Products in Footwear: Polyolefins

Espolex® 3255 is a TPV known for its excellent colorability and appearance. It forms strong bonds with polypropylene compounds and polyethylene, while exhibiting thermoplastic processing characteristics combined with rubber-like properties. It is particularly well-suited for two-shot molding. Its applications include: Handle grips Gaskets Active spoilers Appliances Automotive exterior trim Automotive interior trim Boats Jet-propelled vehicles Mud flaps Weatherstripping Over-molding Injection molded parts   Features: Excellent flowability Great surface appearance for styling Easy bonding with other materials Benefits: Anti-slip properties Noise reduction

Noblen® CHN-250 Natural is a talc-filled polypropylene impact copolymer with high stiffness. It is used in automotive interior applications requiring an excellent balance of impact, flow, and stiffness. This product is suitable for Injection molding.   Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle   Features: Good stiffness with impact performance and high Melt flow   Benefits: Easy to fill large parts

Noblen® AGM 350 Natural is a polypropylene impact copolymer. True reactor grade provides consistent natural color making colorability very easy.   Applications:  Large components  Appliances  Automotive Interior Trim Boat Jet-propelled Vehicle    Features:  High Melt Flow    Benefits: Easy moldability with low pressure.  Consistently easy to color Quick cycle time

Espolex® CPD-450 is a Thermoplastic Elastomer which processes like a thermoplastic and acts like a rubber with excellent flowability. Good balance of stiffness and durometer. Applications: Bin and Floor Mats Appliances Automotive Exterior Trim Automotive Interior Trim Boat Jet-Propelled Vehicle Mud Flaps Weatherstripping Over-molding Injection Molded Parts   Features: Heat Stabilized Black High Melt Flow   Benefits: Anti slip Noise reduction

Noblen® BPC 80 Natural is a polypropylene impact copolymer with 20% talc fill. ultra-high melt flow, which is excellent for low pressure molding and foaming (core back).   Applications: Large parts requiring ultra high flow and stiffness. Appliances  Automotive Interior Trim Boat Door Panel Jet-propelled Vehicle    Features: Heat Stabilized Very High Melt Flow   Benefits: Quicker cycle times Lower Pressure Molding

Noblen® AGM 250 Natural is a polypropylene impact copolymer with excellent cold temperature impact strength. True reactor grade with medium flow ability Low-stress whitening   Applications: Large parts requiring high impact. Appliances Automotive Interior Trim Head Impact Boat Jet-propelled Vehicle   Features: -20 ⁰C Temperature Ductility Good Scratch Resistance     Benefits: Low-stress whitening High Melt flow and impact balance Consistently easy to color

XECARB® 18-C30 is a 30% carbon fiber reinforced HDPE

XECARB® 11-C20-HP is a 20% carbon fiber reinforced PP

XECARB® HM 11-C20-HP is a 20% carbon fiber reinforced PP

Kolon Industries HIKOTACK® P-110S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

Adhesive Films EAF-220 is used in wood, leather ,rubber, fiberglass, aluminum, copper and steel applications.

Jilin Xingyun Chemical (Jilin Chemical Group) CSM-45 Grade I is chiefly applied in making of high rigidity products, such as plastic carpet, waterproof roof, shoe sole and sponge insole.

Characteristics: Low melt flow rate Homopolymer polypropylene with excellent mechanical properties and color, excellent gage control and high melt strength. Recommended for: Extrusion of strapping, sheets, Cartonplast, extrusion thermoforming, extrusion blow molding of bottles, injection molding of heels, extrusion and injection molding general purpose applications.

3H Vinacom PVC Compound are included insulation and sheath application of wire and cable with temparature rating of less then 1050C and conform to the international and Vietnam standards such as ASTM D1505, UL 62, UL 94, IEC 60502, IEC 60227, TCVN 5935, TCVN 6610, RoSH directive 2002/95/EC and its amending directives.Beside that special PVC properties are available upon customers requirement. There also available some grades are produced with characteristics of durableness, termite resistance, heat resistance, flamable resistance, dull and gloss surface.

ADDAPT WaxMul WM 120 is a wax emulsion based on a balanced blend of Polyethylene and Paraffin waxes giving buffable films with excellent gloss and water repellent properties. It is an emulsion of Polyethylene and Paraffin waxes in water.

ADDAPT WaxMul WM 25 is a high melting point PE-wax emulsion giving excellent abrasion resistance and also improves the (wet) scrub resistance of Paints and Inks. It is an emulsion of Polyethylene wax in water.

Characteristics: Low melt flow rate Homopolymer polypropylene with excellent mechanical properties and color, excellent gage control and high melt strength. Recommended for: Extrusion of strapping, sheets, Cartonplast, extrusion thermoforming, extrusion blow molding of bottles, injection molding of heels, extrusion and injection molding general purpose applications.

Yparex® 0F0002 is a family of maleic-anhydride-(MAH)-functionalised polyolefins. For each of its many application areas Yparex® has suitable grades. The grades are characterized by density and melt flow index, melting temperature and the level of functional groups. Functionality for the varying application range is also obtained by using a large array of different base polymers and production technologies. The materials are produced under the highest quality standards allowing no residual unbonded maleic anhydride in the final product.

JSR NE60F are Polymer Alloys consisting of Nitrile Rubber and EPDM. It is a material which has the oil resistance of Nitrile Rubber and weather resistance of EPDM.

PREGNIT TP-PP is resistant to non-oxidizing Acids and alkalis.

Alveolux foam blocks display a very fine and round cell structure and a strong foam skin of the raw blocks. As a highly robust foam, it is often used in applications where excellent appearance, high thickness, high strength, or good press forming properties play an important role. Alveolux is biocompatible, skin-friendly, and tested for harmful substances.

ADDAPT WaxMul WM 110 is a wax emulsion based on a balanced blend of Polyethylene and Paraffin waxes giving water repellent properties as well as a matting effect. It is an emulsion of Polyethylene and Paraffin waxes in water.

Adhesive Films EAF-210 is used in wood, rubber, fiberglass, aluminum, copper and steel applications.

Yparex® 0F0038 is a family of maleic-anhydride-(MAH)-functionalised polyolefins. For each of its many application areas Yparex® has suitable grades. The grades are characterized by density and melt flow index, melting temperature and the level of functional groups. Functionality for the varying application range is also obtained by using a large array of different base polymers and production technologies. The materials are produced under the highest quality standards allowing no residual unbonded maleic anhydride in the final product.

PREGNIT TP-PE has high resistance to acids, Alkalis and chemicals.

ADDAPT WaxMul WM 35 is a high melting point PE-wax emulsion giving very good wet scrub resistance of Paints and improves the buffability of Floor polishes. It is an emulsion of Polyethylene wax in water.

JSR NE40F are Polymer Alloys consisting of Nitrile Rubber and EPDM. It is a material which has the oil resistance of Nitrile Rubber and weather resistance of EPDM.

Alveolen is a physically crosslinked, closed-cell polyolefin foam produced in continuous sheets in a three-stage process: extrusion, crosslinking, and horizontal foaming. The foam sheets have fine, round cells. The two foam skins are smooth and scratch resistant.

DurPack® Non-Cross Linked Polyethylene Foam has straight bond structure and it is produced with extrusion method with chemicals and inflator gas addition. Compared to our cross-linked polyethylene foam product DurProx and DurSolex, DurPack (Non-cross Linked Polyethylene Foam) has straight bond structure and it is produced with extrusion method with chemicals and inflator gas addition. Compared to our cross-linked polyethylene foam product DurProx and DurSolex, DurPack is more economical and is mostly used in the application areas where the standards are not as demanding. DurPack is used for sound, heat and humidity insulation and shock protection. DurPack is more economical and is mostly used in the application areas where the standards are not as demanding. DurPack is used for sound, heat and humidity insulation and shock protection.

ADDAPT WaxMul WM 15 is a high melting point PE-wax emulsion with excellent resistance to yellowing. It is an emulsion of Polyethylene wax in water.

ADDAPT WaxMul WM 45 is a very high melting point PP-wax emulsion giving excellent surface hardness and blocking resistance. It is an emulsion of Polypropylene wax in water.

JSR NE70F are Polymer Alloys consisting of Nitrile Rubber and EPDM. It is a material which has the oil resistance of Nitrile Rubber and weather resistance of EPDM.