Products in Automotive & Transportation: Antioxidant

Johoku Chemical JP-308E is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.

Nanjing Shuguang Chemical Group Antioxidant SG-R 601 has good anti-oxidation performance. It has both anti-oxidation as HALS has， and noncontamination as phenolic antioxidant has. It is widely used in natural or synthetic rubbers to replace antioxidants with contamination and toxicity. SG-R 601 is a highly effective, nontoxic, low cost rubber antioxidant, has excellent heat and oxidation resistance, can improve fatigue damage of crosslinked rubber under many cycles flexible distortion condition, and has good synergistic effect with antioxidant RD, 4010 to improve aging resistance and tear resistance, so it is used in manufacturing many kinds of rubber products such as tires, rubber hoses, rubber belts, rubber shoes and latex products. The common dosage is 1%-3%. It can also be applied to colored products of polyethylene, polyamide, polypropylene and cellulose. SG-R 601 also acts as stabilizer for various synthetic rubbers, the dosage is 0.5%~1.5%. In view of its poor anti-sunlight performance, it should be avoided to be used under sunlight.

Makrostab® Thermo 3069 are masterbatches containing antioxidants intended to improve the processing, long-term heat or other, special, thermooxidative stability of the polymer. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

HECO® NOX 603 PP is an antioxidant mixture with thermal stabilizer in PP acc. to EU-RL 10/2011 (ff), US - FDA and Pharmacopeia.

PowerNox™ 2266 contains a chemical name called Bis(3,5-di-tert-butyl-2-hydroxyphenyl)methane.

SUNOX® 592 is a synergistic blend of high performance phosphite antioxidant and radicals capture agent. This product has excellent synergistic effect, so it can provide efficient processing protection at high temperature.

The use levels of EVERSTAB-FS042 range between 0.05% and 0.15% are recommended for protection. It depends on the substrate and performance requirements of the final application.

JYANOX 1135 Antioxidant is an excellent antioxidant for various polymers.

Shandong Stair Chemical & Technology Rubber antioxidant 4010NA (IPPD) is used in vehicle tires, shoes and belt products.

Rayton Chemicals 3100 is Greeen Black Powder.

Plaox 168 is a kind of phosphite ester antioxidant. It has a good synergistic with other antioxidants, for example, Plaox-1010, and Plaox-1076. It is widely used for PE, PP, PC resin, etc. The dosage is recommended to be 0.1 ~ 1.0 phr. Plaox-168 can be used in food contact plastics.

Polyfill Technologies TiO2 White Masterbatch PT-2070 is manufactured by blending high quality TiO2 powder in polyethylene of high melt flow index in presence of additives like Antioxidant, Dispersing agent and Dessiccant. PT-2070 has been specially designed for Poly film, Injection Molding and Extrusion process.

Sinobase Polymers Chemical 944 is an HALS characterized by extremely low volatility, high thermal stability and excellent compatibility with many substrates. Its oligomeric structure make it particularly effective when use in thin section articles such as fiber and film. It is suited for use in polypropylene, LDPE, HDPE,XPE,EVA and PP blends with elastomers.

Chemical name of Sinorgchem 6PPD+7PPD is N-(1,3-Dimethyl butyl)-N'-PhenylrightPhenylenediamine andN-(1,4-Dimethylpentyl)-N'-PhenylrightMixture of phenylenediamine.

Puyang Changyu Petroleum Resins MBZ Powder is a non-staining secondary antioxidant for NR, CR, EPR, SBR, NBR, etc. Especially effective against heat oxidation in combination with amine. Could be used alone or combined with the anti-degradants, such as DNR or AP.

Puyang Changyu Petroleum Resins NDBC Powder is used as accelerator for most sulfur-cured elastomers, can provide ozone resistance in dynamic application, as excellent anti-oxidant in usual application. NDBC can protect CR, CSM, CO, ECO from oxygen and also used for EPDM and CSM vulcanized rubbers and colored CR products.

PowerNox™ 2450 contains a chemical name called Triethylene glycol-bis-3-(3-tert-butyl-4-hydroxy-5-methylphenyl) propionate.

SUNOVIN® 5586 is a substituted benzoate that absorbs ultraviolet radiation and through a reversible chemical rearrangement, dissipates the energy as heat. Provides antioxidant activity both during thermal processing and in moderate elevated temperatures due to radical scavenging mechanism.

Plaox DSTDP is a thioester auxiliary antioxidant with good performance and with higher antioxidant effect than Plaox-DLTDP. It is of low volatilization, low heat loss in processing, non-polluting and non-discoloring. It has well synergistic of antioxidant Plaox-1010, Plaox-1076. Plaox-DSTDP is widely used for PE, PP, PA, ABS resin, etc. The dosage is recommended to be 0.1 ~1.0 phr.

Mernox TQ is Styrenated Phenol compound which is used as non staining antioxidants in rubber industry.

Rayton Chemicals NBC is Greeen Black Powder.

AO 1076 is a nonpolluting nontoxic Antioxidant with good heat‐resisting and water‐extracting performance. Widely applied to polyolefine, polyamide, polyester, polyvinyl chloride, ABS resin，synthesize rubber and petroleum product, often used with DLTP for promoting the antioxidative effect.

BNX DLTDP (123-28-4)is a thioether antioxidant. High solubility and superior properties make it particularly suitable for the protection of plastics, rubber, synthetic fibers, and petroleum products against deterioration and discoloration. Used in combination with phenolic primary antioxidants, it has proven particularly effective as a result of synergistic effects.

Richon® ANTIOXIDANT 4020(6PPD) is an antioxidant used for rubber products with high efficiency, low poison and low solvent-extraction amount. Also used as stabilizer in synthetic rubber which is widely applied in many kinds of rubber products. Soluble in gasoline, benzene, acetone etc. It will become black on exposure to air, but there is no effect on its properties. Due to low melting point, it should be stored away from high temperature..

Kemai Chemical ANTIOXIDANT PAN (A) is used in natural rubber, synthetic rubber field. It' used for making tire, rubber tubes, shoes, and other black industrial rubber products. It has good preventing performance caused by heat, oxidiaing and wind, It can be used lonely and also be used with other antioxidants as gelata.

Everaox® 1010 has a long-term thermal stability and is a multifunctional antioxidant.

ADK STAB 1178 also called TNPP can be applied in polyolefins, ABS, PS, and engineering plastics.

Everaox® 102 has excellent performance for engineering polymers and good color stability.

Banox H has chemical composition of Polimerized 1,2-dihydro 2,2,4-trimethylquinoline and it is in the form of pastilles

Everaox® 204 is phenol free and used as flame retardant for PU applications.

EVERNOX-1098 is a sterically hindered phenolic antioxidant of highly effective, non-discoloring stabilization for organic materials. It protects these materials against thermo-oxidative degradation. EVERNOX-1098 is especially recommended for use in polyamide molded parts, fibers, and films. It can also be used with various polymers such as polyacetals, polyesters, polyurethanes, adhesives, elastomers as well as other organic substrates. EVERNOX-1098 has good compatibility, high resistance to extraction and low volatility. It provides excellent processing and long-term thermal stability as well as superior initial resin color. It can be used in combination with other additives such as costabilizers (e.g. phosphites, thioesters), light stabilizer (e.g. UV absorbers, hindered amines), and other functional stabilizers. The synergistic blends of EVERNOX-1098 with EVERFOS-168 (also called EVERNOX-B1171) provide a great performance in polymer stabilization.

EVERNOX-B310 is used in polyolefins and olefins-copolymers such as LDPE, HDPE, LLDPE, PP and EVA. It can also be used in other polymers such as engineering plastics, styrene homo and copolymers such as PBT, PET, PA, POM, PS, ABS, PUR, elastomers BR, SBR, SBS, adhesives and other organic substrates. The B-blends can be used in combination with light stabilizers of UV-absorbers and hindered amine light stabilizers.

Richon® Rubber Antioxidant IPPD(4010) is dissolves in the oil class, the acetone, the benzene, the carbon tetrachloride carbon, the carbon bisulfide, and the ethyl alcohol, difficult to dissolve in the gasoline. If it is exposes under the air and the sunlight will change color. It is mainly used in manufacture of tires, rubber shoes and other rubber products..

Textile Rubber & Chemical Antioxidant D404 ball milled dispersion of antioxydant 2246.

Sirubtis™ HD OT 20 is 20% Oil-filled, highly dispersible insoluble sulfur.