Products in Other Electrical & Electronics Applications: High Temper...

PPS-SG201E2L is a 20% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,chemical resistance and excellent processability

Ceramerplus 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Current Incorporated LAMINATED SHEET NEMA G-11/FR5 MIL-I-24768/28 is similar in composition and properties to Grade G-10/FR4, but is more suitable for continuous use at higher temperatures. At continuous elevated operating temperatures of up to 300°F, G-11/FR5 retains at least 50% of its flexural strength.

Disheng Technology UV absorber UV-329 is suitable for polyester, rigid polyvinyl chloride, polystyrene, polymethyl methacrylate, polycarbonate, ABS resin, etc. Especially effective in transparent products and high-temperature processed engineering plastics. This product can also be used for polyolefins.

PC-ABS Gecomblend 3000 FR HT is a flame-retardant PC / ABS type with very good temperature resistance, fire protection class V-0 (1.5mm).

Hsin Sou Chemical HSINSOU ET-P110 are high polymer, permanent antistatic granules. They reduce the surface resistivity of the polymeric materials and give a long-lasting antistatic property by formatting of a conductive percolation network. This network will dissipate the electric charge across the surface and throughout the bulk of the polymeric materials. HSINSOU ET-P110 are applicable to TPU and TPR plastic base compounding. If incorporation with the recommend amount, the surface resistivity of application can achieve 109～1012 Ω/sq.

PPS-SG505E45 PPS is a 50% glass fiber reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties and processability

PEEKshrink® is a linear, semi–crystalline aromatic polymer, is considered one of the highest performing thermoplastic materials; it can withstand extreme temperatures, high pressure and caustic fluids. Now, Zeus has taken PEEK to an entirely new level of performance with PEEKshrink™. PEEKshrink™ provides a shrink-to-fit layer of protection for sensitive components and critical connections. PEEKshrink™ is an ideally suited product for challenging environments such as oil and gas exploration where abrasion, intense pressure, chemicals, water, or dielectric interference pose a threat to wires and electrical components. PEEKshrink™ is an obvious and optimal splicing aid for PEEK insulated wire. PEEKshrink™ is an alternative to traditional fluoropolymer protective coatings with its very wide working temperature range.

ZA OF1 is a addition silicone (PLATINUM curing agent), appears in form of gel. It's color is translucid and used in special effects and electronic use.

Disheng Technology Ultraviolet absorber UV-1577 is suitable for polyetheramine, polybutylene terephthalate, polycarbonate, polyetherester, polymethyl methacrylate, acrylic copolymer, polyamide, polystyrene, styrene-acrylonitrile resin and polyolefin etc.

PPS-SG501T87 PPS is a 50% glass fiber reinforced linear polyphenylene sulfide compound developed to provide excellent engineering properties and processability

SAYTEX® HP-7010 flame retardant is a polymeric additive containing thermally stable, aromatic bromine. It is available in powder (HP-7010P) or granule form (HP-7010G).SAYTEX HP-7010 flame retardant provides outstanding thermal stability and electrical performance. It is particularly suitable for engineering plastic applications such as polyesters (PET, PBT, PCT) and polyamides (nylons).

Ceramer 60 LF is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

PPS-SG503E65 PPS is a 50% glass fiber reinforced polyphenylene sulfide compound developed to provide excellent engineering properties and processability

Wynca XHG-6330 is a two-component, low viscosity liquid silicone rubber designed for electric and electronic potting. It is flame retardant and provides good dielectric property and excellent resistance to temperature extremes.

Polyfill Technologies Black Masterbatch is based on LDPE. It contains Blends of Antioxidants and UV Stabilizer Aids dispersed in the Polymer Matrix to give excellent performance in environmental condition. It is One Pack System which when mixed with polymer meets the desired properties.

PPS-SG301A65 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

Disheng Technology UV absorber UV-360 is a high-efficiency ultraviolet absorber that can absorb 300-400nm ultraviolet rays and is widely compatible with a variety of resins.

Disheng Technology Ultraviolet absorber UV-326 hardly absorbs visible light, and is especially suitable for colorless, transparent and light-colored products.

Ceramer 60 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Ceramer 20 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

PPS-SG303E41 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

The compound NEXA® PFX 9020 is a new and innovative chemical resistance Perfluoroelastomer filled with a special semi-crystalline perfluoropolymer filler. Due to its innovative and unique technology, allows the manufacturing of translucent items with excellent final properties. The compound PFX 9020 contains a proprietary cure system that improves high temperature performance.

Akron Polymer Systems APS-PEM-B is a polymer blend that can be used to prepare high temperature PEMs that can be used in phosphoric acid based fuel cells.

SAYTEX® CP-2000 flame retardant is a reactive intermediate, or additive, depending on the application.As a reactive flame retardant, SAYTEX CP-2000 flame retardant finds particular application in epoxy, vinyl esters and polycarbonate systems. As an additive flame retardant, SAYTEX CP-2000 flame retardant is widely used in ABS.

The compound NEXA® PFX 9010 is a new and innovative chemical resistance Perfluoroelastomer filled with a special semi-crystalline perfluoropolymer filler. Due to its innovative and unique technology, allows the manufacturing of translucent items with excellent final properties. The compound PFX 9010 contains a proprietary cure system that improves high temperature performance.

SAYTEX® 8010 flame retardant is a non-diphenyl oxide based product containing a high level of aromatic bromine.SAYTEX 8010 flame retardant can be used in a wide range of high performance applications. In particular it finds use in styrenic polymers, engineering resins, wire & cable and elastomers.

Ceramer 15 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

PEEK™ Tubing is a linear semi-crystalline aromatic polymer, is considered the highest performing thermoplastic material due to its ability to withstand extreme temperatures, high pressure, and caustic fluids. Now Zeus has taken PEEK to an entirely new level of performance with the introduction of PEEKshrink™ – PEEK heat-shrinkable tubing.

Disheng Technology UV absorber UV-P hardly absorbs visible light, especially suitable for colorless, transparent and light-colored products.

Tufnol Grade 10G/50 is a laminated plastics material made from woven glass fabric, bonded with silicone resin. It is a rigid sheet material with good resistance to high temperatures and very good electrical insulation properties, especially in applications involving very high frequencies. Note, however, that silicone bonded laminates have mechanical strength properties somewhat lower than some other glass fabric laminates.