Products in Other Electrical & Electronics Applications: Silicones

Staticide® 8699 Heat Sink Grease is used to maximize heat transfer and dissipation from electronic and electrical components. This silicone-based material is thickened with a heat-conductive metal oxide to maintain a positive heat sink seal. With its excellent conductivity, it is an effective thermal coupler for any heat sink surface. Unlike some heat sink formulas, Staticide® 8699 Heat Sink Grease will not separate. The high dielectric strength and low bleed properties make it ideal for various applications, including engineering and design work. It is a one-component, ready-to-use product that does not dry out, harden, or melt.

Cuyahoga Plastics AB1000F is an extremely high heat resistant, electrical grade thermoset composite molding compound. Compression, transfer and injection molding grades are available. It is currently supplied in bulk form, cut preforms and box length extrusions.

Changzhou Juyou New Material Technology JY201-50 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

ThreeBond Europe SAS TB3303M has been developed for bonding electrical and electronic parts, which require low outgas. A 2-component epoxy type electroconductive adhesive, it may be cured at room temperature, although curing at an elevated temperature reduces the amount of outgas further.

Clearco Products Silicone Grease NLGI#1 O‐Ring & Valve Lubricant is an NLGI #1(lowest stiffness) Silicone Grease, formulated with Polydimethylsiloxane and inert silica filler. It is used in a variety of applications that require: wide range of thermal stability, high dielectric strength, electrical insulation, inertness to rubber and plastic surfaces, and insulation against corrosion and moisture.

Techneglas GR650F is high performance thermosetting polysiloxane resins.

Changzhou Juyou New Material Technology JY201-500 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

ThreeBond Europe SAS TB1225B is a one-component silicone adhesive sealants for the bonding, fix-sealing, coating, and potting of electrical and electronic parts. Conventional de-alcohol silicone RTV rubbers have slow surface-curing and deep-curing properties, as well as unsatisfactory storage stability. The products in the 1220 series show remarkable improvements in all these properties. They dry and cure quickly at room temperature, they are resistant to corrosion, and they have excellent storage stability.

Novagard® G635 is an amorphous fumed silica thickened, methyl-diphenyl polysiloxane based compound. The very broad operating temperature range typical of phenyl-modified silicone fluids characterizes Novagard® G635. The product retains its superior lubricity and dielectric character in temperature extremes from as low as –57°C to as high as 200°C.

GS® 825 Sealant is one of the most chemically advanced silicone based extruded sealants on the market and was primarily formulated for applications that see extremely high temperatures such as furnaces, ovens, and water heaters.

ZA OF1 is a addition silicone (PLATINUM curing agent), appears in form of gel. It's color is translucid and used in special effects and electronic use.

Changzhou Juyou New Material Technology JY201-1000 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

ThreeBond Europe SAS TB1220H is a one-component silicone adhesive sealant for the bonding, fix-sealing, coating, and potting of electrical and electronic parts. Conventional de-alcohol silicone RTV rubbers have slow surface-curing and deep-curing properties, as well as unsatisfactory storage stability. The products in the 1220 series show remarkable improvements in all these properties. They dry and cure quickly at room temperature, they are resistant to corrosion, and they have excellent storage stability.

Aptek® 2713-A/B is a two component, silver filled, electrically conductive soft paste adhesive. It is designed to bond many dissimilar substrates and dissipate device generated heat. Aptek® 2713-A/B is a 100% solids, solvent free system that will not form voids during cure or outgas after being fully cured.

Wynca XHG-6330 is a two-component, low viscosity liquid silicone rubber designed for electric and electronic potting. It is flame retardant and provides good dielectric property and excellent resistance to temperature extremes.

Changzhou Juyou New Material Technology JY201-10 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

Changzhou Juyou New Material Technology JY201-100000 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

Changzhou Juyou New Material Technology JY201-10000 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

Techneglas GR150F is high performance thermosetting polysiloxane resins.

Changzhou Juyou New Material Technology JY201-100 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

Changzhou Juyou New Material Technology JY201-350 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

Changzhou Juyou New Material Technology JY201-20 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

Changzhou Juyou New Material Technology JY201-125000 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

Techneglas GR100F is high performance thermosetting polysiloxane resins.

Changzhou Juyou New Material Technology JY201-5 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

Versilube® G351 is a soap-thickened, dimethyl-diphenyl polysiloxane based grease. Versilube® G351 resists oxidation and degradation even under extreme conditions.

Changzhou Juyou New Material Technology JY201-5000 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.

Tufnol Grade 10G/50 is a laminated plastics material made from woven glass fabric, bonded with silicone resin. It is a rigid sheet material with good resistance to high temperatures and very good electrical insulation properties, especially in applications involving very high frequencies. Note, however, that silicone bonded laminates have mechanical strength properties somewhat lower than some other glass fabric laminates.

Changzhou Juyou New Material Technology JY201-300 has a strong shearing resistance, good transmission of light low surface tension , excellent water repellency and moisture resistant and low volatilitioon.