Products in Other Consumer Goods Applications: Footwear

Arnitel® EL740 is a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries spanning automotive to E&E, it is gaining popularity as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. This material is processed using injection molding technology and meets food contact quality requirements.

Mercure TBBS is delayed action sulphenamide alone or in combination with small quantities of booster accelerators is widely used in NR, SBR, NR/BR/SBR blend, NBR and other synthetic rubber based compounds used for the manufacture of auto tire treads, sidewalls, casings, cycle tires & tubes, conveyor & V-belts, tire retreading & repair materials, footwear, hoses, cables, injection molded products and various compression / transfer molded as well as extruded rubber goods.

TMTD (TT) Oil Powder is Thiuram. It is white or grayish powder, soluble in benzene, acetone, chloroform,carbon disulfide, insoluble in water and gasoline.

TMTD (TT) Powder is Thiuram. It is white or grayish powder, soluble in benzene, acetone, chloroform,carbon disulfide, insoluble in water and gasoline.

Kemai Chemical ACCELERATOR CZ (CBS) is an after-effect accelerator. It has high performance of scorching resistance and short curing time. It mainly used for making tire, rubber tubes, shoes, tapes and cables.

Mercure ZMBT is semi ultra-fast accelerator / its combinations with booster accelerators are used in NR, SBR, SBR-NR / BR blends, NBR, IIR, EPDM, and other synthetic rubber based compounds used for the manufacture of motor cycles and scooter tires, butyl tubes, cycle tire and tubes, beltings, retreading materials, footwear, hot air cured products and miscellaneous molded and extruded products.

Polyester-Based TPU2 HF-1170AP by Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Gardening shoes, Accessories, Fashion shoe sole and Heel life.

Elafleks® DOA (Dioctyl Adipate) is used as a softener in all PVC paste and pulp mixtures. Used in PVC shoe and slipper base production, synthetic leather, PVC granule production, production of membranes and water holder bands, paint and varnish sectors, floor covering and door mat production, PVC höse production and widely used in calendaring systems.

CBS (CZ) Particle is Secondary Sulfonamide. It is grayish white or yellowish powder with slightly odor and nonpoisonous. It is soluble in benzene, methylbenzene, chloroform, carbon disulfide, carbon tetrachloride, methylene chloride, acetone and ethyl acetate; not easily soluble in ethyl alcohol; insoluble in water,dilute acid, dilute alkali and gasoline.

Mansil 190 is a ultra high surface area, ultra white spray dried powder or granules having excellent dispersion properties resulting in desired reinforcement in rubber compound.

Cross-linked polyethylene foam is used in Steel composite layers, construction tape, underground cables for the external protection, heating equipment, insulation, sealing tape, building insulator, seal tank, helmet, waterproof material, floor insulation materials, cushioning buffer materials.

Universal Colorant Company UNICOL-CC is the polymer less Masterbatch. It cuts your cost, as Unicol – color concentrate contains high pigment loading from 40 % to 85 % depending on color and final application. So by adding 50 % to 80 % colorant than polymer base master batch. This is how you can save a considerable amount of your present color cost.

Universal Colorant Company Diamond Black has 50% of carbon black content in its composition that makes it suitable for use as the black pigment in many plastic applications. The masterbatch is available in industry according to different requirements of the clients including UV protection, conductivity, jetness, etc in the end products. This type of masterbatch is mostly preferred due to its high surface area that further increases with the decrease in the particle size. We have varieties of black masterbatches that have particle size ranging from 10 to 120 nm. Major application areas of this masterbatch are blow molding, injection molding, HDPE pipes and mono filaments.

Mansil 160 is a medium surface area, ultra white spray dried powder or granules having excellent dispersion properties resulting in desired reinforcement in rubber compound.

TPU T3170 is a polyester based material with good processability, short cycle time, and excellent mechanical properties for injection molding applications.

ISOTHANE 1080A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Mansil 160G is a medium surface area, ultra white spray dried powder or granules having excellent dispersion properties resulting in desired reinforcement in rubber compound.

TPU T3160 is a polyester based material with good processability, short cycle time, and excellent mechanical properties for injection molding applications.

Polyester-Based TPU2 HF-1185A by Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Gardening shoes, Accessories, Fashion shoe sole and Heel life.

ISOTHANE 1065A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Kemai Chemical ACCELERATOR DM (MBTS) is a general-purpose accelerating agent of the natural rubber, the synthetic rubber and the regenerative rubber. It major used to produce tires, the inner tube of a tire, gummed tape, rubber overshoes, and general industrial products.

Mansil 130 is a low surface area, ultra white spray dried powder or granules having excellent dispersion properties, resulting in desired reinforcement in rubber compound

PZ Powder is a Rubber accelerator.

Polyester-Based TPU2 HF-1195A by Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Gardening shoes, Accessories, Fashion shoe sole and Heel life.

JSR has developed this grade as the only supplier in the world. Applications are broad. For example, the vibration absorbing materials for automobile, films, tubes, rubber shoe soles, some injection molded products and plastic modifiers.

Plaox DODPA is a General purpose antioxidant for all elastomers; specially purified for many nonstaining and moderate discoloring applications such as cables, footware, flooring, gaskets, bicycle tubes and tires.

TPU T3175 is a polyester based material with good processability, short cycle time, and excellent mechanical properties for injection molding applications.

S&E Polymer Solutions V-TEM 150 are plasticized polymers with a range of durometers and toughness to meet various material requirements.

PA 6 with improved impact strength

Continental Carbon N774 is easy mixing, high loading, and easy extrusion black. Used in belts, hoses, molded goods, and footwear.

Universal Colorant Company Jet Blackhas 50% of carbon black content in its composition that makes it suitable for use as the black pigment in many plastic applications. The masterbatch is available in industry according to different requirements of the clients including UV protection, conductivity, jetness, etc in the end products. This type of masterbatch is mostly preferred due to its high surface area that further increases with the decrease in the particle size. We have varieties of black masterbatches that have particle size ranging from 10 to 120 nm. Major application areas of this masterbatch are blow molding, injection molding, HDPE pipes and mono filaments.

European Plastic Joint Stock Company PP Filler Masterbatch is compounded of Calcium Carbonate CaCO3, Polypropylene PP as the carrier and other special additives by twin-screw machines.

TPU T3190X is a polyester based material with good processability, short cycle time, and excellent mechanical properties for injection molding applications.

S&E Polymer Solutions V-TEM 50 are plasticized polymers with a range of durometers and toughness to meet various material requirements.

PX(ZEPC) Powder is a Rubber accelerator.

Mansil 190G is a ultra high surface area, ultra white spray dried powder or granules having excellent dispersion properties resulting in desired reinforcement in rubber compound.