen-free Gloss, hardness, chemical resistance, forming Easy or linear tear, heat resistance, hot fill Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Packaging and Film Extrusion TOPAS 5013F-04 - high temperature grade with higher flow Topas® 6013F-04Topas® 6013F-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Typical application: Film. Primary characteristic: copolymer.

Fainplast Compounds PVC MGS 96/T is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .

Indo-Nippon Chemical Di Octyl Phthalate (DOP) is a general-purpose plasticizer. It has good compatibility with PVC, possesses all properties required for PVC processing. It is superior in electrical performance. DOP is used as a plasticizer for PVC cables and wires, floor coverings, adhesives, leather cloth, films, calendars, perfume fixative, nitrocellulose, synthetic and natural rubber, many synthetic and natural resins, drying oils, etc., Indo-Nippon Chemical Co., Ltd. also manufactures DOP - Medical Grade with high purity, with very low free alcohol content, practically free of impurities and odor. DOP of this grade is free of any additives.

Polyplastics Group Topas® 6015S-04Product DescriptionTOPAS 6015S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for optics, healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve food and drug stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (150°C) heat distortion temperature to withstand 121°C and 134°C steam and dry heat sterilization protocols, as well as gamma and EtO procedures.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO/gamma/steam sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 6013M-07 - broader processing window, best for blow molding (IBM/ISBM) TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C) Topas® 6015S-04Topas® 6015S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

DuCaVin ABC are progressive new range of flexible and rigid PVC compounds, branded as DuCaVin ABC, has been added to our expanding portfolio of high performance compounds. Developed in partnership with SteriTouch®, DuCaVin ABC compounds have been created as a response to the increasing requests for materials which reduce the growth of harmful organisms such as bacteria, mold and fungi, while remaining entirely safe for sensitive applications.

Moplen HP500N is a General purpose polypropylene homopolymer resin

Super Asia Polyblend 25AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Super Asia Polyblend 95AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Super Asia Polyblend 75AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Super Asia Polyblend 30AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Polyplastics Group Topas® 9903D-10 is a very low glass transition temperature (T g =33°C) film extrusion grade. It is designed to deliver high shrinkage at low temperatures in shrink packaging applications. It is a moderate clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and general purpose applications. It is used in blends in monolayer products, and alone or in blends in multilayer films. It can be used in both cast and blown film processes. The leading film applications are shrink films and labels. For property enhancement at elevated temperatures, higher glass transition temperature (Tg) grades of TOPAS are recommended. Due to the low glass transition temperature of this grade, shipment and storage of pellets at room temperature or below is strongly recommended.

Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Super Asia Polyblend 90AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Super Asia Polyblend 55AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Hoehn Plastics HDPE 71725 is an high density polyethylene pellets type with unfilled filler.

Dioki GPPS® 604 is transparent general purpose polystyrene exhibiting good melt flow properties. Dioki GPPS® 604 is basically intended for extrusion, foam extrusion and injection molding of thick-walled molded products. This polystyrene grade is characterized by good thermal and dimensional stability of molded products.

McLube® 1850 has excellent general-purpose release for any plastic compound. Will offer multiple releases per application. Dries instantly with no cure required.

Super Asia Polyblend 45AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Teijin Limited Panlite® L-1225L is a Polycarbonate (PC) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Panlite® L-1225L are: Flame Rated Good Mold Release Low Viscosity Typical application of Panlite® L-1225L: Automotive

Dioki GPPS® 607 is transparent general purpose polystyrene exhibiting good melt flow properties. Dioki GPPS® 607 is basically intended for extrusion, foam extrusion and injection molding of thick-walled molded products. This polystyrene grade is characterized by good thermal and dimensional stability of molded products.

Osterman & Company Inc. Osterlene® GPPS0900 is a crystal polystyrene for both injection molding and cap layer co-extrusion.Injection molding applications such as medical and laboratory parts, tumblers and jewel boxes demonstrate the polymer's ability to be molded with minimal stresses and fast cycles.Utilizing GPPS0900 as a cap layer in cups, plates and other consumer disposables takes advantage of this polymer's melt rheology.