Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Automotive & Transportation
Automotive
Seating
Products in Seating: Polyamide 6 (PA 6)
30 Products found in Seating
Filters
Suppliers
Product Families
End Uses
Functions
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
Envalior
Akulon® K224-PG8
Polymer Name:
Polyamide 6 (PA 6)
Chemical Family:
Polyamides
Reinforcement Material:
Glass Fibers
Fillers Included:
Glass Fiber
Processing Methods:
Injection Molding
Akulon® K224-PG8 is a polyamide 6 (PA 6) resin utilized in composite materials and plastics, featuring impact modification and lightweight properties. It is applied in various sectors, including consumer goods (appliances and electronics, furniture), automotive, and transportation (chassis, brakes, exterior, interior, safety systems, seating).
Johns Manville
Johns Manville Advanced Composites OS-6 Organosheet
Applications:
Equipment & Parts, Pipes & Tanks, Seating
Product Families:
Thermoplastic Prepregs, Prepregs & Molding Compounds
Polymer Name:
Polyamide 6 (PA 6)
End Uses:
Rear Differential Cover, Seat Pan, Brake Pads
The OS-6 series are nylon 6 thermoplastic organosheets that contain woven fabrics as heavy as 2,500 g/m2. The composite sheets characterized by high strength and stiffness."
Eurotec Engineering Plastics
Tecomid® NB40 NL E
Polymer Name:
Polyamide 6 (PA 6)
Tecomid® NB40 NL E by Eurotec Engineering Plastics is comprised of Polyamide 6. It is commonly used
Eurotec Engineering Plastics
Tecomid® NB40 GR15 NL HS
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Glass Fiber
Additives Included:
Heat Stabilizer
Tecomid® NB40 GR15 NL HS by Eurotec Engineering Plastics is comprised of Polyamide 6. It is commonly used
Barnet
Envir® PA6G33TL-BK0801
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Glass Fiber
Flexural Modulus:
9650.0 - 9650.0 MPa
Envir® PA6G33TL-BK0801 is a 33% Glass fiber reinforced Nylon 6 molding resin. 6G33TL is optimized for large part setup and demolding while providing a good balance of flow and mechanical properties. It is provided Black in color.
Loxim
LOXIAMID PA6 LU HS1 03029
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Flexural Modulus:
2800.0 - 2800.0 MPa
LOXIAMID PA6 LU HS1 03029 is an injection molding grade of lubricated Polyamide 6 resin.
Barnet
Envir® PA6G30L-BK0704
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Glass Fiber
Flexural Modulus:
8990.0 - 8990.0 MPa
Envir® PA6G30L-BK0704 is a 30% Glass fiber reinforced Nylon 6 molding resin. 6G30L is an excellent utility grade compound that is optimized for properties, process and economics. It is provided Black in color.
Barnet
Envir® PA6N3L-BK0305
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Glass Fiber
Flexural Modulus:
3030.0 - 3030.0 MPa
Envir® PA6N3L-BK0305 is a General Purpose Nylon 6 molding resin. 6N3L is Nucleated and Lubricated for fast molding cycle times and easy processing. It is provided Black in color.
Loxim
LOXIAMID PA6 LU HS1 03004
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Flexural Modulus:
2500.0 - 2500.0 MPa
LOXIAMID PA6 LU HS1 03004 is an injection molding grade of lubricated Polyamide 6 resin.
Nylene
Nylene® Mach 6
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Flexural Modulus:
2900.0 - 2900.0 MPa
Nylene Designed for very fast cycle time molding and parts requiring high flow rates, such as long thin parts or high cavitation tools Low viscosity nylon 6 with special nucleation for rapid part set-up and special flow enhancers to aid in molding Excellent choice for parts such as wire ties, clips, fasteners, bushings and bearings
Nylene
Nylene® 204 HS
Polymer Name:
Polyamide 6 (PA 6)
Additives Included:
Heat Stabilizer
Flexural Modulus:
2760.0 - 2760.0 MPa
Nylene Heat stabilized version general purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up In addition to protection from heat degradation, parts molded from NYLENE 204 HS have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Suitable for molding clip and fasteners, bushings, spacers, and other general purpose applications
Loxim
LOXIAMID PA6 LU HS1 03008
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Flexural Modulus:
2500.0 - 2500.0 MPa
LOXIAMID PA6 LU HS1 03008 is an injection molding grade of lubricated Polyamide 6 resin.
Nylene
Nylene® 721
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Additives Included:
Impact Modifier
Flexural Modulus:
2170.0 - 2170.0 MPa
Nylene Medium-impact modified nylon for fast, easy molding Parts molded from 721 have good impact strength right out of the mold without post conditioning Suitable for applications such as clips, fasteners, and other parts where some initial flexibility and impact resistance is desired Cylinder temperatures should be in the 450°F-500°F range.
Nylene
Nylene® NX4569
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Additives Included:
Nucleating Agent, Lubricant (Unspecified)
Flexural Modulus:
2620.0 - 2620.0 MPa
Nylene General purpose injection molding resin. Lubricated and nucleated for faster cycle times Suitable for applications such as clips & fasteners, bushings & rollers, and other general purpose uses
Barnet
Envir® PA6G3OHL-BK0701
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Glass Fiber
Flexural Modulus:
9630.0 - 9630.0 MPa
Envir® PA6G3OHL-BK0701 is a 30% glass fiber reinforced nylon 6 molding resin, it is heat stabilized and hydrolysis resistant. 6G30HL is optimized for properties and processability. It is provided black in color.
Nylene
Nylene® 451
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Flexural Modulus:
2690.0 - 2690.0 MPa
Nylene Recommended for molding applications requiring both maximum durability and toughness Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle
Nylene
Nylene® NX-1440C
Polymer Name:
Polyamide 6 (PA 6)
Additives Included:
Nucleating Agent
Flexural Modulus:
2895.0 - 2895.0 MPa
Nylene Medium viscosity, fast cycle molding resin.Crystallization initiators provide fast molding cycles through rapid melt set-up.Parts molded from NX1440 have better dimensional stability at moisture equilibrium than parts molded from conventional nylon.Suitable for such uses as clips and fasteners, bushings, small levers, gears, and window hardware.Optimum processing conditions should provide a melt temperature of 460 - 480°F at the nozzle.
BARLOG plastics GmbH
Kebablend® / TC FE 190205/1 PA6
Polymer Name:
Polyamide 6 (PA 6)
KEBABLEND / TC FE 190205 PA6 is a special compound based on PA6, which is thermally conductive and electrically insulating.
Plastcom, spol. s r.o.
SLOVAMID 6 BT
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Flexural Modulus:
2700.0 - 2700.0 MPa
PA 6 basic type
Nylene
Nylene® 454
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Additives Included:
Heat Stabilizer
Flexural Modulus:
2690.0 - 2690.0 MPa
Nylene Heat stabilized version of NYLENE 451 recommended for molding - Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle
Loxim
LOXIAMID PA6 LU HS1 03005
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Flexural Modulus:
3000.0 - 3000.0 MPa
LOXIAMID PA6 LU HS1 03005 is an injection molding grade of lubricated Polyamide 6 resin.
Loxim
LOXIAMID PA6 LU HS1 03007
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Flexural Modulus:
2500.0 - 2500.0 MPa
Loxiamid PA6 LU HS1 03007 is an injection molding grade of lubricated Black Polyamide 6 resin.
Barnet
Envir® PA6G33-BK1304
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Glass Fiber
Flexural Modulus:
10900.0 - 10900.0 MPa
Envir® PA6G33-BK1304 is a 33% Glass fiber reinforced Nylon 6 molding resin. PA6G33 is an excellent utility grade compound that is optimized for high properties. It is provided Black in color.
Nylene
Nylene® PX1719
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Extrusion, Profile Extrusion, Injection Molding
Additives Included:
Impact Modifier
Flexural Modulus:
655.0 - 655.0 MPa
Nylene Highly impact modified nylon 6 resin. PX1719 has very low stiffness for a nylon type resin Can be processed by either injection molding or extrusion Suitable for clips, fasteners, and also tubing and profiles, or any other uses where high impact resistance and maximum flexibility are required
Loxim
LOXIAMID PA6 LU HS1 03057
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Flexural Modulus:
2800.0 - 2800.0 MPa
LOXIAMID PA6 LU HS1 03057 is an injection molding grade of lubricated Polyamide 6 resin.
Barnet
Envir® PA6G33VL-BK0801
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Glass Fiber
Flexural Modulus:
9650.0 - 9650.0 MPa
Envir® PA6G33VL-BK0801 is a 33% Glass fiber reinforced Nylon 6 molding resin. It is a Value added “upcycled” compound with a good balance of properties. 6G33VL incorporates a high recycled material content, giving it a truly “green” appeal. It is provided Black in color.
Nylene
Nylene® 321 HS
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Additives Included:
Impact Modifier, Heat Stabilizer
Flexural Modulus:
1930.0 - 1930.0 MPa
Nylene Impact modified, heat stabilized nylon 6 injection molding resin. Inherent heat and chemical resistance typical of nylon 6 resins, while having higher toughness for uses where some impact may occur during service Suitable for such applications as clips, fasteners, safety restraint components, and uses which require higher toughness and flexibility
Loxim
LOXIAMID PA6 LU HS1 03003
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Flexural Modulus:
2500.0 - 2500.0 MPa
LOXIAMID PA6 LU HS1 03003 is an injection molding grade of lubricated Polyamide 6 resin.
Unifi INC
REPREVE® Recycled Nylon 6
Polymer Name:
Polyamide 6 (PA 6)
Labeling Claims:
Recycled, Natural, Contains PIR Resin
REPREVE® Recycled Nylon 6 opens up a world of possibilities for companies wanting to use recycled high-quality nylon materials. For every 1 lb, of REPREVE® Nylon, 77,000 BTU'S (British Thermal Units) are conserved, equivalent to 0.6 gallons of gasoline. Pre-consumer fiber waste is collected. Collected waste then enters a unique material conversion process where it is reformulated to produce a first quality REPREVE® Recycled Nylon 6 chip. REPREVE Nylon 6 does not contain post-consumer plastics.
Nylene
Nylene® 421 HS
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Additives Included:
Heat Stabilizer, Impact Modifier
Flexural Modulus:
1725.0 - 1725.0 MPa
Nylene Impact modified, heat stabilized nylon 6 injection molding resin. Nylene 421 HS has the inherent heat and chemical resistance typical of nylon 6 resins, while having higher toughness for uses where impact may occur during service Suitable for such applications as clips, fasteners, safety restraint components, and uses which require higher toughness and flexibility