Products in Tires: Polyurethane (unspecified)

9 Products found in Tires

Ebalta Kunststoff Gmbh GM 971 85Comp. A+B banner

Ebalta Kunststoff GmbhEbalta Kunststoff Gmbh GM 971 85Comp. A+B

Polymer Name:Polyurethane (unspecified)
Processing Methods:Casting
End Uses:Tubing, Flexible Grips, Tires, Mold Making
Density:1090.0 - 1130.0 kg/m³
Tensile Strength:14.0 - 18.0 MPa

This product is a polyurethane system. Mechanical data according to test pieces post-cured for 8 hrs. at 80°C. No heavy chemical and mechanical stress before 7 days after curing at room temperature (20-23°C).

Ebalta Kunststoff Gmbh GM 956GM 956 45 banner

Ebalta Kunststoff GmbhEbalta Kunststoff Gmbh GM 956GM 956 45

Polymer Name:Polyurethane (unspecified)
End Uses:Tubing, Flexible Grips, Tires
Density:1020.0 - 1060.0 kg/m³
Tensile Strength:3.1 - 3.9 MPa

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Ebalta Kunststoff Gmbh GM 971 75Comp. A+B banner

Ebalta Kunststoff GmbhEbalta Kunststoff Gmbh GM 971 75Comp. A+B

Polymer Name:Polyurethane (unspecified)
Processing Methods:Casting
End Uses:Tires, Mold Making, Tubing, Flexible Grips
Density:1090.0 - 1130.0 kg/m³

This product is a polyurethane system. Mechanical data according to test pieces post-cured for 8 hrs. at 80°C. No heavy chemical and mechanical stress before 7 days after curing at room temperature (20-23°C).

Ebalta Kunststoff Gmbh GM 956GM 956 70 banner

Ebalta Kunststoff GmbhEbalta Kunststoff Gmbh GM 956GM 956 70

Polymer Name:Polyurethane (unspecified)
End Uses:Tubing, Tires
Density:1020.0 - 1060.0 kg/m³
Tensile Strength:4.6 - 5.6 MPa

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Ebalta Kunststoff Gmbh GM 968 Comp. A+B banner

Ebalta Kunststoff GmbhEbalta Kunststoff Gmbh GM 968 Comp. A+B

Polymer Name:Polyurethane (unspecified)
Processing Methods:Casting
End Uses:Tubing, Flexible Grips, Tires, Mold Making
Density:1020.0 - 1060.0 kg/m³
Tensile Strength:4.2 - 5.8 MPa

This product is a Polyurethane system If the product is cured at room temperature, no entire chemical and mechanical load before 7 days after curing.

Ebalta Kunststoff Gmbh GM 956GM 956 30 banner

Ebalta Kunststoff GmbhEbalta Kunststoff Gmbh GM 956GM 956 30

Polymer Name:Polyurethane (unspecified)
End Uses:Tires, Tubing, Flexible Grips
Density:1020.0 - 1060.0 kg/m³
Tensile Strength:2.0 - 2.4 MPa

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Ebalta Kunststoff Gmbh GM 956 90Comp. A+B banner

Ebalta Kunststoff GmbhEbalta Kunststoff Gmbh GM 956 90Comp. A+B

Polymer Name:Polyurethane (unspecified)
End Uses:Tires, Tubing, Flexible Grips
Density:1030.0 - 1070.0 kg/m³
Tensile Strength:6.0 - 8.0 MPa

This product is a polyurethane system. "VP"-products are experimental products. Regarding technical data slight modifications are possible.

Ebalta Kunststoff Gmbh GM 956GM 956 80 banner

Ebalta Kunststoff GmbhEbalta Kunststoff Gmbh GM 956GM 956 80

Polymer Name:Polyurethane (unspecified)
End Uses:Tires, Tubing, Flexible Grips
Density:1020.0 - 1060.0 kg/m³
Tensile Strength:7.0 - 9.0 MPa

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.

Ebalta Kunststoff Gmbh GM 956GM 956 60 banner

Ebalta Kunststoff GmbhEbalta Kunststoff Gmbh GM 956GM 956 60

Polymer Name:Polyurethane (unspecified)
End Uses:Tires, Tubing, Flexible Grips
Density:1020.0 - 1060.0 kg/m³
Tensile Strength:4.5 - 5.5 MPa

This product is a polyurethane system. After use please close the containers carefully. The product can be subject to color variations due to raw materials, but these color variations have no influence on the quality and the properties of the product. Seal porous mold surfaces first (ebalta mold sealer). For optimum mold releasing we recommend a special release agent (like T1-1), which can be applied easily with a brush or be sprayed. Releasing of the mold 2-3 times, evaporate for about 20 min. after each releasing.