Products in Packaging & Assembly: Electrical Components

CLH5185 is a heat cure, low stress, extremely tough, epoxy casting compound. It was specifically designed for casting large bushings, insulators, instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets ul94-hb flammability requirements.

GuangDong ShunDe LuHua Photoelectric New Material Industrial LH-PS680 is suitable for injection molding carrier tape, turnover box, electronic packaging products, electronic and electrical accessories.

CLR1837 is a heat cure, low stress, extremely tough, epoxy casting compound. It was specifically designed for casting large bushings, insulators, instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling characteristics. This product meets ul94-hb flammability requirements.

CLR1876 is a thermally conductive, two part epoxy system. the system was secifically designed for applications where heat dissipation on thermally sensitive devices is required.

CLR1821 is a filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio makes it suitable for processing in automatic dispense equipment. This product is certified with ul and passes ul94-v1 flammability testing.

CLR1329 is a two component heat cured epoxy casting system. The cured product is suitable for outdoor applications. The product passes accelerated in-house ultraviolet testing without chalking. The product passes in-house ul 94-hb flammability testing.

CLR1946 is a two component, room temperature cure semi-flexible epoxy system. the system was developed for potting/casting of electrical and electronic components. its use of non abrasive fillers and convenient 1:1 ratio by volume, makes it ideal for use in machine dispensing equipment.

CLH6441 is a filled, room temperature cure, two component epoxy system. The system is suitable for potting and encapsulating electrical and electronic components. The products use of non-abrasive filler and convenient mix ratio makes it suitable for processing in automatic dispense equipment. This product is certified with ul and passes ul94-v1 flammability testing.

CLP7469 is a solventless, low viscosity, two component, polyurethane casting system, specifically designed for casting transformers, coils and electronic components. This product is especially suitable for encapsulating low and middle voltage power and instrument transformers where cushioning of the core is not practical. The cured product has excellent thermal shock resistance.

CLR1157 is a heat cure, low stress, extremely tough, epoxy casting compound. The product was specifically designed for casting electrical motors. the cured material exhibits excellent thermal stability and thermal cycling characteristics.

CLI4161 is a solventless, low viscosity, two component, polyurethane casting system, specifically designed for casting transformers, coils and electronic components. This product is especially suitable for encapsulating low and middle voltage power and instrument transformers where cushioning of the core is not practical. The cured product has excellent thermal shock resistance.

XR61406 is a low density epoxy casting system. product is recommended for reducing weight, when casting and potting small electronic modules. Product is suitable for operating in environments from -40c. to +120c.

CLR1331 is a low stress, extremely tough casting compound which was developed for casting low voltage bushings and insulators.

Addkan Antistatic Masterbatches are based on fatty acid ester type of anti-static agents to neutralize the charges on the surface of the polymer. By using anti-static additives, problems caused by static electricity charge will be reduced or eliminated.

XRD1018 is a two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets ul94-v0 in house flammability testing.

CLH5100 is a two component heat cured epoxy casting system. The cured product is suitable for outdoor applications. The product passes accelerated in-house ultraviolet testing without chalking. The product passes in-house ul 94-hb flammability testing.

CLH6230 is a semi-flexible epoxy casting system. This product was specifically developed for potting/casting of electrical and electronic components. The long pot life of the material makes it suitable for large mass castings or heat induced curing with minimal stress. Product passes Ul 94-Hb In-house flammability testing. for a softer system, Clr 350 is recommended. using the same cure schedule, Clr 3516, a black version of Clr 3517, passed class B, 130C. when tested to Ul 1446.

XPD1278 is a low viscosity, two component, polyurethane casting resin specifically designed for casting transformers, coils and electronic components. The cured product has excellent thermal shock resistance.

CLH6500 is a two component, room temperature cure semi-flexible epoxy system. the system was developed for potting/casting of electrical and electronic components. its use of non abrasive fillers and convenient 1:1 ratio by volume, makes it ideal for use in machine dispensing equipment.

CLH6010 is a low stress, extremely tough casting compound which was developed for casting low voltage bushings and insulators.

CLH5515 is a two component, unfilled, heat cure epoxy system. It was specifically developed for impregnating coils. The cured material exhibits excellent thermal stability and thermal cycling characteristics.

Nizhnekamskneftekhim ABS Plastic 1534 is an easy flow, molding grade, with a medium heat resistance and impact strength, enhanced heat resistance during the process. It is an indigenous due to low yellow index and color resistance. It can be used mainly for production automobile internals. It is produced self-colored only, additives/ dye free.

CLR3517 is a semi-flexible epoxy casting system. This product was specifically developed for potting/casting of electrical and electronic components. The long pot life of the material makes it suitable for large mass castings or heat induced curing with minimal stress. Product passes Ul 94-Hb In-house flammability testing. for a softer system, Clr 350 is recommended. using the same cure schedule, Clr 3516, a black version of Clr 3517, passed class B, 130C. when tested to Ul 1446.

CLH6020 is a thermally conductive, two part epoxy system. the system was secifically designed for applications where heat dissipation on thermally sensitive devices is required.

XHD1019 is a two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets ul94-v0 in house flammability testing.