Products in Other Automotive & Transportation Applications: Processi...

Pepton® 66 is a dust free, pellet form chemical peptiser which provides handling and environmental improvements over conventional powder form peptisers.

Pepton® 44T Prills is a dust free, prill form peptiser which offers handling and environmental improvements over conventional powdered peptisers.

Pepton® 22 is a peptiser for use in the high-temperature mastication of natural and synthetic rubbers.

Trecora Chemical CWP400E is a polyethylene wax. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Exhibits abrasion-, rub- and mar resistance. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can be used to control gloss to achieve a desired matt effect. CWP400E by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

EVERNOX-B110 is used in polyolefins and olefins-copolymers such as LDPE, HDPE, LLDPE, PP and EVA. It can also be used in other polymers such as engineering plastics, styrene homo and copolymers such as PBT, PET, PA, POM, PS, ABS, PUR, elastomers BR, SBR, SBS, adhesives and other organic substrates. The B-blends can be used in combination with light stabilizers of UV-absorbers and hindered amine light stabilizers.

Cel-Span® Process Aid 332 is a non-clear compounded product containing a high level of thermal stabilizers and CAC0₃ to provide protection of film resins during high temperature extrusion and lamination processes, thus maximizing inherent physical properties of the natural al resins. CelSpan® Process Aid 332 eliminates build up in both internal and external metal surfaces of the extrusion die, as well as reduction of wrinkles in thin gage films. This product will extend Tio₂ up to 5% without loss of opacity.

Trecora Chemical CWP2030 is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP2030 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical CWP400 is a polyethylene wax. Exhibits abrasion-, rub- and mar resistance. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can be used to control gloss to achieve a desired matt effect. CWP400 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

EVERNOX-B1411 is used in polyolefins and olefins-copolymers such as LDPE, HDPE, LLDPE, PP and EVA. It can also be used in other polymers such as engineering plastics, styrene homo and copolymers such as PBT, PET, PA, POM, PS, ABS, PUR, elastomers BR, SBR, SBS, adhesives and other organic substrates. The B-blends can be used in combination with light stabilizers of UV-absorbers and hindered amine light stabilizers.

ULTRA-LUBE™ 200 is a processing additive for most rubber compounds. It shows outstanding performance as a dispersing aid for most fillers used in rubber compounding. In injection and transfer molding ULTRA-LUBET 200 leads to faster mold filling due to its internal lubrication. An improved mold release can also be observed. ULTRA-LUBE™ 200 also works very well as an internal release agent that prevents sticking of compounds to mill rolls, calendering bowls and internal mixer rotors. ULTRA-LUBE™ 200 does not adversely interfere with most curing systems. Due to its low dosage level there is little or no effect on physical properties of the finished goods.

Trecora Chemical OX-7 is an oxidized polyethylene wax. It is easily emulsified. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-7 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical CWP500E is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP500E by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Cel-Span® Process Aid 610L is a processing concentrate in a compatible resin carrier used in extrusion and injection processes to enhance flow and reduce the processing temperature while increasing productivity for all types of polyolefin resins. Cel-Span® Process Aid 610L contains a unique additive that enhances the flow characteristics of polyolefin resins, reduces cycle time, while improving mold filling in multiple cavity molds. In extrusion and blow molding applications, Cel-Span® Process Aid 610L enhances flow and reduces processing temperature of polyolefin resins as much as 30 to 50 degrees. This reduction in processing and melt temperatures results in less polymer degradation, better color, lower cycle time and higher output especially in sheet, injection molding,and blow molding applications, and extrusion applications.

EVERNOX-B410 is used in polyolefins and olefins-copolymers such as LDPE, HDPE, LLDPE, PP and EVA. It can also be used in other polymers such as engineering plastics, styrene homo and copolymers such as PBT, PET, PA, POM, PS, ABS, PUR, elastomers BR, SBR, SBS, adhesives and other organic substrates. The B-blends can be used in combination with light stabilizers of UV-absorbers and hindered amine light stabilizers.

ULTRA-PEP™ 90 is a multi functional processing additive. ULTRA-PEP™ 90 works as a mild mastication agent in the early stage of NR compounding and subsequently aids filler dispersion and down line processing, like extrusion and mold flow. Since the mastication effect is slower than with common peptizing agents, fewer break downs of polymer chains can be observed, resulting in better physical and dynamic properties. ULTRA-PEP™ 90 can be added in the masterbatch compound with other compounding ingredients and therefore a pre-mastication step is not needed. As such, additional cost saving could be achieved.

Trecora Chemical CWP500 is a polyethylene wax. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Imparts a non-stick character to a coating that decreases the tendency for blocking. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CWP500 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical CHU561 is a polyethylene wax. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax.

EVERNOX-B210 is used in polyolefins and olefins-copolymers such as LDPE, HDPE, LLDPE, PP and EVA. It can also be used in other polymers such as engineering plastics, styrene homo and copolymers such as PBT, PET, PA, POM, PS, ABS, PUR, elastomers BR, SBR, SBS, adhesives and other organic substrates. The B-blends can be used in combination with light stabilizers of UV-absorbers and hindered amine light stabilizers.

EVERNOX-B1412 is used in polyolefins and olefins-copolymers such as LDPE, HDPE, LLDPE, PP and EVA. It can also be used in other polymers such as engineering plastics, styrene homo and copolymers such as PBT, PET, PA, POM, PS, ABS, PUR, elastomers BR, SBR, SBS, adhesives and other organic substrates. The B-blends can be used in combination with light stabilizers of UV-absorbers and hindered amine light stabilizers.

Golden Dragon Chemicals ACR-JX series products are the new generation of acrylate macromolecule copolymer. It was produced by using advanced polymerization and desiccation technical on the bases of our years producing experience. As it has low dust, non-corrosive, excellent fluidity and don’t dissolve in water, it was considered to be an ideal processing modifier of PVC.

Cel-Span® Process Aid 101 is a 100% active (powder or pellet) internal lubricant processing aid with anti-static properties that are incorporated into the resin. Cel-Span® Process Aid 101 eliminates the need for an external mold release agent and improves resin flow, dispersion, resin additives ex:(reinforcements, fillers, and pigments), and reduces cycle time. The use of Cel-Span® Process Aid 101 will not have an adverse effect on the physical properties. Compatible with Polyethylene, Polystyrene, and Polypropylene.

EVERNOX-B201 is used in polyolefins and olefins-copolymers such as LDPE, HDPE, LLDPE, PP and EVA. It can also be used in other polymers such as engineering plastics, styrene homo and copolymers such as PBT, PET, PA, POM, PS, ABS, PUR, elastomers BR, SBR, SBS, adhesives and other organic substrates. The B-blends can be used in combination with light stabilizers of UV-absorbers and hindered amine light stabilizers.

Cel-Span® Process Aid 333 is a compounded product intended for clear films containing a high level of thermal stabilizers to provide protection of film resins during high temperature extrusion and lamination processes, thus maximizing inherent the natural resins. Cel-Span® Process Aid 333 eliminates build up in both internal and external metal surfaces of the extrusion die, as well as reduction of wrinkles in thin gage films.

Trecora Chemical CWP130X is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CWP130X by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical OX-18 is an oxidized polyethylene wax. Provides anti-block, release and gloss control properties. It is easily emulsified. Imparts a non-stick character to a coating that decreases the tendency for blocking. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-18 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical CHU610 is a polyethylene wax. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CHU610 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Cel-Span® Process Aid 305 contains a powerful water-seeking additive that chemically combines and eliminates lensing and porosity in blown and cast extrusion, injection, compounding, and pipe applications caused by surface moisture or incorporated into the resin during processing. CelSpan® Process Aid 305 contains a very effective additive that chemically traps water to eliminate moisture. This product can be used to eliminate moisture in high temperature engineering resins such as nylon and is utilized by metering in at 2% - 5% depending on the level of moisture.

ULTRA-LUBE™ 480 is a highly effective processing additive for specialty polymers. Its unique structure is particular suitable to improve flow and release of ECO compounds resulting in lower reject rate due to poor hot tear of ECO vulcanisates. Besides, it helps in preventing mold fouling. ULTRA-LUBE™ 480 also works very well to improve extrusion characteristics of NBR/PVC blend compounds.

ULTRA-LUBE™ 420 is a processing additive for applications in all elastomers. ULTRA-LUBE™ 420 provides very good lubricating effects and helps to improve flow and mold release. ULTRA-LUBE™ 420 shows excellent performance in highly filled EPDM compounds. No adverse effect on physicals is noted and its saturated structure makes it suitable for peroxide vulcanisation.

EVERNOX-B310 is used in polyolefins and olefins-copolymers such as LDPE, HDPE, LLDPE, PP and EVA. It can also be used in other polymers such as engineering plastics, styrene homo and copolymers such as PBT, PET, PA, POM, PS, ABS, PUR, elastomers BR, SBR, SBS, adhesives and other organic substrates. The B-blends can be used in combination with light stabilizers of UV-absorbers and hindered amine light stabilizers.

Cel-Span® Process Aid 705 is a product recommended as a replacement for the traditional phenolic and hindered amine combination for the thermal and ultraviolet stabilization of polyester resins during high temperature processing. Cel-Span® Process Aid 705 enhances the process window of Polyester and PET resins. In addition, this product maintains the IV (Intinsic Viscosity) of Polyester and PET resins coupled with excellent UV stability. Cel-Span® Process Aid 705 also provides protection to caustic environment and bleach resistance to Polyester and PET resins with both bottle and fiber grade products. It is important that this product be used at 2% - 3% with the Polyester or PET resin before the fabrication or molding process to take advantage of the excellent properties of the unique masterbatch. It will insure that the polyester resin is protected through the molding and life cycle of the parts

Cel-Span® Process Aid 701 is a molecular concentrate used as a replacement for the traditional metal halides for stabilization of Nylons at high temperatures. This product is used at 1% - 3% active level depending on the type of compound and processing conditions. Cel-Span® Process Aid 701 also provides gloss, ozone, and bleach resistance to nylon fibers, without the use of metal halide stabilizers.

ULTRA-LUBE™ 790 is a processing additive designed as an internal lubricant for specialty polymers. Due to its low volatility, it can be used in heat resistant vulcanisates based on HNBR, ACM and FKM. ULTRA-LUBE™ 790 shows excellent lubricating properties, which leads to reduction of injection pressure in the molding process and prevents scorch. Its outstanding release effect also improves mold release and prevents sticking of compounds to rolls and rotors. ULTRA-LUBE™ 790 is very cost effective because it greatly reduces the reject rates of vulcanisates.

ULTRA-PEP™ 96 is a combined peptizing and processing additive for natural rubber. ULTRA-PEP™ 96 is easily dispersed in rubber due to its content of dispersing agent present. ULTRA-PEP™ 96 is extremely active and therefore can be used at low dosage levels. Its peptizing action starts at 90 °C but reaches an optimum at 140°C.

ULTRA-LUBE™ 330 is a general processing additive in most common polymers. In highly filled compounds ULTRA-LUBE™ 330 prevents the agglomeration of filler, which leads to better uniformity of physical properties of the finished goods. This is particularly beneficial for extrusion of rubber profiles. The addition of ULTRA-LUBE™ 330 leads to faster incorporation of filler. ULTRA-LUBE™ 330 shows a positive influence on metal release, thus preventing sticking of the compounds to open mill rolls or internal mixer rotors. It also improves mold release.

EVERNOX-B401 is used in polyolefins and olefins-copolymers such as LDPE, HDPE, LLDPE, PP and EVA. It can also be used in other polymers such as engineering plastics, styrene homo and copolymers such as PBT, PET, PA, POM, PS, ABS, PUR, elastomers BR, SBR, SBS, adhesives and other organic substrates. The B-blends can be used in combination with light stabilizers of UV-absorbers and hindered amine light stabilizers.